MOX133-12HFN8 - Air Conditioning MIDEA - Free user manual and instructions
Find the device manual for free MOX133-12HFN8 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Midea |
| Model | MOX133-12HFN8 |
| Cooling Capacity | 13000 BTU |
| Heating Capacity | None |
| Power Supply | 115 V ~ 60 Hz |
| Rated Power Input (Cooling) | 1100 W |
| Rated Current (Cooling) | 9.6 A |
| Room Area Coverage | Up to 550 sq ft |
| Airflow (High Speed) | 410 CFM |
| Noise Level (Indoor) | 56 dB(A) |
| Refrigerant | R410A |
| Dimensions (W x D x H) | 18.9 x 16.5 x 31.5 in |
| Weight | 82.5 lbs |
| Modes | Cool, Fan, Dehumidify |
| Fan Speeds | 3 |
| Thermostat Control | Yes, remote control included |
| Timer | 24-hour timer |
| Auto Restart | Yes |
| Filter Type | Washable mesh filter |
| Drainage | Gravity drain or continuous drain |
| Exhaust Hose Length | 5.9 ft |
| Window Kit Included | Yes |
| Energy Star Rated | Yes |
Frequently Asked Questions - MOX133-12HFN8 MIDEA
How do I install the MOX133-12HFN8 portable air conditioner?
Place the unit near a window. Extend the exhaust hose from the unit to the window kit. Adjust the window kit to fit your window opening. Plug in the unit and press the power button. Ensure the hose is not bent or blocked.
How often should I clean the air filter?
Clean the filter every two weeks under normal use. Remove the filter from the back of the unit, wash with mild soap and water, and let it dry completely before reinstalling.
What does the error code E1 mean?
The E1 error code indicates a refrigerant leak or temperature sensor issue. Turn off the unit and contact a qualified technician for service.
Can I use an extension cord with this air conditioner?
No, do not use an extension cord. Plug the unit directly into a grounded outlet. Using an extension cord may cause voltage drop and damage the compressor.
How do I use the continuous drain function?
In dehumidify mode, you can attach a garden hose (not included) to the drain outlet at the back of the unit. Route the hose to a floor drain or bucket. In cool mode, the unit self-evaporates water, reducing the need for manual drainage.
Why is the unit not cooling well?
Check if the air filter is dirty, if the exhaust hose is blocked or kinked, if doors and windows are open, or if the room is too large for the unit's capacity. Ensure the set temperature is lower than the room temperature.
How do I set the timer?
Press the Timer button on the remote or control panel. Use +/- to set the desired time (0-24 hours). For timer-on, set the time you want the unit to start; for timer-off, set the time to stop. Press Timer again to confirm.
Does the unit have a heating function?
No, the MOX133-12HFN8 is a cooling-only portable air conditioner. It does not provide heat. For heating, consider a heat pump or space heater.
What type of refrigerant does this unit use?
The unit uses R410A refrigerant, which is ozone-friendly. Do not attempt to service the refrigerant circuit yourself. Contact a certified technician.
How do I clean the exhaust hose?
Disconnect the hose from the unit and window kit. Rinse with warm water and mild detergent. Allow to air dry completely before reattaching. Avoid using harsh chemicals.
User questions about MOX133-12HFN8 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual MOX133-12HFN8 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOX133-12HFN8 by MIDEA.
USER MANUAL MOX133-12HFN8 MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : MOX133-12HFN8
Category : Air Conditioning