DAP-1860 - Wi-Fi repeater D-LINK - Free user manual and instructions
Find the device manual for free DAP-1860 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Range Extender / Repeater |
| Model | DAP-1860 |
| Brand | D-Link |
| Wireless Standard | IEEE 802.11ac/n/g/b/a |
| Frequency Band | Dual-band (2.4 GHz + 5 GHz) |
| Maximum Speed | Up to 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Antennas | 2 external antennas (fixed) |
| Interfaces | 1 x Gigabit Ethernet port (10/100/1000 Mbps) |
| Power Supply | Built-in AC plug (100-240V, 50/60 Hz) |
| Dimensions (W x D x H) | Approx. 85 x 55 x 110 mm (3.3 x 2.2 x 4.3 in) |
| Weight | Approx. 150 g (5.3 oz) |
| Security | WPA/WPA2-PSK, WEP 64/128-bit, WPS push button |
| LED Indicators | Power, Wi-Fi, WPS, LAN, Signal strength (3-level) |
| Buttons | WPS/Reset button, Power button (some models) |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Humidity | 10% to 90% non-condensing |
| Key Features | Dual-band concurrent, high-speed Wi-Fi, easy setup with WPS, wall-plug design, signal strength LED |
| Compatibility | Works with any standard Wi-Fi router |
| Setup | Via web interface or D-Link Wi-Fi app (iOS/Android) |
| Maintenance & Cleaning | Wipe with dry cloth; keep ventilation slots clear |
| Spare Parts & Repairability | No user-serviceable parts; contact D-Link support for issues |
Frequently Asked Questions - DAP-1860 D-LINK
How do I set up the DAP-1860?
Plug the DAP-1860 into a wall outlet near your router. Press the WPS button on your router, then press the WPS button on the DAP-1860 within 2 minutes. The Wi-Fi signal will extend automatically. Alternatively, use the D-Link Wi-Fi app or connect via Ethernet to configure manually.
What is the default IP address of DAP-1860?
The default IP address is 192.168.0.50 (or 192.168.0.1 depending on firmware). You can access the web interface by connecting to the extender's network and entering the IP in a browser.
How do I reset the DAP-1860 to factory defaults?
With the device powered on, use a paperclip to press and hold the Reset button (usually recessed) for about 10 seconds until the LED blinks. The extender will reboot with factory settings.
What is the maximum range of DAP-1860?
The range depends on your environment. Typically, the DAP-1860 can extend Wi-Fi up to 300 meters (984 ft) in open space. Walls and obstacles reduce the effective range.
Does DAP-1860 support dual-band?
Yes, it supports dual-band operation (2.4 GHz and 5 GHz) simultaneously, providing faster speeds and reduced interference.
Can I use DAP-1860 as a wireless access point?
Yes, the DAP-1860 can be configured as an access point by connecting it to your router via Ethernet and changing the operating mode in the settings.
How do I update the firmware?
Download the latest firmware from D-Link's support website. Log into the web interface, go to Management > Firmware Update, and upload the file. Do not power off during the update.
What do the signal strength LEDs mean?
The three LEDs indicate signal quality between the extender and the router: 3 LEDs = strong, 2 = medium, 1 = weak. If only 1 LED is lit, move the extender closer to the router.
Is the DAP-1860 compatible with all routers?
Yes, it works with any standard Wi-Fi router that supports 802.11a/b/g/n/ac. For WPS setup, your router must also support WPS.
How can I improve the performance of my DAP-1860?
Place the extender halfway between your router and the dead zone. Avoid obstacles like thick walls or metal. Use the 5 GHz band for less interference. Keep firmware updated.
User questions about DAP-1860 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual DAP-1860 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAP-1860 by D-LINK.