LCD5500 - Surveillance Camera LG - Free user manual and instructions

Product Type	Surveillance Camera
Brand	LG
Model	LCD5500
Resolution	5 MP (2592 x 1944)
Lens	Fixed 3.6mm, F2.0
Night Vision	Up to 30m with IR LEDs
Field of View	90° (horizontal)
Video Compression	H.265+ / H.265 / H.264
Frame Rate	20 fps @ 5MP
Day/Night Function	ICR, Auto Switching
Motion Detection	Yes, configurable zones
Audio	Built-in microphone
Storage	MicroSD card (up to 128GB) / NVR
Network	Ethernet RJ45, Wi-Fi 802.11 b/g/n
Power Supply	12V DC, 1A (adapter included)
Power Consumption	≤ 7W
Dimensions (W x H x D)	7.2 x 6.5 x 11.8 cm (without bracket)
Weight	0.5 kg (net)
Operating Temperature	-30°C to 60°C
Protection Rating	IP67 (weatherproof)
Mounting	Wall or ceiling bracket included
Compatibility	LG SmartCam app, ONVIF
Accessories Included	Mounting kit, screws, power adapter
Maintenance	Clean lens with soft cloth; avoid moisture
Safety	Do not expose to extreme conditions; use certified adapter
Repairability	Contact LG service center for spare parts

Frequently Asked Questions - LCD5500 LG

How do I install the LG LCD5500 surveillance camera?

Mount the camera using the included bracket, connect the Ethernet cable (or Wi-Fi), and power it with the 12V adapter. Then use the LG SmartCam app to configure the camera.

Does the camera support night vision?

Yes, it features IR LEDs with a range of up to 30 meters, and automatically switches to black-and-white mode in low light.

Can I view the camera feed remotely?

Yes, through the LG SmartCam app on iOS and Android, or via web browser with port forwarding.

What is the maximum resolution of the LCD5500?

The camera records at 5 MP (2592x1944) at 20 fps, but you can lower the resolution for faster frame rates.

Does the camera support audio?

It has a built-in microphone for capturing sound, but no speaker for two-way audio.

How do I reset the camera to factory settings?

Press and hold the reset button on the camera for 10 seconds until the LED flashes rapidly.

What storage options are available?

You can insert a microSD card (up to 128GB) for local recording, or connect to an NVR via Ethernet.

Is the LG LCD5500 weatherproof?

Yes, it has an IP67 rating, making it suitable for outdoor use in rain or dust.

How do I update the camera firmware?

Open the LG SmartCam app, go to Settings > Firmware Update, and follow the prompts to install the latest version.

Can I connect the camera wirelessly?

Yes, it supports Wi-Fi 802.11 b/g/n. Use the app to connect it to your home network without an Ethernet cable.

USER MANUAL LCD5500 LG

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

LCD5500-BN

LCD5500-BP

MFL67409450

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

- A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.

• Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

Warning: The product has been dropped or the case is

broken, turn off the power and unplug the power cord. (This may cause fire, electric shock, or injury.)

Warning: If the product has no video out or sound, please stop using. Unplug the power cable immediately and contact the service center. (This may cause fire or electric shock.)

Caution: This installation should be made by a qualified service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Prevent the power cable from being severely bent or having pressure exerted on it by a heavy object.

To disconnect power from mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

EEE Compliance with Directive. (for Turkey only)

LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC and 2011/65/EU.

Contact office for compliance of this product:

LG Electronics Inc. EU Representative, Krijgsman 1,1186 DM Amstelveen, The Netherlands

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

1. Only use attachments/accessories specified by the manufacturer.
2. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

1. Unplug this apparatus during lightning storms or when unused for long periods of time.
2. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Cautions for Safe Operation

Power Supply

This camera must always be operated DC 12 V or AC 24 V. Certified/Listed Adaptor which comply with LPS.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock.

• Remove dust or dirt on the surface of the lens with a blower.
• Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.
• Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface finish and/or impair the operation of the camera.

Operating and storage location

Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations.

• Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)
• Damp or dust place
• Places exposed to rain
• Places subject to strong vibration
• Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.

