Eurodesk MX8000A - Mixer BEHRINGER - Free user manual and instructions
Find the device manual for free Eurodesk MX8000A BEHRINGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Mixing Console |
| Model | Eurodesk MX8000A |
| Brand | Behringer |
| Number of Channels | 32 (mono) + 4 stereo returns |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.006% |
| EQ Bands | 4-band (High, Mid-High, Mid-Low, Low) with sweepable mids |
| Aux Sends | 6 (4 pre, 2 post) |
| Subgroups | 4 |
| Master Output | Stereo balanced XLR |
| Phantom Power | +48V for all channels |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Dimensions (H x W x D) | 5.5" x 19" x 20" (140 x 483 x 508 mm) |
| Weight | 26.5 kg (58.4 lbs) |
| Rack Mountable | Yes (19" rack ears included) |
| Cleaning Instructions | Use a soft dry cloth; avoid solvents and abrasives |
| Safety Precautions | Disconnect power before cleaning; do not expose to moisture |
| Spare Parts Availability | Contact Behringer support for replacements |
Frequently Asked Questions - Eurodesk MX8000A BEHRINGER
How do I connect the mixer to a PA system?
Connect the main outputs (balanced XLR) to your PA system's inputs. Ensure proper gain staging.
Can I use the mixer with a computer?
Yes, via line outputs (RCA or TRS) to your audio interface. There is no built-in USB, but you can use external converters.
What is phantom power and how do I enable it?
Phantom power (+48V) is required for condenser microphones. Enable it by pressing the +48V button on the master section. It applies to all channels.
How to set up aux sends for monitor mixes?
Route the aux send outputs to monitor amps. Use the pre-fader setting (aux 1-4) so the monitor mix is independent of channel faders.
How do I use the EQ effectively?
Each channel has a 4-band EQ. For vocals, cut low frequencies (around 80 Hz) to reduce rumble. Use sweepable mids to find and reduce problem frequencies.
Why is there no sound from the mixer?
Check power, mute buttons, and channel faders. Ensure the master fader is up and that you have connected cables properly. Also check if the phantom power is needed.
Can I use this mixer for recording?
Yes, use direct outputs (if available) or group outputs to send individual channels to your recorder. Alternatively, connect the main outs for a stereo mix.
What type of cables do I need?
Use XLR cables for microphone inputs, TRS cables for line inputs and aux sends, and RCA cables for CD/tape inputs.
How to clean the mixer?
Use a soft dry cloth to wipe surfaces. Do not use any liquids, solvents, or abrasive cleaners. Disconnect power before cleaning.
How do I obtain spare parts or service?
Contact Behringer support via their website or authorized service centers. Provide the model (Eurodesk MX8000A) and serial number.
User questions about Eurodesk MX8000A BEHRINGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual Eurodesk MX8000A - BEHRINGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Eurodesk MX8000A by BEHRINGER.