PLPW1000 - Powerline Adapter NETGEAR - Free user manual and instructions
Find the device manual for free PLPW1000 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powerline Adapter |
| Model | PLPW1000 |
| Brand | Netgear |
| Data Transfer Rate | Up to 1000 Mbps |
| Ethernet Ports | 1x 10/100/1000 Gigabit Ethernet |
| Security | 128-bit AES encryption |
| Dimensions (W x D x H) | 110 x 65 x 40 mm |
| Weight | 170 g |
| Power Consumption | Typical: 5 W | Standby: 0.5 W |
| Operating Temperature | 0°C to 40°C |
| Humidity | Up to 90% non-condensing |
| LED Indicators | Power, Powerline, Ethernet |
| Pairing Button | Yes (Security button) |
| Compliance | CE, FCC, RoHS |
| Package Contents | 2x PLPW1000 adapters, 2x Ethernet cables, Quick Start Guide |
| Maintenance & Cleaning | Wipe with a dry, soft cloth. Do not use liquids or sprays. |
| Safety Precautions | Do not expose to water, heat sources, or direct sunlight. Unplug during storms. |
| Spare Parts & Repairability | No user-serviceable parts. Contact Netgear support for issues. |
Frequently Asked Questions - PLPW1000 NETGEAR
How do I set up the Netgear PLPW1000 Powerline adapter?
Plug one adapter into a wall outlet near your router and connect it via Ethernet. Plug the second adapter into an outlet in the desired room and connect your device. Press the Security button on both adapters to pair them.
What is the maximum speed of the PLPW1000?
The PLPW1000 supports up to 1000 Mbps over your home electrical wiring. Actual speeds may vary due to wiring quality and distance.
How do I reset the PLPW1000 to factory defaults?
Use a paperclip to press and hold the Reset button (located on the side) for about 10 seconds until the LEDs flash. This clears all settings.
Can I use the PLPW1000 with other Powerline brands?
The PLPW1000 uses the HomePlug AV2 standard. It may work with other HomePlug AV2 compliant adapters, but pairing is not guaranteed. For best performance, use only Netgear adapters.
Why is the Powerline LED not lit?
The Powerline LED indicates a connection between adapters. If it is off, adapters may not be paired or too far apart. Try pressing the Security button to re-pair, or move adapters closer.
Does the PLPW1000 support pass-through power?
No, the PLPW1000 does not have a pass-through outlet. It plugs directly into the wall and covers the outlet.
How many adapters can I add to my network?
You can add up to 16 PLPW1000 adapters in a single Powerline network. Each adapter must be paired via the Security button.
Can I use the PLPW1000 with a surge protector?
It is recommended to plug the adapter directly into a wall outlet. surge protectors or extension cords can reduce performance and may cause connection issues.
What do the LED indicators mean?
Power LED: Solid = on. Powerline LED: Solid = connected to another adapter. Ethernet LED: Solid = device connected, blinks = activity.
How do I update the firmware on the PLPW1000?
Firmware updates are managed via the Netgear Powerline Utility software (available on Netgear's website). Connect the adapter to a computer and run the utility to check for updates.
User questions about PLPW1000 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Powerline Adapter in PDF format for free! Find your manual PLPW1000 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLPW1000 by NETGEAR.