WFC3NS - Uncategorized DIMPLEX - Free user manual and instructions
Find the device manual for free WFC3NS DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted fan convector heater |
| Brand | Dimplex |
| Model | WFC3NS |
| Dimensions (H x W x D) | Approx. 450 x 200 x 200 mm |
| Weight | Approx. 5 kg |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Heating Power | 2000 W |
| Fan Speeds | 2 speeds (low/high) plus fan-only mode |
| Thermostat | Adjustable electronic thermostat |
| Safety Features | Overheat protection, tip-over switch, thermal cut-out |
| Mounting | Wall-mounted (bracket included) |
| Control Type | Manual controls on unit or remote control (may vary) |
| Cleaning | Wipe with damp cloth; do not use abrasive cleaners |
| Filter | Washable dust filter (accessible from front) |
| Spare Parts | Filter, fan motor, heating element (contact Dimplex service) |
| Repairability | Repairable by qualified technician; user-replaceable filter |
| Energy Efficiency Class | Class A (typical) |
| Noise Level | Approx. 45 dB (low speed) |
| Warranty | 2 years (check local regulations) |
| Certification | CE, RoHS compliant |
Frequently Asked Questions - WFC3NS DIMPLEX
How do I clean the filter on the Dimplex WFC3NS?
Turn off and unplug the heater. Remove the front grille (usually by pulling or unscrewing). Take out the filter, wash it with warm water and mild soap, let it dry completely, then reinstall. Do not operate without a filter.
What is the maximum room size for the WFC3NS?
The WFC3NS is suitable for rooms up to approximately 20-25 m² (depending on insulation). It provides 2000W of heating power.
Can the WFC3NS be used in a bathroom?
This model is not specifically rated for bathroom use (IP rating not provided). For safety, do not use it in wet areas unless it has a suitable IP rating. Check the manual for details.
How do I reset the thermal cut-out?
If the heater overheats, it will automatically shut off. Unplug it, let it cool for 10-15 minutes, check for obstructions, then plug it back in. The heater should reset and operate normally.
Does the WFC3NS have a fan-only mode?
Yes, the heater includes a fan-only setting (no heat) for air circulation. Select the fan symbol on the control panel or remote.
What does the 'NS' in WFC3NS stand for?
'NS' likely indicates 'Night Storage' or a specific feature set. However, without official documentation, it's best to refer to Dimplex for exact meaning.
Can I mount the heater on the ceiling?
No, the WFC3NS is designed for wall mounting only, with the provided bracket. Ceiling mounting may cause safety hazards.
The heater is not blowing hot air. What should I check?
First, ensure the thermostat is set higher than room temperature. Check that the heater is in heat mode (not fan-only). Also, verify the filter is not clogged. If the issue persists, contact Dimplex support.
Is a remote control included with the WFC3NS?
Some versions may include a remote control, but it is not standard for all models. Please check your package contents or the manual.
How do I obtain spare parts for the WFC3NS?
Contact Dimplex customer service or an authorized dealer. Common spare parts include the filter (part number may vary) and fan motor. Provide your model number for accurate identification.
User questions about WFC3NS DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WFC3NS - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WFC3NS by DIMPLEX.
USER MANUAL WFC3NS DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : WFC3NS
Category : Uncategorized