ProCurve 5406zl - Network switch HP - Free user manual and instructions
Find the device manual for free ProCurve 5406zl HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Model | ProCurve 5406zl |
| Dimensions (H x W x D) | 17.6 x 44.5 x 44.2 cm (6.9 x 17.5 x 17.4 in) |
| Weight | 16.8 kg (37.0 lb) empty chassis |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | 400 W max |
| Cooling | Internal fans, side-to-side airflow |
| Module Slots | 6 (for line modules and management module) |
| Port Density | Up to 288 Gigabit Ethernet or 48 10-Gigabit Ethernet ports |
| Management | CLI, Web GUI (HTTP/HTTPS), SNMP v1/v2c/v3 |
| Layer 2 Features | VLAN, STP, MSTP, RSTP, Link Aggregation, IGMP Snooping |
| Layer 3 Features | Static routing, RIP, OSPF, VRRP, ACLs |
| PoE+ Support | Yes, up to 144 PoE+ ports (depending on modules) |
| Security | ACLs, SSH, RADIUS, TACACS+, Port Security, DHCP Snooping |
| Jumbo Frame Support | Up to 9220 bytes |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 15% to 95% (non-condensing) |
| Maintenance | Clean with dry cloth; ensure vents are unobstructed; replace fan modules as needed |
| Spare Parts & Repairability | Field-replaceable power supplies, fan trays, and line modules; hot-swappable components |
Frequently Asked Questions - ProCurve 5406zl HP
How do I perform a factory reset on the HP ProCurve 5406zl?
Press and hold the Reset button on the front panel for at least 5 seconds while the switch is powered on. Release the button when the LED blinks. This restores factory default settings.
Can the HP ProCurve 5406zl support PoE+?
Yes, it supports PoE+ (IEEE 802.3at) when equipped with compatible PoE-enabled line modules. It can deliver up to 144 PoE+ ports depending on the configuration.
How do I configure VLANs on the ProCurve 5406zl?
Access the CLI and use commands like vlan
What is the maximum number of ports I can have on the 5406zl?
With 6 slots, you can install line modules offering up to 288 Gigabit Ethernet ports or a mix of Gigabit and 10-Gigabit ports (e.g., 48 10GbE ports using 8-port modules).
How do I upgrade the firmware on the switch?
Download the latest firmware from HP's support site. Upload it via TFTP or HTTP using the command copy tftp flash
Can I stack multiple ProCurve 5406zl switches?
Yes, the 5406zl supports HP Intelligent Resilient Framework (IRF) for stacking. Connect stacking cables to dedicated stacking modules to form a single logical switch.
Why are the link LEDs not lighting up after connecting a cable?
Check the cable type (use straight-through or crossover as needed), ensure the port is enabled, and verify that the connected device is powered on. Use show interfaces to inspect port status.
How do I secure remote access to the switch?
Enable SSH instead of Telnet. Configure ACLs to restrict management access to specific IP addresses. Use ip ssh and access-list commands in CLI.
What is the power consumption of the ProCurve 5406zl?
The typical power consumption is 400 W max for the chassis fully loaded. Actual consumption depends on installed modules and PoE load.
Can I use SFP or SFP+ modules in the 5406zl?
Yes, if you install line modules that have SFP/SFP+ cages. The chassis supports various 1GbE and 10GbE optics modules.
User questions about ProCurve 5406zl HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ProCurve 5406zl - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProCurve 5406zl by HP.
USER MANUAL ProCurve 5406zl HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProCurve 5406zl
Category : Network switch