System Storage DS3524 - Disk array IBM - Free user manual and instructions
Find the device manual for free System Storage DS3524 IBM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Disk Array Storage System |
| Model | IBM System Storage DS3524 |
| Drive Bays | 24 x 2.5-inch SAS hot-swappable |
| Supported Drives | 2.5-inch SAS, SSD |
| Controller | Dual active-active controllers (standard) |
| Cache Memory | 4 GB to 8 GB per controller |
| RAID Levels | 0, 1, 3, 5, 6, 10, 50, 60 |
| Host Interface | 8 Gbps Fibre Channel or 1/10 Gbps iSCSI (optional) |
| Expansion | Up to 3 expansion enclosures (96 drives total) |
| Dimensions (H x W x D) | 8.7 cm x 44.7 cm x 49.8 cm (3.4 in x 17.6 in x 19.6 in) |
| Weight | 21.3 kg (47 lb) fully loaded |
| Power Supply | Dual redundant 100-240 VAC, 50/60 Hz, 580 W each |
| Power Consumption | Typical 350 W, maximum 450 W |
| Cooling | Dual redundant fan modules |
| Management | Web-based GUI (Storage Manager), CLI, SNMP |
| Maintenance | Hot-swappable drives, power supplies, fans |
| Safety Compliance | FCC, CE, UL, CSA, TUV |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Storage Temperature | -10°C to 50°C (14°F to 122°F) |
| Operating Humidity | 20% to 80% non-condensing |
| Spare Parts | Controller, power supply, fan, drive caddies available |
| Repair Service | IBM warranty or third-party support |
Frequently Asked Questions - System Storage DS3524 IBM
How do I initialize the DS3524 for the first time?
Connect the management port to your network, configure the IP address via the LCD panel or serial console, then use the Storage Manager GUI to create arrays and logical drives.
What RAID levels are supported?
The DS3524 supports RAID levels 0, 1, 3, 5, 6, 10, 50, and 60 for flexibility in performance and redundancy.
Can I mix SAS and SSD drives in the same enclosure?
Yes, but they must be in separate drive groups. The controller can manage both types, but mixing within an array is not recommended.
How do I replace a failed hard drive?
Identify the failed drive via the amber LED. Remove it by pressing the release latch, insert a new drive of the same type, and the array will rebuild automatically if configured with redundancy.
What is the maximum capacity?
With 24 x 2.5-inch SAS drives of up to 2.4 TB each, the internal enclosure supports up to 57.6 TB. With expansion enclosures (up to 96 drives), total capacity can exceed 230 TB.
How do I upgrade firmware?
Download the latest firmware from IBM support. Use the Storage Manager or CLI to apply the upgrade. Ensure both controllers are updated sequentially.
Can I connect the DS3524 directly to a server?
Yes, using direct-attach SAS or Fibre Channel. For multiple servers, use a SAN switch.
What is the default IP address?
The default management IP is 192.168.70.100 (controller A) and 192.168.70.101 (controller B). You can change these via the serial console.
How do I reset the DS3524 to factory defaults?
Press and hold the reset button on the controller for 10 seconds using a paperclip. This will reset network settings and clear the configuration.
Where can I find the user manual?
The user manual is available for free download in PDF format on the notice-facile.com website or directly from IBM support.
User questions about System Storage DS3524 IBM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Disk array in PDF format for free! Find your manual System Storage DS3524 - IBM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. System Storage DS3524 by IBM.
USER MANUAL System Storage DS3524 IBM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IBM
Model : System Storage DS3524
Category : Disk array