ZXP Series 7 - Printer ZEBRA - Free user manual and instructions
Find the device manual for free ZXP Series 7 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Card Printer |
| Brand | Zebra |
| Model | ZXP Series 7 |
| Print Technology | Direct-to-Card Dye-Sublimation / Retransfer (optional) |
| Print Resolution | 300 dpi (11.8 dots/mm) |
| Print Speed | Up to 180 cards per hour (monochrome, single-sided) |
| Card Capacity | Input: 100 cards, Output: 45 cards |
| Card Sizes | CR-80 (ISO), CR-79, CR-90, CR-100, edge-to-edge |
| Dimensions (W x D x H) | 12.5 x 8.5 x 9.5 in (318 x 216 x 241 mm) |
| Weight | 11.5 lb (5.2 kg) |
| Power Supply | Auto-sensing 100-240V AC, 50-60 Hz |
| Energy Consumption | Print: 60W, Standby: 8W |
| Interface | USB 2.0, Ethernet (standard); Wi-Fi (optional) |
| Display | 2.4-inch color touch screen |
| Security Features | Kensington lock slot, user authentication, PIN code |
| Cleaning | Automatic cleaning cycle; manual cleaning kit available |
| Printhead Life | Up to 100,000 cards (standard), replaceable |
| Replacement Parts | Printhead, cleaning roller, ribbon take-up spool |
| Operating Temperature | 59°F to 95°F (15°C to 35°C) |
| Warranty | One year limited warranty (extended available) |
Frequently Asked Questions - ZXP Series 7 ZEBRA
What card types are supported by the Zebra ZXP Series 7?
The ZXP Series 7 supports standard CR-80 cards (ISO) as well as CR-79, CR-90, and CR-100 sizes. It prints edge-to-edge on PVC, composite, and specialty cards.
How do I install the driver for the ZXP Series 7?
Download the latest driver from the Zebra website. Connect via USB or Ethernet, then run the installer. The printer will be recognized as a Zebra ZXP Series 7 in your print settings.
What is the maximum print speed?
The printer can output up to 180 cards per hour (single-sided, monochrome). For full-color single-sided, speed drops to about 140 cards per hour.
How do I clean the printer?
Use the built-in automatic cleaning cycle (accessible via the touch screen). For deep cleaning, use a Zebra cleaning kit (adhesive card) to remove debris from rollers.
Can I print on both sides of the card?
Yes, the ZXP Series 7 supports duplex (dual-sided) printing. You need the retransfer model or an optional flipper unit. Refer to the manual for configuration.
What security features does the printer have?
It includes a Kensington lock slot for physical security, user authentication via PIN, and optional card encoding for access control.
How to replace the printhead?
Turn off the printer, open the hood, release the printhead latch, disconnect the cable, and remove the old head. Install the new one reversing the steps. Calibration may be required.
What is the ribbon / film type for the ZXP Series 7?
Use Zebra YMCKO ribbons (full-color plus black) or monochrome ribbons. The printer also accepts standard Zebra film cartridges.
Why is the printer showing a ribbon empty error?
Check if the ribbon cartridge is correctly inserted or if it has run out. Replace with a new Zebra compatible ribbon. If the error persists, clean the ribbon sensor.
How do I connect the printer via Wi-Fi?
Requires the optional Wi-Fi module. On the touch screen, go to Settings > Network > Wi-Fi, scan for networks, and enter credentials. For setup help, see the network guide.
User questions about ZXP Series 7 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual ZXP Series 7 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZXP Series 7 by ZEBRA.
USER MANUAL ZXP Series 7 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : ZXP Series 7
Category : Printer