DT164-W - Uncategorized ALLEN & HEATH - Free user manual and instructions
Find the device manual for free DT164-W ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Stage Box |
| Brand | Allen & Heath |
| Model | DT164-W |
| Input Channels | 16 (XLR, balanced) |
| Output Channels | 4 (XLR, balanced) |
| Connectivity | dSNAKE (Cat5e/6, up to 120 m) |
| Sampling Rate | 48 kHz / 96 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Dynamic Range | 110 dB (A-weighted) |
| Power Supply | PoE (IEEE 802.3af) or external 12V DC adapter |
| Dimensions (W x D x H) | 482 x 200 x 44 mm (1U) |
| Weight | 3.5 kg (7.7 lb) |
| Enclosure | Metal chassis, black painted |
| Indicators | 16 green/red LEDs for signal presence/peak |
| Mounting | 19" rack mountable (ears included) |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Included Accessories | Rack ears, screws, power supply (if non-PoE) |
Frequently Asked Questions - DT164-W ALLEN & HEATH
What is the Allen & Heath DT164-W?
The DT164-W is a digital stage box that provides 16 remote-controllable microphone/line inputs and 4 line outputs for Allen & Heath digital mixing systems. It connects via a single Cat5 cable using dSNAKE protocol.
How do I connect the DT164-W to an Allen & Heath mixer?
Connect the DT164-W to your mixer’s dSNAKE port using a shielded Cat5e or Cat6 cable. The mixer automatically detects the stage box and configures audio routing. Ensure both devices have the same firmware version.
Does the DT164-W support Power over Ethernet (PoE)?
Yes, the DT164-W is PoE compliant (IEEE 802.3af Class 0). It can be powered directly from a PoE-enabled mixer or a PoE switch. Alternatively, use the included 12V DC adapter.
Can I use the DT164-W with an Allen & Heath dLive system?
Yes, the DT164-W is fully compatible with dLive mixers via the dSNAKE port. It provides high-quality audio I/O with low latency for FOH or monitor applications.
What type of cable is required for the dSNAKE connection?
Use a shielded Cat5e or Cat6 Ethernet cable with RJ45 connectors. The maximum cable length is 120 meters (394 feet). For outdoor or permanent installations, use outdoor-rated cable.
How do I update the firmware on the DT164-W?
Firmware updates are performed via the dSNAKE connection from the mixer. Ensure the mixer is running the latest firmware, then the DT164-W will update automatically when connected. Alternatively, use Allen & Heath’s firmware update utility via a computer and a dSNAKE interface.
What do the LED indicators on the front panel mean?
Each input channel has a dual-color LED: green indicates signal presence, and red indicates peak/clipping. The power LED shows device status: solid green for normal operation, flashing for error.
Is the DT164-W rack-mountable?
Yes, it occupies 1U of rack space and includes rack ears for installation in a standard 19-inch rack. The ears can be rotated for front or rear mounting.
How should I clean and maintain the DT164-W?
Disconnect power before cleaning. Use a soft dry cloth to wipe the surface. Avoid liquids, solvents, or abrasive cleaners. Ensure ventilation slots are free from dust. Periodically check RJ45 connectors for corrosion.
Where can I find the user manual or technical support?
The user manual is available for free download on notice-facile.com or the Allen & Heath website. For technical support, contact your local Allen & Heath distributor or visit the official forum.
User questions about DT164-W ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DT164-W - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DT164-W by ALLEN & HEATH.