Veriton ES2735G - Desktop computer ACER - Free user manual and instructions

Product Type	Desktop Computer
Brand	Acer
Model	Veriton ES2735G
Form Factor	Small Form Factor (SFF)
Dimensions (W x D x H)	Approx. 3.9 x 10.2 x 11.8 in (100 x 260 x 300 mm)
Weight	Approx. 8.6 lbs (3.9 kg)
Power Supply	65 W or 90 W external power adapter
Processor	Intel Core i3/i5/i7 (likely 8th or 9th Gen)
RAM	Up to 32 GB DDR4
Storage	1 x 2.5" SATA + 1 x M.2 SSD slot
Operating System	Windows 10 Pro (pre-installed)
Ports	4x USB 3.1 Gen 1, 2x USB 2.0, 1x HDMI, 1x VGA, 1x RJ-45, audio jacks
Expansion Slots	1x PCIe x16, 1x PCIe x1
Primary Function	Business desktop for office productivity, multitasking, and light graphics
Maintenance & Cleaning	Periodically dust interior; use compressed air for vents; clean exterior with soft dry cloth
Safety	Complies with ENERGY STAR, FCC, CE; use in well-ventilated area
Spare Parts & Repairability	RAM, storage, and wireless card are user-replaceable; CPU and motherboard require professional service
Warranty	Typically 1-3 years limited warranty (varies by region)

Frequently Asked Questions - Veriton ES2735G ACER

How do I connect multiple monitors to the Veriton ES2735G?

The system has one HDMI and one VGA port. You can connect two monitors simultaneously using these ports. For additional monitors, you may need a USB-to-HDMI adapter or a graphics card installed in the PCIe slot.

Can I upgrade the RAM in this desktop?

Yes, the Veriton ES2735G supports up to 32 GB DDR4 RAM. It has two SO-DIMM slots accessible after removing the side panel. Ensure you use compatible DDR4 memory modules.

How do I open the case for maintenance?

Turn off the system and unplug all cables. Loosen the thumbscrew on the back of the case, then slide the side panel toward the rear and lift it off. Refer to the manual for detailed instructions.

What type of storage drives does it support?

It supports one 2.5-inch SATA HDD/SSD and one M.2 2280 SATA/PCIe SSD. The M.2 slot is located on the motherboard.

Why is the system not turning on?

First, check that the power cord is securely connected to the system and the wall outlet. Ensure the power supply switch (if present) is turned on. If using a surge protector, verify it is working. If the issue persists, try a different outlet.

How can I reset the BIOS password?

Clearing the CMOS will reset BIOS settings, including passwords. Open the case, locate the CMOS jumper (labeled CLR_CMOS or similar), move the jumper from pins 1-2 to 2-3 for 10 seconds, then return it. Alternatively, remove the coin-cell battery for 30 seconds.

Is the processor upgradeable?

The processor is socketed (LGA1151) and can be replaced, but it requires disassembling the cooling solution and professional care. Check the supported CPU list in the manual. Upgrading may void warranty.

How do I clean the internal components?

Use compressed air to blow dust from fans, heat sinks, and vents. Do not use water or cleaning solvents. Clean the exterior with a soft, dry cloth. Ensure the system is unplugged before cleaning.

What are the audio output options?

The front panel has a headphone jack and a microphone jack. The rear panel has audio line-out, line-in, and mic jacks. For digital audio, use HDMI or DisplayPort (if available) with audio capability.

Where can I download the latest drivers?

Visit the Acer Support website (support.acer.com), search for 'Veriton ES2735G', and select your operating system. Download drivers under the 'Drivers and Manuals' section. Alternatively, use Acer Care Center or Windows Update.

USER MANUAL Veriton ES2735G ACER

Use on aircraft.... 21

The wireless adapter and your health..... 21

USA — FCC and FAA 21

FCC radio frequency interference requirements.... 22

Canada — Industry Canada (IC) 24

European Union.... 24

www.acer-group.com/public/Sustainability

ENERGY STAR

ENERGY STAR

Environmental Protection Agency) Acer

FCC and FAA regulations may prohibit airborne operation of radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Ask the cabin crew before turning on your device's wireless adapter whilst on board.

The wireless adapter and your health

The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

• Using the wireless adapter on board airplanes, or
• Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful.

If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on.

USA — FCC and FAA

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter

meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC's recommended limits.

• The following safety precautions should be observed: Do not touch or move antenna while the unit is transmitting or receiving.
• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio.
• The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments.
• The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA).
• The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.

FCC radio frequency interference requirements

Note

Applies to device supporting IEEE 802.11a/ac wireless adapters.

This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules.

USA — Federal Communications Commission (FCC)

Note

The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.

This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference that may cause undesired operation. • 15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.

Interference statement

This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

- Reorient or relocate the receiving antenna of the equipment experiencing the interference.

• Increase the distance between the wireless adapter and the equipment experiencing the interference.
• Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canada — Industry Canada (IC)

This device complies with RSS247 of Industry Canada. This device complies with RSS247 of Industry Canada.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

European Union

List of applicable countries

This product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see

https://europa.eu/european-union/about-eu/countries_en for the latest country list.

The use of this equipment is regulated by:

1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use.

2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services.

Pakistan Telecommunication Authority (PTA) Approved.

Morocco

The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza.

The operation of this product in the radio channels 4, 5, 6 and 7 (2425 - 2442 MHz) is not authorized in the following cities: Aéroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès, Lakbab, Marrakech, Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan, Taounate, Tit Mellil, Zag.

Japan

5 GHz band is for indoor use only.

Korea