AP 7522 - Access Point ZEBRA - Free user manual and instructions
Find the device manual for free AP 7522 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Zebra |
| Model | AP 7522 |
| Dimensions (W x D x H) | 220 x 220 x 45 mm |
| Weight | 1.2 kg |
| Power Supply | PoE (802.3af/at) or 12V DC |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 1.3 Gbps (5 GHz) |
| MIMO Configuration | 3x3:3 |
| Antenna Type | Internal omnidirectional |
| Ethernet Ports | 2 x Gigabit Ethernet (1 PoE in) |
| Management | Web GUI, CLI, SNMP, Cloud |
| Security Features | WPA2, WPA3, 802.1X, VLAN |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5% to 95% (non-condensing) |
| Mounting | Wall or ceiling (bracket included) |
| Certifications | FCC, CE, IC |
| Maintenance | Clean with soft dry cloth; avoid liquids |
Frequently Asked Questions - AP 7522 ZEBRA
What is the default IP address of the Zebra AP 7522?
The default IP address is typically 192.168.1.1 or obtained via DHCP. Check the device label or use the Zebra Discovery Tool.
How do I reset the AP 7522 to factory defaults?
Press and hold the reset button on the device for about 10 seconds using a paperclip until the LEDs flash.
Can the AP 7522 be powered via PoE?
Yes, it supports 802.3af/at PoE on the primary Ethernet port. Alternatively, a 12V DC adapter can be used.
What wireless standards does the AP 7522 support?
It supports 802.11a/b/g/n/ac dual-band, with data rates up to 1.3 Gbps on 5 GHz.
How can I access the web interface?
Connect to the AP's IP address in a web browser. Default credentials are usually admin/admin or as per your network setup.
Does the AP 7522 support mesh networking?
Yes, it can operate in mesh mode along with controller-based or cloud management for seamless roaming.
What security protocols are available?
It supports WPA2, WPA3, 802.1X, MAC filtering, and VLAN to secure wireless access.
Can I mount the AP 7522 on a wall?
Yes, it includes a mounting bracket for wall or ceiling installation. Use appropriate screws and anchors.
How do I update the firmware?
Download the latest firmware from Zebra's website, then upload it via the web interface under Administration > Firmware Upgrade.
What should I do if the AP is not powering on?
Check the PoE injector or power adapter. Verify Ethernet cable connectivity. Try a different port or power source.
User questions about AP 7522 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AP 7522 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP 7522 by ZEBRA.
USER MANUAL AP 7522 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : AP 7522
Category : Access Point