HYC6200X - Saw HYUNDAI - Free user manual and instructions
Find the device manual for free HYC6200X HYUNDAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Hyundai |
| Model | HYC6200X |
| Power Source | Corded Electric |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power Input | 1600 W |
| No-Load Speed | 5000 RPM |
| Blade Diameter | 190 mm (7-1/2 inch) |
| Arbor Size | 20 mm |
| Cutting Depth at 90° | 65 mm |
| Cutting Depth at 45° | 48 mm |
| Weight | 5.0 kg |
| Dimensions (LxWxH) | 350 x 250 x 200 mm |
| Blade Guard | Yes, retractable |
| Safety Switch | Double-insulated, lock-off |
| Material Cutting | Wood, plastic, soft metals |
| Dust Extraction Port | Yes, 35 mm |
| Maintenance | Blade replacement, brush cleaning |
| Spare Parts Available | Blade, carbon brushes, guard |
| Warranty | 2 years |
Frequently Asked Questions - HYC6200X HYUNDAI
How do I change the blade on my HYC6200X saw?
First, unplug the saw. Press the spindle lock to prevent rotation, then use the provided wrench to loosen the arbor nut. Remove the outer flange and old blade. Install the new blade with teeth facing the rotation direction (arrow on guard). Replace the outer flange and tighten the nut while holding the spindle lock. Ensure the blade is secure before use.
What is the maximum cutting depth of this saw?
The maximum cutting depth at 90 degrees is 65 mm (2.56 inches). At a 45-degree bevel, the depth is 48 mm (1.89 inches). Adjust the depth by loosening the depth adjustment lever and sliding the base plate.
Can I cut metal with the Hyundai HYC6200X?
Yes, but only soft metals like aluminum or thin steel. Use a dedicated metal-cutting blade with appropriate teeth. For ferrous metals, consider a saw with more power or a different blade. Always wear eye protection and reduce cutting speed.
How do I adjust the bevel angle?
Loosen the bevel adjustment knob located near the base. Tilt the base to the desired angle (0–45°). The scale shows degrees. For common angles like 45°, there is a detent. Tighten the knob securely before cutting.
How should I clean and maintain the saw?
After each use, remove dust from the ventilation slots and blade guard with a brush or compressed air. Lubricate the adjustment mechanisms with light oil. Check the carbon brushes every 50 hours of use and replace if worn. Store in a dry place.
Why does my saw stop during operation?
Possible causes: the overload protection tripped (let it cool), the carbon brushes are worn, or the power cord is damaged. Check the brushes by removing the caps; if less than 5mm, replace. Ensure the extension cord is rated for the saw's amperage.
How do I replace the carbon brushes?
Unplug the saw. Locate the brush caps on the motor housing (usually on each side). Unscrew the caps, remove the old brushes, and insert new ones. Ensure they slide freely into the brush holders. Tighten the caps. Run the saw for 5 minutes to seat the brushes.
Is the HYC6200X suitable for plunge cuts?
The saw has a retractable blade guard that allows plunge cuts when the guard is lifted manually. However, for safety, use a plunge-cutting technique: tilt the saw forward, align the blade, then lower it into the material. Ensure the guard returns after the cut.
What safety precautions should I take when using this saw?
Always wear safety glasses and ear protection. Keep hands away from the blade path. Use a ripping fence or guide for straight cuts. Disconnect power before changing blades or adjusting. Never force the blade; let the saw do the work.
How should I store the saw?
Clean the saw thoroughly. Store in a dry, dust-free environment away from children. Use the blade guard cover if available. Coil the power cord loosely. For long-term storage, apply a light coat of oil to exposed metal parts to prevent rust.
User questions about HYC6200X HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual HYC6200X - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HYC6200X by HYUNDAI.
USER MANUAL HYC6200X HYUNDAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HYUNDAI
Model : HYC6200X
Category : Saw