Contents

Features......8

Accessories......8

Part Names and Functions 9

Connections 11

Basic connection....11

Installation....12

Mounting the Camera....12

Image Adjustment ....14

Menu Operation.... 18

OSD Menu control buttons....18

OSD Menu Overview....19

General Operation....21

Exposure Settings....22

White Balance settings 26

Day & Night Setting 27

Motion Detection Setting....28

3D-DNR Setting....29

Privacy Mask Setting 29

Special Menu Settings 31

SYSTEM Setting 35

Specification 36

Features

This Color Video Camera is designed for installation in a video surveillance system.

This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system.

Should you require any technical assistance, please contact authorized service center.

• High resolution and high sensitivity with a 6 mm (1/3 Type) Exview Super HAD CCD II.
• Automatically switch between DC 12 V and AC 24 V.
• Smart motion detector.
• Wide Dynamic Range (WDR)

Accessories

Installation sticker
Fixing screws

Part Names and Functions

1 Dome Cover
2 Lens Cover
3 Focus lock lever

Fixes the focus position after adjusting.

4 Zoom lock lever

Fixes the zoom position after adjusting.

5 Rotate adjuster
6 Lock button

You can lock the camera mounting bracket by using the lock button.

7 Tilting lock screw

Fixes the tilting position after adjusting.

8 Setup menu control buttons
9 Video Out connector

Use this jack for checking the picture with portable monitor when install the camera.

Part Names and Functions

10 Pan adjuster

Adjusts the pan position.

11 Power input connector

Supplies AC 24 V or DC 12 V from an external power source.

12 Video output connector (BNC type)

13 Camera mounting bracket

This bracket is supplied for ceiling installation.

Connections

Basic connection

The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied.

1. Make the video signal connection between the camera and the monitor or DVR.

1. Connect a external power source to the power input jack of the camera. (recommended power adapter is AC 24 V/0.5 A, DC 12 V/0.5 A or above)

Installation

Mounting the Camera

Follow the instructions below to surface mount the camera with supplied camera mounting bracket.

1. Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. Using the template as a guide, make a hole through the ceiling.

1. Pass the connection cable through the inner side of the ceiling.

Installation

1. Install the camera mounting bracket to the ceiling.

1. Connect the cables to the cable jacks of the camera body.

Installation

1. Assemble the camera and mounting bracket after align the front part of the camera and mounting bracket. Connect the unit by following step 1 and 2.

Image Adjustment

You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor.

Notes:

- Do not hold the camera by lens unit to adjust panning, tilting, or azimuth.

- The video output to the BNC will be interrupted while a portable monitor is connected to the video jack.

1. Disassemble the Dome Cover from the main body by turning it counterclockwise and detach the Lens -cover.

Installation

1. Connect a portable monitor to the video jack.

1. Adjust the pan/tilt/rotate position of the camera.

Installation

1. Adjust the zoom.

4-1. Unlock the zoom lever.
4-2. Move the lever to adjust the zoom.
4-3. Lock the lever.

1. Adjust the focus.

5-1. Unlock the focus lever.
5-2. Move the lever to adjust the focus.
5-3. Lock the lever.

Installation

1. This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. After then attach the lens cover and dome cover.

Menu Operation

OSD Menu control buttons

This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons.

- UP button:

Used to move upper direction on the menu screen. Use this button to select an item or adjust the parameters.

- DOWN button:

Used to move lower direction on the menu screen. Use this button to select an item or adjust the parameters.

• RIGHT button:

Moves the cursor to the right. Used to increment the value selected in the menu. The parameter changes each time this button is pressed.

- LEFT button:

Moves the cursor to the left. Used to decrement the value selected in the menu. The parameter changes each time this button is pressed.

- SET button:

Executes selections and displays a submenu for an item with the 📁mark.

Menu Operation

OSD Menu Overview

The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus.

Main Menu	Sub Menu Contents
EXPOSURE ALC /ELC		BACKLIGHT OFF/WDR/BLC/HSBLC
		BRIGHTNESS 0 to 100
		AGC	OFF/LOW/MIDDLE/HIGH
		SHUTTER	1/120 000, ..., 1/160,A.FLK, OFF, AUTO, x2,..., x512
		SENS-UP	OFF
			AUTO
		EXIT TOP/RET/END
WHITE BAL	ATW -
	AUTO -
	AWC → SET KEY	-
	MANUAL	RED -100 to	100
		BLUE -100 to	100
		EXIT TOP/RET/END

