Primergy RX2540 M2 - Server FUJITSU - Free user manual and instructions
Find the device manual for free Primergy RX2540 M2 FUJITSU in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 2U |
| Dimensions (W x D x H) | 482.6 mm x 720 mm x 86.8 mm |
| Weight (typical) | 25 kg |
| Supported Processors | Intel Xeon E5-2600 v4 Series |
| Memory | Up to 1.5 TB DDR4 ECC, 24 DIMM slots |
| Storage Bays | Up to 24 x 2.5" SATA/SAS/SSD hot-plug |
| Power Supply | Dual hot-plug 800W or 1,200W, 80+ Platinum |
| Cooling | Redundant hot-plug fans |
| RAID Support | Hardware RAID 0/1/10/5/6, optional cache |
| Network | 4x 1GbE, optional 10GbE |
| Management | iRMC S5 with IPMI 2.0 |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Cleaning Instructions | Use compressed air for dust removal. Avoid liquids. |
| Safety Precautions | Use anti-static wrist strap. Disconnect power before servicing. |
| Spare Parts & Repairability | Hot-swappable PSU, fans, drives; replaceable memory, CPU, RAID controller. |
| Certifications | CE, FCC, RoHS |
| Warranty | 3 years parts and labor (extendable) |
Frequently Asked Questions - Primergy RX2540 M2 FUJITSU
How do I replace a hard drive in the FUJITSU Primergy RX2540 M2?
The server supports hot-swap drives. Press the release button on the drive carrier, pull the lever to remove the drive, insert a new drive, and push the lever to lock. The drive will be automatically detected.
What processors are compatible with the Primergy RX2540 M2?
It supports Intel Xeon E5-2600 v4 processors. Use the CPU compatibility list from Fujitsu for specific models.
How to reset the iRMC management module?
Press and hold the iRMC reset button on the front panel for 5 seconds. Alternatively, use the iRMC web interface to perform a reset.
What is the maximum memory capacity?
The server supports up to 1.5 TB of DDR4 ECC memory across 24 DIMM slots.
Can I install a 10GbE network card?
Yes, the server has PCIe slots for add-on cards. Fujitsu offers optional 10GbE adapters. Ensure compatible drivers are installed.
How to clean the server?
Power off and disconnect all cables. Use compressed air to blow dust from vents and components. Avoid using liquids or vacuum cleaners.
What safety precautions should I take before servicing?
Always wear an anti-static wrist strap. Turn off the server and unplug power cords. Wait for components to cool down.
How can I update the BIOS?
Download the latest BIOS from Fujitsu support. Use the iRMC web interface or bootable USB drive to apply the update. Do not power off during update.
What RAID levels are supported?
The onboard RAID controller supports RAID 0, 1, 10, 5, and 6. Optional cache modules provide enhanced performance.
Are spare parts available for the Primergy RX2540 M2?
Yes, Fujitsu provides spare parts such as power supplies, fans, drives, memory, and RAID controllers. Contact Fujitsu or authorized resellers.
User questions about Primergy RX2540 M2 FUJITSU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Primergy RX2540 M2 - FUJITSU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Primergy RX2540 M2 by FUJITSU.
USER MANUAL Primergy RX2540 M2 FUJITSU
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FUJITSU
Model : Primergy RX2540 M2
Category : Server