Nano Bassballs - Guitar amplifier Electro Harmonix - Free user manual and instructions
Find the device manual for free Nano Bassballs Electro Harmonix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bass Envelope Filter / Auto-Wah Pedal |
| Dimensions | 4.5 x 2.75 x 2.0 inches (11.4 x 7.0 x 5.1 cm) |
| Weight | 0.5 lbs (0.23 kg) |
| Power Supply | 9V DC, 20mA (center negative) |
| Battery | 9V alkaline battery (not included) |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Controls | Low Pass, Sensitivity, Range, Volume |
| Effect Type | Dynamic envelope filter with switchable low-pass or band-pass |
| True Bypass | Yes |
| LED Indicator | On/off status |
| Input Connector | 1/4" mono jack |
| Output Connector | 1/4" mono jack |
| Housing | Die-cast zinc chassis |
| Power Consumption | 20 mA |
| Cleaning Instructions | Wipe with a dry cloth. Do not use solvents. |
| Safety Warning | Use only with specified power supply. Do not open. |
| Spare Parts Availability | Contact Electro-Harmonix for service. |
| Reparability | User-serviceable parts: battery compartment only. |
| Warranty | One year limited warranty. |
Frequently Asked Questions - Nano Bassballs Electro Harmonix
How do I power the Nano Bassballs?
Use a 9V DC power supply with center negative polarity and at least 20mA current. Alternatively, you can use a 9V alkaline battery.
What do the controls do?
Low Pass chooses between low-pass and band-pass filter. Sensitivity adjusts the trigger threshold. Range sets filter sweep width. Volume controls output level.
Is the Nano Bassballs true bypass?
Yes, it features true bypass to maintain signal integrity when the effect is off.
Can I use it with a guitar?
It is optimized for bass but can be used with guitar. The envelope filter responds to low frequencies, so results may vary.
How do I connect it to my amp?
Plug your bass into the input jack, then connect the output jack to your amplifier input using standard 1/4" instrument cables.
Why is the LED not turning on?
Check if the power supply is connected or if the battery is fresh and installed correctly. Ensure the pedal is not in bypass mode.
How do I clean the pedal?
Wipe the exterior with a soft dry cloth. Do not use any solvents or abrasive cleaners.
What type of battery does it use?
It uses a standard 9V alkaline battery. To install, remove the bottom plate and connect the battery clip.
Can I daisy-chain power with other pedals?
Yes, as long as the total current draw does not exceed your power supply's capacity. The Nano Bassballs draws 20mA.
Where can I get replacement parts?
Contact Electro-Harmonix customer service for assistance with repairs or replacement parts.
User questions about Nano Bassballs Electro Harmonix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar amplifier in PDF format for free! Find your manual Nano Bassballs - Electro Harmonix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nano Bassballs by Electro Harmonix.
USER MANUAL Nano Bassballs Electro Harmonix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electro Harmonix
Model : Nano Bassballs
Category : Guitar amplifier