9300 - Uncategorized Dormakaba - Free user manual and instructions
Find the device manual for free 9300 Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dormakaba |
| Model | 9300 |
| Product Type | Door Closer |
| Dimensions (L x W x H) | Approx. 500 x 70 x 50 mm |
| Weight | Approx. 2 kg |
| Power Source | Mechanical (no electrical connection) |
| Closing Speed Adjustment | Yes, via two valves |
| Latching Action | Adjustable |
| Backcheck Function | Yes |
| Mounting Options | Standard arm, top jamb, parallel arm |
| Maximum Door Width | Up to 1100 mm |
| Maximum Door Weight | Up to 120 kg |
| Material | Aluminum alloy body |
| Compliance | EN 1154, ANSI/BHMA A156.4 |
| Temperature Range | -20°C to +60°C |
| Maintenance Interval | Every 6 months |
| Warranty | 5 years (parts) |
| Included Accessories | Mounting template, screws, hex key |
| Spare Parts Available | Yes (springs, valves, arms) |
Frequently Asked Questions - 9300 Dormakaba
How do I adjust the closing speed of the Dormakaba 9300?
Use the two valves on the back of the closer. Turning the sweep valve adjusts the main closing speed, while the latch valve adjusts the final latching speed. Turn clockwise to slow down, counterclockwise to speed up.
What is the maximum door weight the 9300 can handle?
The Dormakaba 9300 is designed for doors up to 120 kg (265 lbs). For heavier doors, consider a larger model.
Can I install this door closer on a fire-rated door?
Yes, the 9300 is UL listed and complies with fire door standards. Ensure the door assembly is also fire-rated.
How do I select the correct mounting arm for my door?
Choose between standard arm (most common), top jamb (for narrow frames), or parallel arm (for overhead stops). Refer to the mounting template for alignment.
What maintenance does the Dormakaba 9300 require?
Periodically check for fluid leaks, tighten screws, and clean the closer. Lubricate pivot points every 6 months with a silicone spray.
Why is my door closer not latching properly?
Insufficient latching speed may be due to a misadjusted latch valve. Turn the latch valve clockwise to increase latching force. Also check door alignment.
Can I install the 9300 on an out-swing door?
Yes, using the parallel arm configuration. Ensure the mounting template is reversed accordingly.
What tools are needed for installation?
You will need a drill, screwdriver, hex key (included), and a tape measure. Use the template to mark holes.
Where can I find replacement parts for the 9300?
Contact Dormakaba authorized distributors or visit their website. Spare parts include springs, valves, and arm assemblies.
How do I know if the closer is properly sized for my door?
Check the size table in the manual. The 9300 is suitable for doors up to 1100 mm wide and 120 kg. For larger doors, a size 6 (Dormakaba 9300-6) might be needed.
User questions about 9300 Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 9300 - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9300 by Dormakaba.
USER MANUAL 9300 Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : 9300
Category : Uncategorized