Babyface Pro FS - DJ Equipment RME - Free user manual and instructions
Find the device manual for free Babyface Pro FS RME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB Audio Interface |
| Brand | RME |
| Model | Babyface Pro FS |
| Category | DJ Equipment |
| Dimensions (H x W x D) | 108 x 62 x 45 mm |
| Weight | 180 g |
| Power Supply | USB bus power or optional external 12V DC power supply |
| Analog Inputs | 2 x XLR/TRS combo (mic/line), 2 x line input (1/4") |
| Analog Outputs | 4 x line output (1/4") |
| Digital I/O | ADAT (8 channels), S/PDIF, MIDI |
| Sample Rate | Up to 192 kHz |
| Bit Depth | 24-bit |
| Total Channels | 12 inputs / 12 outputs |
| DSP Features | TotalMix FX with EQ, dynamics, reverb |
| USB Version | USB 2.0 |
| Headphone Output | 1 x 1/4" stereo, separate level control |
| Included Accessories | USB cable, breakout cable for MIDI and S/PDIF |
| Maintenance | Clean with a soft dry cloth; avoid liquids and solvents |
| Safety | Use only with supplied or compatible power supply; avoid moisture |
| Repairability | No user-serviceable parts; contact RME support for repairs |
Frequently Asked Questions - Babyface Pro FS RME
How do I connect the Babyface Pro FS to my computer?
Use the supplied USB cable to connect the interface to a USB 2.0 or 3.0 port on your computer. The interface is powered via USB, so no external power is required for basic operation.
Can I use the Babyface Pro FS with an iPad?
Yes, the Babyface Pro FS works with iPad via the Apple Camera Connection Kit or a USB-C to Lightning adapter, provided the iPad supplies enough power. An external power supply may be needed for some iPad models.
What is TotalMix FX and how do I use it?
TotalMix FX is RME's DSP mixing software that allows you to route and process audio with EQ, dynamics, and reverb. It can be used for zero-latency monitoring and creating custom headphone mixes.
How many inputs and outputs does the Babyface Pro FS have?
The interface has 12 inputs and 12 outputs, including 4 analog inputs, 4 analog outputs, and 8 ADAT channels (when using the optical port).
What is the maximum sample rate?
The Babyface Pro FS supports sample rates up to 192 kHz with 24-bit resolution.
Do I need to install drivers?
Yes, download the latest drivers from the RME website. The drivers are required for low-latency performance and full functionality on Windows. On Mac, class-compliant mode may work but drivers are recommended.
How do I set up direct monitoring?
Open TotalMix FX and enable input monitoring by clicking the monitor button on the input channel. Adjust levels to hear the input signal directly without computer latency.
What do the breakout cables do?
The included breakout cable provides connections for MIDI I/O and S/PDIF I/O via two 9-pin D-sub connectors, allowing you to connect classic MIDI gear and digital audio devices.
Can I use the Babyface Pro FS with a microphone?
Yes, the first two inputs are combo jacks that accept XLR microphones. They have 48V phantom power for condenser mics, which can be toggled via TotalMix FX or the front panel button.
How do I reset the Babyface Pro FS to factory settings?
Press and hold the SETUP button while powering on the device. Continue holding until all LEDs flash, then release. This resets all settings to default.
User questions about Babyface Pro FS RME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Babyface Pro FS - RME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Babyface Pro FS by RME.
USER MANUAL Babyface Pro FS RME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RME
Model : Babyface Pro FS
Category : DJ Equipment