Main Menu	Sub Menu Contents
DAY/NIGHT	AUTO	BURST ON/OFF
		LEVEL LOW/ MIDDLE/ HIGH / USER
		DWELL TIME	3 SEC to 60 SEC
		EXIT TOP/RET/END
	DAY -
	NIGHT	BURST ON/OFF
		EXIT TOP/RET/END
MOTION DET	OFF
	ON	AREA SETUP	AREA SELECTION	1 to 8
			STATE ON /	OFF
			POSITION ←→	0 to 7
			POSITION ↑↓	0 to 5
			SIZE ←→	1 to 8
			SIZE ←→	1 to 6
			EXIT	TOP/RET/ END
		SENSITIVITY	0 to 100
		DISPLAY	OUTLINE,MASK1,MASK2,OFF
		ALRAM OUT	MESSAGE,OFF
		EXIT TOP/RET/END

Menu Operation

Main Menu	Sub Menu	Contents
3D-DNR 0 to 100
PRIVACY MASK	OFF -
	ON	RECTANGLE	MASK SELECTION	1 to 8
			DISPLAY	OFF,MOZAIC,COLOR1 to COLOR 8
			POSITION ←→	2 to 98
			POSITION ↑↓ 2	to 98
			SIZE ←→ 4 to 100
			SIZE ←→ 4 to 100
			EXIT TOP/RET/END
		CIRCLE	MASK SELECTION	1 to 4
			DISPLAY	OFF,MOZAIC,COLOR1 to COLOR8
			POSITION ←→	0 to 100
			POSITION ↑↓ 0	to 100
			SIZE ←→ 1 to 15
			SIZE ←→ 1 to 15
			RADIOUS 1 to 100
			EXIT TOP/RET/END

Main Menu	Sub Menu	Contents
PRIVACY MASK	ON	POLYGON	MASK SELECTION	1 to 2
			DISPLAY	OFF,MOZAIC,COLOR1 to COLOR 8
			SHAPE -
			POSITION -
			EXIT TOP/RET/END
		EXIT TOP/RET/END
SPECIAL	D-ZOOM	OFF -
		ON	ZOOM x1.0 to x16.0
			PAN-100 to 100
			TILT	-100 to 100
			EXIT TOP/RET/END
	D-EFFECT	OFF / MIRROR / ROTATE / V-FILP
	SHARPNESS	0 to 100
	COLOR	0 to 100
	SYNC	INT / LL
	USER TITLE	ON / OFF
	LANGUAGE	ENG/CHN/KOR/JAP/FRE/ITA/ESP/POR/DUT/GER/POL/RUS/TUR/ARA/HEB
	EXIT	TOP/RET/END

Menu Operation

Main Menu	Sub Menu	Contents
SYSTEM	FACTORY RESET	-
	EXIT	TOP/RET/END
EXIT

General Operation

1. Press [SET] button.

[CAMERA SETTING] menu appears on the monitor.

1. Use [UP] or [DOWN] button to select an option then press [SET] button.
   Submenu appears on the monitor.
2. Use [UP] or [DOWN] button to select a submenu option.
3. Use [LEFT] or [RIGHT] button to select a value.
4. Select [EXIT] option then press [SET] to exit the setup menu. In the submenu, use [UP] or [DOWN] button to select the [RET] then press [SET] to return to the

Menu Operation

previous setup menu.

• RET: Return to the previous.
• TOP: Return to the CAMERA SETTING menu screen.
• END: Exit the setup menu.

Exposure Settings

You can set the exposure options using the EXPOSURE menu.

1. Select [EXPOSURE] option on the [CAMERA SETTING] menu.
2. Use [LEFT] or [RIGHT] button to select a mode.
3. Press [SET] button and the [EXPOSURE] menu appears.

Backlight setting

Use Backlight option to view the object clearly in backlight conditions.

1. Select [Backlight] option.
2. Use [LEFT] or [RIGHT] button to select a mode then press [SET].
3. WDR: WDR (Wide dynamic range) feature can be very helpful to cope with very challenging lighting conditions. It is capable of capturing both of the dark part and bright part and combining the differences into a scene to generate a highly realistic image as original scene. Set the WDR limit.

Menu Operation

ACE (Adaptive Contrast Enhancement): This function is used when you want to display dark areas of WDR brightly.

• BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas. Set the BLC limit.
• HSBLC: Use for masking brightness of the specific area to view the subject more clearly. The HSBLC mode is automatically activated regardless of Day and Night mode.

AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a [ON] or [OFF]. Press [SET] to exit the Area setting menu.
GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale.
USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level.
MASK: Use [LEFT] or [RIGHT] button to select [ON] or [OFF].

If you set the [MASK] to [ON], the mask function is activate only when the [HSBLC]

is automatically activated in low luminance scene.

• OFF: Not used.

BRIGHTNESS setting

You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the image gets bright.

1. Select [BRIGHTNESS] option.
2. Use [LEFT] or [RIGHT] button to set the bright level.

Menu Operation

AGC (Automatic Gain Control) setting

If the images are too dark, change the maximum [AGC] value to make the images brighter. But noise is increase.

1. Select [AGC] option.
2. Use [LEFT] or [RIGHT] button to select a mode.

SHUTTER (Shutter Speed) setting

Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker.

1. Select [SHUTTER] option.
2. Use [LEFT] or [RIGHT] button to set shutter speed.

• AUTO: Adjust the [LOW LIMIT] and [HIGH LIMIT].

LOW LIMIT: Use [LEFT] or [RIGHT] button to set the [LOW LIMIT].
HIGH LIMIT: Use [LEFT] or [RIGHT] button to set the [HIGH LIMIT].

Menu Operation

Notes:

• When the SHUTTER is set to AUTO, the picture may become unstable if the camera faces a bright fluorescent light directly. Therefore, take care when installing.
• Set the Shutter OFF when Color Rolling occurs in the indoor scene. Recommend the Shutter Auto in the outdoor scene.
• If you set to one of the SHUTTER options except AUTO and A.FLK on the [SHUTTER] menu, the [BACKLIGHT - WDR] setting is not available and [---] mark is displayed.
• If you set BACKLIGHT mode to WDR, sub menu [SHUTTER LIMIT] of [SHUTTER AUTO] will be blocked and shutter will be fixed. (LCD5500-BN : 1/60, LCD5500-BP : 1/50)

SENS-UP setting

If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture.

1. Use [UP] or [DOWN] button to select [SENS-UP] option.
2. Use [LEFT] or [RIGHT] button to select mode.

• AUTO: Adjust the sensitivity of the picture automatically.

SENS-UP LIMIT: Use [LEFT] or [RIGHT] button to set the SENS-UP limit.

• OFF: Not used.

Menu Operation

Note:

If you set to one of the [SHUTTER] options except [AUTO] and [OFF] on the [SHUTTER] menu, the [SENS-UP] setting is not available and [---] mark is displayed.

White Balance settings

Select the method by which the camera shifts its output colors to compensate for the color of a light source.

1. Select [WHITE BAL] option.
2. Use [LEFT] or [RIGHT] button to select a mode then press [SET].

- ATW (Auto-Tracing White Balance): Use [LEFT] or [RIGHT] button to select the ATW.

• AUTO : Use [LEFT] or [RIGHT] button to select the [AUTO].
• AWC→SET KEY: If you select the [AWC→SET KEY] mode, you will be able to set up the White Balance automatically.
• MANUAL: You can set the white balance options manually. Push the [AWC→SET KEY] mode, and then adjust White Balance. You can set the RED and BLUE in the [MANUAL] mode.

RED: Obtains the optimum amount of red gain.

BLUE: Obtains the optimum amount of blue gain.

Menu Operation

Day & Night Setting

1. Select [DAY/NIGHT] option.
2. Use [LEFT] or [RIGHT] button to select mode for Day/Night function.

- AUTO: You will be able to change the Day/Night mode automatically.

Note:

If you set the AGC to [OFF] on the [EXPOSURE] menu, the AUTO mode of the DAY/NIGHT function is not available and [---] mark is displayed.

BURST: Use [LEFT] or [RIGHT] button to select [ON] or [OFF].
LEVEL: Use [LEFT] or [RIGHT] button to select a level.
DWELL TIME: Use [LEFT] or [RIGHT] button to select a dwell time.

• DAY: Color mode enabled.
• NIGHT: Black-and-white mode enabled.

BURST: Use [LEFT] or [RIGHT] button to select [ON] or [OFF].

Note:

Select the BURST [ON] or [OFF] when the color noise occurs on the screen in NIGHT Mode after operating the Line-Lock.

