Apollo SL30 - Uncategorized GARMIN - Free user manual and instructions
Find the device manual for free Apollo SL30 GARMIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VHF Communication Transceiver for Aircraft |
| Brand | Garmin |
| Model | Apollo SL30 |
| Dimensions (H x W x D) | 2.5 x 6.25 x 8.5 inches |
| Weight | 1.2 lbs (0.54 kg) |
| Power Supply Voltage | 11 – 33 V DC |
| Frequency Range | 118.000 – 136.975 MHz |
| Number of Channels | 760 (25 kHz spacing) |
| Transmitter Power | 10 watts minimum (PEP) |
| Receiver Sensitivity | Better than 6 µV for 6 dB SINAD |
| Main Functions | Communication, frequency selection, squelch, monitor, 121.5 MHz emergency frequency |
| Interface | Front panel controls with digital display |
| Connector | BNC antenna, rear pin connectors |
| Cooling | Convection cooling, no fan |
| Operating Temperature | -20°C to +55°C |
| Storage Temperature | -55°C to +85°C |
| Maintenance | Clean exterior with a soft, dry cloth; periodic calibration per aircraft maintenance schedule |
| Safety | Designed for aircraft use only; install by certified avionics technician |
| Spare Parts & Repairability | Contact Garmin authorized service center; limited field replaceable components |
| General Information | Includes mounting tray, connector kit, and installation manual |
Frequently Asked Questions - Apollo SL30 GARMIN
What is the Garmin Apollo SL30?
The Garmin Apollo SL30 is a VHF communication transceiver designed for general aviation aircraft, providing reliable voice communication with 760 channels.
How do I install the Apollo SL30?
Installation must be performed by a certified avionics technician. The unit comes with a mounting tray and connector kit. Refer to the installation manual for wiring diagrams and specifications.
What is the frequency range of the SL30?
The SL30 operates from 118.000 to 136.975 MHz with 25 kHz channel spacing, covering all civil aviation communication frequencies.
How do I select a frequency on the SL30?
Use the inner and outer knobs on the front panel to adjust the active and standby frequencies. The standby frequency can be swapped using the flip-flop button.
What is the transmitter power output?
The SL30 transmits at a minimum of 10 watts PEP (peak envelope power) into a 50-ohm antenna load.
Can I use the SL30 in a helicopter?
Yes, the SL30 is suitable for both fixed-wing and rotary-wing aircraft, provided the installation meets the environmental and power requirements.
How do I access the 121.5 MHz emergency frequency?
Press and hold the 121.5 button on the front panel for two seconds. The unit will instantly tune to 121.5 MHz and transmit on that frequency.
What maintenance is required for the SL30?
Regular cleaning with a soft cloth is sufficient. Periodic calibration and bench testing should be performed as per the aircraft maintenance schedule.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. It contains detailed operating instructions and regulatory information.
Does the SL30 require any software updates?
The SL30 is a hardware-defined radio and does not require software updates. However, any repairs should be done by Garmin-authorized centers.
User questions about Apollo SL30 GARMIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Apollo SL30 - GARMIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Apollo SL30 by GARMIN.