IP1 - Uncategorized ALLEN & HEATH - Free user manual and instructions
Find the device manual for free IP1 ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Personal Mixer / Headphone Amplifier |
| Dimensions | 130 x 85 x 40 mm (5.1 x 3.3 x 1.6 in) |
| Weight | 0.3 kg (0.66 lb) |
| Power Supply | USB bus powered or 5V DC via micro-USB |
| Inputs | 1 x XLR/TRS combo, 1 x 1/4" TRS aux input |
| Outputs | 1 x 1/4" TRS stereo headphone output |
| Headphone Impedance | Supports 16-200 ohms |
| Sample Rate | 48 kHz, 24-bit |
| Functions | Personal monitor mixing, aux input blending, volume control |
| Maintenance | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety | Keep away from liquids. Do not disassemble. Use only approved power sources. |
| Spare Parts | Not user-serviceable. Contact Allen & Heath for repairs. |
| Repairability | Repairs should be performed by qualified technicians. |
| General Information | Compact personal monitor controller for in-ear systems. Compatible with ME-1 personal mixer systems. |
Frequently Asked Questions - IP1 ALLEN & HEATH
How do I connect the IP1 to my monitoring system?
Connect the IP1 to an Allen & Heath ME-1 personal mixer via the RJ45 Ethernet port using a standard CAT5 cable. The IP1 will receive audio and control signals over the same cable.
Can I use the IP1 with other brands of personal mixers?
No, the IP1 is designed specifically for use with Allen & Heath ME-1 and compatible systems using the A-Net protocol. It will not work with other brands.
Does the IP1 require external power?
The IP1 is bus-powered via the Ethernet connection from the ME-1 mixer. No external power supply is needed for standard operation.
What headphones are recommended for the IP1?
The IP1 works with any standard stereo headphones with a 1/4'' plug. For best results, use in-ear monitors with impedance between 16 and 200 ohms.
How do I adjust the mix on the IP1?
Use the single rotary encoder on the IP1 to scroll through channels. Press the encoder to select a channel, then rotate to adjust its volume. The level is indicated by the onboard LED ring.
Can I connect a microphone directly to the IP1?
Yes, the IP1 has a combo XLR/TRS input that accepts a microphone or line-level instrument. The signal is transmitted to the ME-1 system over Ethernet.
What is the maximum number of IP1 units supported?
An ME-1 system can support up to 16 IP1 units (or other personal mixers) when using a suitable power injector. Check the ME-1 manual for exact specifications.
How do I update the firmware on the IP1?
Firmware updates are performed via the ME-1 system using the Allen & Heath Firmware Manager software. Connect the ME-1 to a computer and follow the instructions in the software.
The LED ring on my IP1 is not lighting up. What should I do?
First, check the Ethernet cable connection. If the cable is secure, try a different port on the ME-1. If the problem persists, the unit may need service. Contact Allen & Heath support.
Is the IP1 compatible with the ME-500 system?
Yes, the IP1 works with ME-500 and other Allen & Heath systems that use the A-Net protocol on a standard Ethernet network.
User questions about IP1 ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IP1 - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IP1 by ALLEN & HEATH.
USER MANUAL IP1 ALLEN & HEATH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALLEN & HEATH
Model : IP1
Category : Uncategorized