Menu Operation

Motion Detection Setting

The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection to 8 zone.

1. Select [MOTION DET] option.
2. Use [LEFT] or [RIGHT] button to select a [ON] and press [SET]. The [MOTION DETECTION] menu appears.

3. Select [AREA SETUP] option.

4. Use [LEFT] or [RIGHT] button to select a area on the [AREA SELECTION].

5. Use [LEFT] or [RIGHT] button to set up the [ON] or [OFF] on the [STATE].

6. Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option.

   POSITION ←→: Moves horizontal position of the mask.
   POSITION ↑↓: Moves vertical position of the mask.
   SIZE ←→ : Enlarge or decrease the horizontal size of the mask.
   SIZE ↑↓ : Enlarge or decrease the vertical size of the mask.

7. Use [SENSITIVITY] option to obtain the optimum detection level.

8. Use [LEFT] or [RIGHT] button to select the [DISPLAY] option.
9. Use [LEFT] or [RIGHT] button to select the [ALARM OUT] option.

Menu Operation

3D-DNR Setting

1. Select [3D-DNR] option.
   If pictures are not clear due to brightness, this option would reduce the noise of picture.
2. Use [LEFT] or [RIGHT] button to select a value.

Privacy Mask Setting

This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 14 zones can be registered.

1. Select [PRIVACY] option.
2. Use [LEFT] or [RIGHT] button to select a [ON] and press [SET]. The PRIVACY SETUP menu appears.
3. RECTANGLE:

   Use [LEFT] or [RIGHT] button to select a mask on the [MASK SELECTION].
   Use [LEFT] or [RIGHT] button to set up the OFF, MOSAIC, COLOR 1 to COLOR 8 on the

Menu Operation

[DISPLAY] option.

Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option.

• POSITION←→: Moves horizontal position of the mask.
• POSITION ↑↓: Moves vertical position of the mask.
• SIZE ←→: Enlarge or decrease the horizontal size of the mask.
• SIZE ↑↓: Enlarge or decrease the vertical size of the mask.

CIRCLE:

Use [LEFT] or [RIGHT] button to select a mask on the [MASK SELECTION].
Use [LEFT] or [RIGHT] button to set up the OFF, MOSAIC, COLOR 1 to COLOR 8 on the [DISPLAY] option.
Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option.

- POSITION ←→: Moves horizontal

position of the mask.

• POSITION ↑↓: Moves vertical position of the mask.
• SIZE ←→: Enlarge or decrease the horizontal size of the mask.
• SIZE ↑↓: Enlarge or decrease the vertical size of the mask.
• RADIUS SIZE : You can adjust the RADIUS SIZE (1 to 100).

- POLYGON :

Use [LEFT] or [RIGHT] button to select a mask on the [MASK SELECTION].
Use [LEFT] or [RIGHT] button to set up the OFF, MOSAIC, COLOR 1 to COLOR 8 on the [DISPLAY] option.
Use the [LEFT], [RIGHT], [UP], [DOWN], [SET] button to draw the polygon on the [SHAPE].
Use the [LEFT], [RIGHT], [UP], [DOWN], [SET] button to move the polygon on the [POSITION].

Menu Operation

Notes:

• You can adjust the mask color manually except for COLOR 8.
• RED, GREEN, BLUE and TRANSPARENCY adjustments are applied in common from COLOR 1 to COLOR 7, after mask setting.

Special Menu Settings

This menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the [SPECIAL] menu.

1. Select [SPECIAL] option.
2. Press [SET] button and the [SPECIAL] menu appears.

Menu Operation

D-ZOOM (Digital Zoom) Setting

You can select the digital zoom level.

1. Select [D-ZOOM] option on the [SPECIAL] menu.
2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET] the DIGITAL ZOOM menu appears. When you set to ON, the displayed image can be shaking.

3. Use [UP] or [DOWN] to select a option then use [LEFT] or [RIGHT] button to select a level.

4. ZOOM: Use [LEFT] or [RIGHT] button to enlarge the screen.
   • PAN: Use [LEFT] or [RIGHT] button to move the screen.

- TILT: Use [LEFT] or [RIGHT] button to move the screen.

Note:

If you set the [D-ZOOM] to [ON], the ZOOM level is set to [x1.0] automatically.

D-EFFECT (Digital effect) Setting

You can select the digital effect.

