EA3500S35B - Saw MAKITA - Free user manual and instructions
Find the device manual for free EA3500S35B MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gasoline Chainsaw |
| Brand | Makita |
| Model | EA3500S35B |
| Engine Displacement | 35.0 cm³ |
| Power Output | 1.5 kW (2.0 hp) |
| Bar Length | 35 cm (14 in) |
| Chain Pitch | 3/8 in |
| Chain Gauge | 1.3 mm (0.050 in) |
| Fuel Tank Capacity | 0.31 L |
| Oil Tank Capacity | 0.20 L |
| Weight (without bar and chain) | 4.6 kg |
| Sound Pressure Level | 101 dB(A) |
| Vibration Level (front handle) | 7.5 m/s² |
| Vibration Level (rear handle) | 8.5 m/s² |
| Chain Brake | Inertia-activated |
| Ignition System | Electronic (CDI) |
| Carburetor | Diaphragm type |
| Recommended Fuel | 50:1 gasoline-oil mix |
| Maintenance | Clean air filter weekly; sharpen chain regularly |
| Safety Features | Chain brake, hand guard, throttle lockout |
| Spare Parts Availability | Contact Makita service centers |
Frequently Asked Questions - EA3500S35B MAKITA
What type of fuel does the EA3500S35B chainsaw use?
Use a 50:1 mixture of unleaded gasoline and high-quality 2-cycle oil. Do not use pure gasoline or mixed fuel older than 30 days.
How do I adjust the chain tension on this chainsaw?
Loosen the bar nuts, turn the tensioning screw (located on the bar) clockwise to tighten, then retighten the nuts. The chain should sag about 1-2 mm when pulled.
What is the correct chain pitch and gauge for replacement?
The chain pitch is 3/8 in and the gauge is 1.3 mm (0.050 in). Always use a chain that matches these specifications.
How do I start the EA3500S35B?
Set the choke to the cold start position, press the primer bulb 5-7 times, pull the starter cord until the engine fires, then open the choke and pull again to start.
What should I do if the chain does not get oil?
Check the oil tank level, clean the oil passage, and ensure the oil pump is working. Also check that the oil hole on the bar is not blocked.
How often should I clean or replace the air filter?
Clean the air filter after every 5 hours of use or more often in dusty conditions. Replace it if damaged or heavily clogged.
Can I use a longer bar on this chainsaw?
The recommended bar length is 35 cm (14 in). Using a longer bar may reduce cutting performance and increase wear. Check the manual for approved lengths.
What safety features does the EA3500S35B have?
It has an inertia-activated chain brake, hand guard, throttle lockout, and anti-vibration handles. Always wear protective gear.
How do I replace the spark plug?
Remove the spark plug cap, unscrew the old plug, check the gap (0.5-0.6 mm), install a new plug (e.g., NGK BPMR7A), and tighten securely.
Where can I find spare parts for this model?
Spare parts are available at authorized Makita service centers and online retailers. Always use genuine Makita parts for safety.
User questions about EA3500S35B MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual EA3500S35B - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EA3500S35B by MAKITA.