Connect 702D - Receiver LEA - Free user manual and instructions
Find the device manual for free Connect 702D LEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | LEA |
| Model | Connect 702D |
| Dimensions (W x H x D) | 430 x 60 x 250 mm |
| Weight | 3.2 kg |
| Power Supply | AC 220-240V, 50/60Hz |
| Power Consumption | 120 W (standby: 0.5 W) |
| Audio Output Power | 5 x 100 W (8 ohms, 1 kHz, 1% THD) |
| Supported Audio Formats | MP3, WMA, AAC, FLAC, WAV |
| Video Support | HDMI 2.0, 4K passthrough, HDR10 |
| Inputs | 4x HDMI, 2x optical, 2x coaxial, 1x RCA (AUX) |
| Outputs | 1x HDMI (ARC), 1x subwoofer pre-out, speaker terminals |
| Connectivity | Bluetooth 5.0, Wi-Fi (802.11ac), Ethernet |
| Radio Tuner | FM/AM with RDS |
| Remote Control | Included (IR) |
| Display | LCD with white characters |
| Operating Temperature | 5°C to 35°C |
| Cleaning | Wipe with dry soft cloth; avoid solvents |
| Safety | Overload protection, thermal cutoff |
| Repairability | User replaceable fuse; service by qualified technician |
| Accessories | Power cord, remote, batteries, FM antenna |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - Connect 702D LEA
How do I connect the LEA Connect 702D to my TV?
Use an HDMI cable from the TV's HDMI ARC port to the receiver's HDMI OUT (ARC) port. Then select the correct input on the receiver using the remote.
Can I play music via Bluetooth?
Yes, press the Bluetooth button on the remote or front panel. Enable Bluetooth on your device and select 'LEA Connect 702D' from the list.
How do I set up the FM radio?
Connect the included FM antenna to the FM ANT terminal. Press the BAND button to select FM. Use the tuning knob or auto scan to find stations.
The receiver won't turn on. What should I do?
Check that the power cord is securely plugged in and the wall outlet is active. Ensure the POWER button on the front panel or remote has been pressed. If still off, check the fuse.
How do I connect external speakers?
Use speaker wire to connect each speaker to the corresponding terminals (FRONT L/R, CENTER, SURROUND L/R). Ensure polarity (+/-) matches, and do not short wires.
What is the maximum power output per channel?
The LEA Connect 702D delivers 100 watts per channel at 8 ohms, with 1% THD, for a 5-channel system.
Can I use the receiver with a 4K TV?
Yes, the HDMI inputs support 4K video passthrough at 60Hz with HDR10. Ensure you use high-speed HDMI cables.
How do I perform a factory reset?
Turn off the receiver. Press and hold the STANDBY button on the front panel for 5 seconds. The display will show 'RESET' and the unit will restart.
Why is there no sound from the center speaker?
Check that the speaker is properly connected. Ensure the CENTER speaker level is not set to zero in the speaker setup menu. Also verify the audio source contains a center channel.
How do I update the firmware?
Firmware updates are available via the LEA website. Download the file to a USB flash drive (FAT32). Insert the USB into the receiver, press SETUP, navigate to 'Firmware Update', and follow prompts.
User questions about Connect 702D LEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Connect 702D - LEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Connect 702D by LEA.
USER MANUAL Connect 702D LEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEA
Model : Connect 702D
Category : Receiver