FLEX 16 SR3 - Camcorder ARRI - Free user manual and instructions
Find the device manual for free FLEX 16 SR3 ARRI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16mm Motion Picture Camera |
| Brand | ARRI |
| Model | FLEX 16 SR3 |
| Film Format | 16mm |
| Lens Mount | PL (Positive Lock) |
| Frame Rates | 24, 25, 30 fps (crystal sync) |
| Shutter | Rotating mirror reflex shutter with adjustable opening (0° - 180°) |
| Viewfinder | Bright, high-contrast ground glass with 12x magnification |
| Magazine Capacity | 400 ft (120 m) coaxial magazines |
| Dimensions (L x H x W) | 14.5 x 7.5 x 6.3 in (368 x 190 x 160 mm) |
| Weight (body only) | 13.2 lbs (6 kg) |
| Power Supply | 12-14 V DC (on-board battery or external source) |
| Power Consumption | Approx. 30 W |
| Operating Temperature | -20°C to +55°C |
| Sound Level | Less than 28 dB (A) at 1 m |
| Key Features | Crystal sync, Inching control, Laptop support, Timecode input |
| Maintenance | Regular cleaning of film gate and pressure plate; professional servicing recommended |
| Spare Parts & Repairability | ARRI service network; many parts available |
Frequently Asked Questions - FLEX 16 SR3 ARRI
How do I load film into the ARRI FLEX 16 SR3?
Open the camera door, insert a 400 ft coaxial magazine, and thread the film through the gate using the marking guides. Ensure the loops are formed correctly before closing.
What type of battery does the SR3 use?
It uses a 12V on-board battery (ARRI BP series) or an external 12-14V DC source via the 4-pin XLR connector.
How do I change the frame rate?
Use the crystal sync selector switch on the side panel to choose between 24, 25, or 30 fps. Lock the switch to prevent accidental changes.
What is the correct shutter angle for normal motion?
The standard shutter angle is 144° (flickerless with HMI lights). Adjustable from 0° to 180° using the shutter dial.
How do I clean the film gate?
Remove the lens and use a gate cleaning kit with a non-abrasive brush and blower. Never use solvents on the gate area.
The camera won't run. What could be wrong?
Check the main power switch and battery connection. Ensure the magazine is latched correctly. If using timecode, verify the input is active.
How do I synchronize the SR3 with sound?
Use the timecode input (BNC) to jam sync with an external timecode generator. The camera can also be genlocked via the sync input.
What lenses are compatible?
The camera uses PL-mount lenses. ARRI, Zeiss, Cooke, and other cine lenses in PL mount fit. Adapters are available for other mounts.
How do I remove the magazine?
Turn the magazine lock lever to the 'unlock' position, support the magazine, and slide it off the camera body. Cover the film opening.
What is the recommended service interval?
Professional service is recommended annually or after 100,000 ft of film. Regular cleaning of the gate and moving parts is essential.
User questions about FLEX 16 SR3 ARRI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camcorder in PDF format for free! Find your manual FLEX 16 SR3 - ARRI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLEX 16 SR3 by ARRI.
USER MANUAL FLEX 16 SR3 ARRI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ARRI
Model : FLEX 16 SR3
Category : Camcorder