MICRO-VR - Guitar amp AMPEG - Free user manual and instructions
Find the device manual for free MICRO-VR AMPEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Guitar Amplifier Head |
| Brand | Ampeg |
| Model | MICRO-VR |
| Power Output | 200W RMS at 4 ohms |
| Channels | 2 (Clean and Overdrive) |
| Equalizer | 3-band EQ (Bass, Mid, Treble) |
| Inputs | 1 x 1/4" instrument input |
| Outputs | 1 x 1/4" speaker output (4 ohm minimum) |
| Headphone Output | 1 x 1/4" stereo headphone jack |
| Aux Input | 1 x 1/8" stereo aux input |
| Dimensions (W x H x D) | 12.2 x 7.6 x 10.2 inches (310 x 193 x 259 mm) |
| Weight | 13.5 lbs (6.1 kg) |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | 200W max |
| Cabinet Material | Steel chassis with black textured finish |
| Cooling | Internal fan, variable speed |
| Protection Features | Short circuit, thermal, and overcurrent protection |
| Front Panel Controls | Volume, Gain, Bass, Mid, Treble, Channel Select, Master Volume |
| Rear Panel Features | Speaker output, footswitch jack, effects loop send/return |
| Included Accessories | Power cord, quick start guide |
| Maintenance | Wipe with dry cloth; do not use solvents |
| Safety Certifications | CE, FCC, RoHS |
| Repairability | Contact authorized service center for repairs |
Frequently Asked Questions - MICRO-VR AMPEG
How do I connect the MICRO-VR to a speaker cabinet?
Use a 1/4" speaker cable to connect the speaker output on the rear panel to your cabinet. Ensure the cabinet impedance is 4 ohms minimum.
Can I use the headphone output with external speakers?
The headphone output is designed for private listening and disables the speaker output when a jack is inserted. To use external speakers, remove the headphone plug.
What is the maximum power output of the MICRO-VR?
The amplifier delivers 200W RMS at 4 ohms. At 8 ohms, the power is approximately 120W RMS.
Does the MICRO-VR have an effects loop?
Yes, it has a series effects loop with send and return jacks on the rear panel for connecting external pedals.
How do I switch between clean and overdrive channels?
Press the Channel Select button on the front panel. Alternatively, connect a footswitch (not included) to the rear panel footswitch jack for remote switching.
What type of power cable does the MICRO-VR use?
It uses a standard IEC C13 power cable. Ensure the voltage selector (if present) matches your local mains voltage.
Can I connect a bass guitar to the MICRO-VR?
Yes, the MICRO-VR is designed for both guitar and bass. It features a wide frequency response suitable for bass frequencies.
Why is the fan always running?
The variable speed fan runs continuously to keep the amplifier cool. It will speed up under heavy load to prevent overheating.
How do I clean the MICRO-VR?
Unplug the amplifier and wipe the exterior with a soft, dry cloth. Do not use any abrasive or solvent-based cleaners.
What should I do if the amplifier shuts off unexpectedly?
This may indicate thermal or overcurrent protection has activated. Turn off the unit, allow it to cool, and check speaker connections. If the problem persists, contact Ampeg support.
User questions about MICRO-VR AMPEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar amp in PDF format for free! Find your manual MICRO-VR - AMPEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MICRO-VR by AMPEG.
USER MANUAL MICRO-VR AMPEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMPEG
Model : MICRO-VR
Category : Guitar amp