PLDED3996A - TV Proscan - Free user manual and instructions
Find the device manual for free PLDED3996A Proscan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED TV |
| Brand | Proscan |
| Model | PLDED3996A |
| Screen Size (Diagonal) | 39 inches (99 cm) |
| Resolution | 1366 x 768 (HD) |
| Refresh Rate | 60 Hz |
| Backlight Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Component Video Input | 1 |
| Composite Video Input | 1 |
| RF Input | 1 |
| Audio Output (Headphone) | 1 |
| Power Consumption (Typical) | 70 W |
| Power Supply | AC 100-240V, 50/60 Hz |
| Stand Dimensions (W x D) | 31.5 x 8.3 inches (80 x 21 cm) |
| TV Without Stand (W x H x D) | 35.4 x 20.5 x 3.1 inches (90 x 52 x 8 cm) |
| TV With Stand (W x H x D) | 35.4 x 22.4 x 8.3 inches (90 x 57 x 21 cm) |
| Weight Without Stand | 13.2 lbs (6 kg) |
| Weight With Stand | 14.3 lbs (6.5 kg) |
| VESA Mount Pattern | 200 x 200 mm |
| Remote Control Model | RC-301 |
Frequently Asked Questions - PLDED3996A Proscan
How do I connect my Proscan PLDED3996A TV to a cable box?
Use an HDMI cable to connect the cable box's HDMI Out to one of the TV's HDMI ports. Then select the corresponding HDMI input using the Source button on the remote.
What is the screen size and resolution?
The screen measures 39 inches diagonally and has a resolution of 1366 x 768 (HD).
How can I mount the TV on a wall?
The TV supports VESA 200 x 200 mm mounting. Use a compatible wall mount kit and follow the instructions in the manual. Ensure the wall can support the TV's weight (approx. 13-14 lbs).
Why is there no sound from the TV speakers?
First check if the volume is muted or turned down low. Verify that audio cables are properly connected if using external devices. Also, ensure the TV's audio output setting is set to TV speaker (not external audio).
How do I perform a factory reset?
Press Menu on the remote, go to Settings > System > Reset & Admin, then select Factory Reset. Confirm when prompted. This will erase all custom settings.
Can I connect a USB flash drive to play media?
Yes, insert a USB drive into the USB port. Use the Media button on the remote to access photos, music, and video files. Supported formats include MP4, AVI, JPG, and MP3.
What should I do if the TV remote stops working?
First replace the AAA batteries (2x). Make sure there are no obstacles between the remote and the TV sensor. If still not working, try resetting the remote by removing batteries, pressing all buttons for 10 seconds, then reinserting batteries.
How do I scan for TV channels?
Connect an antenna or cable to the RF input. Press Menu, go to Channel, select Auto Scan, and choose Air or Cable depending on your signal source. The TV will scan and store available channels.
Is the TV energy efficient?
The typical power consumption is 70 watts. It is designed to meet energy efficiency standards. To save power, enable Eco Mode in the settings menu.
How do I clean the screen safely?
Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. For stubborn spots, slightly dampen the cloth with water (not direct spray). Never use abrasive cleaners, alcohol, or paper towels.
User questions about PLDED3996A Proscan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV in PDF format for free! Find your manual PLDED3996A - Proscan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLDED3996A by Proscan.
USER MANUAL PLDED3996A Proscan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Proscan
Model : PLDED3996A
Category : TV