CP-TW2505 - Projector HITACHI - Free user manual and instructions
Find the device manual for free CP-TW2505 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Projector |
| Brand | Hitachi |
| Model | CP-TW2505 |
| Projection Technology | 3LCD |
| Resolution | WXGA (1280 x 800) |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 3000:1 |
| Lamp Life | Up to 5000 hours (Eco mode) |
| Throw Ratio | 0.3:1 (short throw) |
| Input Terminals | HDMI, VGA, S-Video, Composite, USB, Audio |
| Output Terminals | VGA monitor out, Audio out |
| Dimensions (W x H x D) | 306 x 110 x 249 mm |
| Weight | 3.4 kg |
| Power Consumption | 300W (Normal mode) |
| Noise Level | 31 dB (Eco mode) |
| Built-in Speaker | 16W monaural |
| Keystone Correction | Vertical: ±5° |
| Lamp Replacement | User-replaceable (DT01481) |
| Filter Cleaning | Clean every 100 hours |
| Safety Features | Kensington lock, password protection |
Frequently Asked Questions - CP-TW2505 HITACHI
How do I replace the lamp on the Hitachi CP-TW2505?
Turn off and unplug the projector, let it cool for at least 45 minutes. Unscrew the lamp cover on the side, remove the old lamp, install the new one (part number DT01481), and tighten the screws. Reset the lamp timer in the menu.
What is the throw ratio and how close can I place the projector to the screen?
The CP-TW2505 has a short throw ratio of 0.3:1. For a 80-inch image, place the projector about 0.5 meters from the screen.
Can I connect my laptop to the projector using HDMI?
Yes, the projector has an HDMI port. Use a standard HDMI cable to connect your laptop. Ensure the laptop output is set to extend or duplicate.
Why is the projector not turning on?
Check the power cord connection and the wall outlet. Make sure the projector has cooled down after a lamp shutdown. If the lamp has reached its life limit, replace it. Also check if the air filter is clogged.
How do I clean the air filter?
Turn off the projector and unplug it. Locate the air filter on the bottom or side. Gently remove the filter and vacuum or rinse with water (dry completely before reinstalling). Do not operate without filter.
What resolutions does the projector support?
Native resolution is WXGA (1280x800). It can accept up to 1080p and scale it to fit. For best quality, use a native WXGA source.
Can I use the projector for rear projection?
Yes, the CP-TW2505 supports rear projection. Change the projection mode in the menu to 'Rear' or 'Rear Ceiling Mount' depending on installation.
Does the projector have a remote control?
Yes, a remote control is included with basic functions like power, input selection, menu, and volume. Batteries are not included.
What is the recommended maintenance schedule?
Clean the air filter every 100 hours of use. Replace the lamp after 5000 hours (Eco) or 3000 hours (Normal). Periodically clean the lens with a soft cloth.
Can I mount the projector on the ceiling?
Yes, the CP-TW2505 supports ceiling mounting. Use a compatible mount (e.g., Hitachi P/N 311-5795). Ensure the ceiling can support the projector's weight.
User questions about CP-TW2505 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual CP-TW2505 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-TW2505 by HITACHI.