HR11+ Aringa - Barcode Reader Newland - Free user manual and instructions
Find the device manual for free HR11+ Aringa Newland in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Brand | Newland |
| Model | HR11+ Aringa |
| Scanning Technology | 2D Imager (CMOS) |
| Supported Barcodes | 1D: All standard symbologies; 2D: PDF417, Data Matrix, QR Code, etc. |
| Scan Rate | Up to 300 scans/sec |
| Interface | USB (HID Keyboard, Virtual COM, or USB Hub) |
| Dimensions (L x W x H) | 165 x 73 x 98 mm |
| Weight | 170 g (without cable) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5 m (5 ft) to concrete |
| Ingress Protection | IP52 |
| LED Indicators | Red/Green/Blue; Good read, power, status |
| Material | Polycarbonate housing |
| Cable Length | 2.0 m (6.6 ft) straight USB cable |
| Power Consumption | 2 W (operating); < 0.5 W (standby) |
| Warranty | 1 year limited (extendable) |
Frequently Asked Questions - HR11+ Aringa Newland
What barcode symbologies does the Newland HR11+ Aringa support?
The HR11+ supports all major 1D symbologies (UPC/EAN, Code 128, Code 39, Interleaved 2 of 5, etc.) and 2D codes such as QR Code, Data Matrix, PDF417, and Aztec.
How do I connect the scanner to my computer?
Connect the USB cable to your computer. The scanner will be recognized as a HID keyboard device. You may need to configure the interface mode in the Quick Start Guide.
Can I scan barcodes from a mobile phone screen?
Yes, the HR11+ is optimized for scanning from screens. Ensure the screen brightness is at least 50%. It supports digital barcodes on phones and tablets.
What is the reading distance for 2D barcodes?
Typical reading range: 10 cm to 30 cm for standard QR codes (15 mil). For larger codes or high-density, distances vary. Check the product specifications for details.
Does the scanner have a stand for hands-free operation?
The HR11+ is handheld and can be used in hand. For hands-free, an optional stand or holder may be purchased separately.
How do I clean the scanner’s window?
Use a soft, lint-free cloth slightly moistened with isopropyl alcohol. Avoid abrasive cleaners. Clean the window gently to avoid scratches.
What should I do if the scanner stops scanning?
First, check the USB connection. Then try re-scanning a configuration barcode from the manual to reset the scanner. If issue persists, contact Newland support.
Is the HR11+ compatible with Mac OS?
Yes, it works as a HID keyboard on Mac OS without additional drivers. Some features may require configuration barcodes for Mac-specific settings.
How can I enable or disable a scan mode (continuous, pulsed)?
Scan the appropriate configuration barcode from the user manual. Common modes: ‘Presentation Mode’ for hands-free and ‘Trigger Mode’ for manual scanning.
Where can I download the full manual?
The user manual is available on notice-facile.com in PDF format. You can also request a translated version via email.
User questions about HR11+ Aringa Newland
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual HR11+ Aringa - Newland and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR11+ Aringa by Newland.
USER MANUAL HR11+ Aringa Newland
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Newland
Model : HR11+ Aringa
Category : Barcode Reader