HC90PCB1 - Fan Fisher & Paykel - Free user manual and instructions
Find the device manual for free HC90PCB1 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pedestal Fan |
| Model | HC90PCB1 |
| Brand | Fisher & Paykel |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 60 W |
| Speed Settings | 3 speeds (Low, Medium, High) |
| Oscillation | 90° horizontal oscillation |
| Timer | 0-7 hours |
| Remote Control | Yes, included |
| Fan Diameter | 40 cm (16 inches) |
| Height Adjustment | 120-150 cm |
| Net Weight | 5.2 kg |
| Material | ABS plastic blades, metal pole and base |
| Noise Level | ≤ 55 dB (on high speed) |
| Airflow | 70 m³/min (max) |
| Safety Features | Stable base, safety grille, tip-over switch |
| Cleaning | Wipe with a damp cloth; do not immerse in water |
| Repairability | Replaceable motor, blades, and fuse |
| Warranty | 2 years |
Frequently Asked Questions - HC90PCB1 Fisher & Paykel
How do I clean the fan?
Turn off and unplug the fan. Use a damp cloth to wipe the blades, grille, and pole. Do not use abrasive cleaners or immerse in water. Ensure everything is dry before reassembling.
How to set the timer?
Press the Timer button repeatedly to select 1-7 hours. The fan will automatically turn off after the set time. An indicator light shows the timer is active.
Why is the fan making noise?
Check if the blades are properly attached and not bent. Ensure the grille is tight. A loose screw can cause rattling. If noise persists, contact Fisher & Paykel support.
How to use the remote control?
Insert 2 AAA batteries (not included) into the remote. Point it at the receiver on the fan base. The remote controls power, speed, oscillation, and timer.
What is the maximum height?
The fan height is adjustable from 120 cm to 150 cm. Loosen the locking ring, slide the pole to the desired height, and tighten the ring securely.
Does the fan have a warranty?
Yes, the Fisher & Paykel HC90PCB1 comes with a 2-year manufacturer warranty against defects. Retain your purchase receipt for service.
How to replace the fuse?
Unplug the fan. Open the fuse compartment on the plug or base. Replace the blown fuse with one of the same rating (e.g., 5A/250V). Close and secure the compartment.
Can the fan be used outdoors?
No, this fan is designed for indoor use only. It should not be exposed to rain, moisture, or direct sunlight to avoid electrical hazards.
How to assemble the fan?
Attach the base to the pole, then slide the fan head onto the top. Secure with screws provided. Insert the grille, align tabs, and lock. Refer to the manual for diagrams.
What is the power consumption?
The fan consumes up to 60 watts on high speed. It is energy-efficient and cost-effective for continuous use.
User questions about HC90PCB1 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual HC90PCB1 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC90PCB1 by Fisher & Paykel.