OM 6210-90 T/1 - Dishwasher GRAM - Free user manual and instructions
Find the device manual for free OM 6210-90 T/1 GRAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Gram |
| Model | OM 6210-90 T/1 |
| Installation Type | Fully integrable |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Net Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 262 kWh |
| Water Consumption per Cycle | 12 L |
| Number of Place Settings | 14 |
| Number of Programs | 6 |
| Programs | Eco 50°C, Auto 45-65°C, Intensive 70°C, Quick 30min, Glass 40°C, Pre-rinse |
| Noise Level | 44 dB(A) |
| Drying System | Condensation drying |
| Water Connection | Cold water only |
| Adjustable Height | Yes, up to 87 cm |
| Salt and Rinse Aid Indicator | Yes |
| Delay Start | Up to 24 hours |
| Child Safety Lock | Yes |
| Self-Cleaning Filter | Yes |
| Spare Parts Availability | At least 7 years after production |
Frequently Asked Questions - OM 6210-90 T/1 GRAM
How do I start the dishwasher?
Load the dishes, add detergent, close the door, select a program with the program selector knob, and press the start button. Make sure the water supply is open.
What detergent should I use?
Use a dishwasher detergent in tablet, powder, or gel form. For best results, use a combined product with rinse aid and salt if your water is hard.
How do I add salt and rinse aid?
Open the salt compartment (usually at the bottom of the dishwasher) and fill with dishwasher salt. For rinse aid, open the dispenser on the door and pour until the reservoir is full. Adjust the dosage according to water hardness.
Why is my dishwasher not cleaning properly?
Check that the spray arms are not blocked, the filters are clean, and you are using the correct detergent and amount. Also ensure the water temperature is hot enough (inlet temperature should be at least 50°C).
How do I clean the filters?
Turn off the dishwasher, remove the bottom rack, twist the filter assembly counterclockwise and lift it out. Rinse under running water and replace. Clean the microfilter at least once a month.
What does the error code E1 mean?
Error code E1 indicates a water inlet problem. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is sufficient. If the problem persists, contact service.
Can I use the dishwasher without salt?
If your water hardness is low (soft water), you can skip salt, but most detergents work better with salt. It is recommended to use salt to prevent limescale buildup.
How do I prevent bad odors?
Run a cleaning cycle with a dishwasher cleaner or vinegar monthly. Leave the door slightly open after cycles to allow drying. Clean the filters and door seal regularly.
What is the delay start function?
The delay start allows you to set the dishwasher to start later, from 1 to 24 hours. Press the delay button repeatedly to set the desired time, then select a program and press start.
Where can I find spare parts?
Spare parts such as spray arms, filters, and racks are available from authorized Gram service centers or online retailers. Use only original parts for safety and performance.
User questions about OM 6210-90 T/1 GRAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual OM 6210-90 T/1 - GRAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OM 6210-90 T/1 by GRAM.