1. Select [D-EFFECT] option on the [SPECIAL] menu.
2. Use [LEFT] or [RIGHT] button to select a digital effect.

• MIRROR: Turn on the mirror effect.
• ROTATE: Rotate the picture. (180°)

Menu Operation

• V-FLIP: Flip the picture vertically.

• OFF: Turn off the digital effect.

SHARPNESS Setting

The degree to which the boundary of the two portions is clearly distinguished.

1. Select [SHARPNESS] option on the [SPECIAL] menu.
2. Use [LEFT] or [RIGHT] button to change a adjust the option. If you set the sharpness value to higher, the image outline becomes sharp. If you set to lower value, the image outline becomes dim.

COLOR Setting

You can switch the displayed picture to gray scale or color.

1. Select [COLOR] option on the [SPECIAL] menu.
2. Use [LEFT] or [RIGHT] button to change a adjust the option.

Menu Operation

SYNC Setting

1. Select [SYNC] option on the [SPECIAL] menu.

2. The [SYNC] option is set to [INT] automatically.

Note:

AC24 V Adaptor have to use for the [LL] mode setting.

USER TITLE Setting

You can use the camera identification to assign a number and character to the camera. To disappear the user title, select [OFF].

1. Select [USER TITLE] option on the [SPECIAL] menu.

2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET]. The USER TITLE menu appears.

1. Use [UP], [DOWN], [LEFT] or [RIGHT] button to select a character or number then press [SET] button.

• CLR: Clear all entered characters and numbers.
• POS: Move the USER TITLE position on the screen using the arrow buttons.
• END: Confirm your selection or exit the setting
• 1 (Blank): Inserts a space at the cursor position.

Menu Operation

• Moves cursor to left or right.

LANGUAGE Setting

Select the viewer language for the camera setup menu and OSD information display.

1. Select [LANGUAGE] option on the [SPECIAL] screen.
2. Press [LEFT] or [RIGHT] button to select a language.

SYSTEM Setting

1. Select the [SYSTEM] menu.
2. Press [SET] button and the [SYSTEM] menu appears.
3. Use [UP] or [DOWN] button to select the option.

- FACTORY RESET: To reset the camera setting to factory setting, select the [FACTORY RESET] option.

1. Press [SET] button to confirm your selection.

Note:

The menu screen is move to top menu, after set up [FACTORY RESET].

Specification

Item LCD5500-BN LCD5500-BP
Signal System NTSC PAL
Total/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 Pixels
Image Device 6 mm (1/3) Type) Exview Super HAD CCD II
DSP XDI-V
Lens 2.8 mm to 11 mm Vari-focal Lens, F1.2
Digital Zoom x16
IRIS Control DC
Sync. System Internal / Line Lock
Scanning Frequency (H/V) 15.734 KHz / 59.94 Hz 15.625 KHz / 50 Hz
Horizontal Resolution		650 TV Lines (Color), 700 TV Lines (B/W)
S/N Ratio		50 dB
Minimum Illumination (30 IRE, F1.2)	Color	0.2 lx (Sens-up Off), 0.00 3 lx (Sens-up Auto), 0.000 1 lx (Sens-up X512)
	B/W	0.02 lx (Sens-up Off), 0.000 3 lx (Sens-up Auto), 0.000 01 lx (Sens-up X512)
Video Output Signal		1 Vp-p Composite (75 Ω)
Day & Night		ICR (AUTO / DAY / NIGHT)
BACKLIGHT		OFF / WDR / BLC / HSBLC

Specification

Item LCD5500-BN LCD5500-BP
DNR 2D + 3D-DNR
Electronic Shutter Speed 1/60 to 1/120 000 1/50 to 1/120 000
White Balance ATW / AUTO / AWC→SET KEY / MANUAL
Motion Detection 8 Zones
Privacy Zone Masking 14 Masks
Digital Effect OFF / MIRROR / ROTATE / V-FILP
Communication Coaxial Communication
Power Source DC 12 V / AC 24 V
Power Consumption 190 mA
Operation Temperature/Humidity	-10 °C to 50 °C / 0 % RH to 80 % RH
Storage Temperature/Humidity -20 °C to 60 °C / 0 % RH to 90 % RH
Dimension (∅ x H) 140 mm x 96 mm
Weight	395 g

LG

Life's Good