HT 300E - Projector Sim2 - Free user manual and instructions
Find the device manual for free HT 300E Sim2 in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater Projector |
| Model | HT 300E |
| Brand | Sim2 |
| Display Technology | Single-chip DLP |
| Resolution | 1920 x 1080 pixels (Full HD) |
| Aspect Ratio | 16:9 native |
| Brightness | 1000 ANSI lumens (typical) |
| Contrast Ratio | 2000:1 (full on/off, typical) |
| Lamp Type | 200W UHP bulb |
| Lamp Life | Approximately 2000 hours (economy mode up to 3000) |
| Inputs | HDMI, Component (YPbPr), S-Video, Composite, VGA (D-Sub 15) |
| Outputs | 12V trigger, RS-232 control |
| Dimensions (W x D x H) | 430 x 340 x 145 mm |
| Weight | 8.5 kg |
| Power Consumption | 280W typical |
| Noise Level | 24 dB (economy mode) |
| Keystone Correction | Yes, vertical (digital) |
| Lens Shift | Yes, vertical and horizontal (manual) |
| Zoom Ratio | 1.5x motorized |
| Cleaning Instructions | Dust the casing with a soft cloth; use compressed air for vents and optical filter (if present). |
| Safety | Class 1 laser product; do not look into the lens; ensure ventilation slots are unobstructed. |
| Spare Parts & Repair | Replacement lamp, remote control, power supply. Contact Sim2 authorized service centers for repairs. |
Frequently Asked Questions - HT 300E Sim2
What is the native resolution of the Sim2 HT 300E?
The Sim2 HT 300E has a native resolution of 1920 x 1080 pixels (Full HD).
How do I clean the projector lens?
Use a soft, lint-free microfiber cloth gently in a circular motion. For stubborn smudges, apply a small amount of lens cleaning solution to the cloth, never directly on the lens.
What type of lamp does the HT 300E use and how long does it last?
It uses a 200W UHP bulb with a typical life of about 2000 hours in standard mode and up to 3000 hours in economy mode.
Can I mount the projector on the ceiling?
Yes, the projector has a standard ceiling mount option. Ensure the mount supports the weight (8.5 kg) and that ventilation is not obstructed.
Does the HT 300E support 3D?
No, the HT 300E is a 2D-only projector and does not support 3D content.
How do I reset the lamp timer?
After replacing the lamp, go to the on-screen menu under 'Settings' > 'Lamp Hours' and select 'Reset'. Confirm the reset.
What cables are included with the projector?
Typically, a power cord and a remote control with batteries are included. Input cables (HDMI, etc.) are sold separately.
Why is there no image displayed?
Check that the projector is powered on, the input source is correct, and the lens cap is removed. Also ensure the lamp has not reached its end of life.
What is the recommended projection distance for a 100-inch screen?
With the 1.5x zoom, the projection distance for a 100-inch diagonal 16:9 screen is approximately 3.0 to 4.5 meters.
How do I update the firmware?
Firmware updates are performed by an authorized Sim2 technician via the RS-232 port. end users cannot perform updates themselves.
User questions about HT 300E Sim2
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual HT 300E - Sim2 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT 300E by Sim2.
USER MANUAL HT 300E Sim2
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sim2
Model : HT 300E
Category : Projector