Connect 352D - Receiver LEA - Free user manual and instructions
Find the device manual for free Connect 352D LEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Receiver |
| Brand | LEA |
| Model | Connect 352D |
| Category | Receiver |
| Dimensions (W x H x D) | 30 cm x 5 cm x 20 cm |
| Weight | 1.5 kg |
| Power Supply | DC 12V, 1.5A |
| Power Consumption | 15 W (max) |
| Display | LED, 4-digit |
| Connectivity | HDMI, SCART, USB, Coaxial Audio, RF In |
| Supported File Formats | MPEG-2, MPEG-4, H.264, AAC, MP3 |
| Channel Storage | Up to 5000 channels |
| Remote Control | Infrared, 20 key |
| Warranty | 1 year |
| Package Contents | Receiver, Remote Control, Power Adapter, HDMI Cable, User Manual |
Frequently Asked Questions - Connect 352D LEA
How do I connect the receiver to my TV?
Use an HDMI cable to connect the HDMI port of the receiver to your TV's HDMI input. Alternatively, you can use a SCART cable if your TV has a SCART port.
How can I scan for channels?
Go to the Menu > Installation > Auto Scan. Ensure the antenna is connected properly and select your region or satellite. The receiver will automatically find and store available channels.
The remote control is not working. What should I do?
First, check the batteries in the remote and replace if needed. Make sure there are no obstacles between the remote and the receiver's IR sensor. If still not working, try resetting the remote by removing batteries and pressing any button for 10 seconds, then reinsert batteries.
Why is there no signal on my screen?
Ensure the antenna is correctly connected and pointed in the right direction. Check the input source on your TV is set to the correct HDMI or SCART input. Run a signal strength test in the receiver's menu to verify reception.
How do I update the firmware?
Download the latest firmware from the LEA website onto a USB flash drive. Insert the USB into the receiver, go to Menu > System > Software Update, and select the USB drive to start the update. Do not power off during update.
Can I reset the receiver to factory defaults?
Yes, go to Menu > System > Factory Reset. Enter the default PIN (usually 0000) and confirm. This will erase all settings and channels, so back up your favorites if possible.
How do I set up parental controls?
Navigate to Menu > Settings > Parental Control. Enable the feature and set a PIN. You can then block channels or set age ratings for content.
What audio formats are supported?
The receiver supports MPEG-1 Audio Layer II, AAC, and MP3 for file playback. For broadcast, it supports Dolby Digital Plus via HDMI.
Why is the video freezing or pixelating?
This is often due to a weak signal. Check your antenna alignment and cable connections. You can also try moving the antenna to a higher location or using a signal amplifier.
How do I connect USB storage?
Insert a USB flash drive (FAT32 format) into the USB port on the receiver. Go to Menu > Media to browse files. You can play recorded programmes or media files like movies and photos from the USB.
User questions about Connect 352D LEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Connect 352D - LEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Connect 352D by LEA.
USER MANUAL Connect 352D LEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEA
Model : Connect 352D
Category : Receiver