HFO 3C23 WF UK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free HFO 3C23 WF UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Hotpoint |
| Model | HFO 3C23 WF UK |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 45 kg |
| Energy Efficiency Class | E |
| Annual Energy Consumption | 295 kWh |
| Annual Water Consumption | 3080 L |
| Number of Place Settings | 13 |
| Noise Level | 49 dB(A) |
| Programs | Eco, Intensive, Normal, Quick, Pre-wash |
| Drying Performance | Class A |
| Safety Features | Child lock, Anti-flood protection, Aquastop |
| Material (Interior) | Stainless steel |
| Water Connection | Cold water only |
| Power Supply | 230 V, 50 Hz, 1900 W |
| Noise Level | 49 dB(A) |
| Height Adjustable Upper Basket | Yes |
| Cutlery Basket | Yes (3rd rack optional) |
| Delay Start | Up to 24 hours |
| Salt and Rinse Aid Indicators | Yes |
| Removable Top | Yes (for under-counter installation) |
| Spare Parts Availability | Minimum 7 years |
| Repair Index (if applicable) | Not available for UK |
Frequently Asked Questions - HFO 3C23 WF UK HOTPOINT
How do I install the dishwasher?
Installation requires a cold water connection, a drain hose, and electrical socket. Ensure the appliance is level using the adjustable feet. For under-counter installation, remove the top panel. Refer to the manual for detailed steps.
What does the ECO program do?
The ECO program is the most energy-efficient cycle, using lower temperatures and longer wash times to save energy and water. It is suitable for normally soiled dishes.
How do I clean the filter?
The filter should be cleaned regularly. Remove the lower basket, unscrew the cylindrical filter, rinse under running water, and reassemble. A dirty filter can affect washing performance.
Why is the dishwasher not draining?
Check if the drain hose is kinked or blocked. Clean the filter and ensure the sink drain is not clogged. If the problem persists, the drain pump may be faulty.
What does the salt indicator mean?
The salt indicator lights up when the water softener needs regeneration. Add dishwasher salt to the designated compartment to prevent limescale buildup.
Can I use regular dish soap?
No, only use special dishwasher detergent (powder, gel, or tabs). Regular dish soap causes excessive suds and may damage the appliance.
How do I reset the dishwasher?
Press and hold the Start/Reset button for 3 seconds to cancel a cycle. For a full factory reset, unplug the dishwasher for 1 minute and plug back in.
What is the maximum load capacity?
The dishwasher holds up to 13 place settings. Avoid overloading to ensure proper cleaning and drying.
How do I adjust the water hardness setting?
Refer to the manual to find the water hardness level in your area. Then, using the control panel, set the appropriate level (usually between 1 and 5) to optimize salt usage.
The dishes are not drying properly. What can I do?
Ensure you use rinse aid, select a program with drying phase, and open the door slightly after cycle ends. Also, check that the heating element is working.
User questions about HFO 3C23 WF UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HFO 3C23 WF UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HFO 3C23 WF UK by HOTPOINT.
USER MANUAL HFO 3C23 WF UK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : HFO 3C23 WF UK
Category : Dishwasher