Connect RV 65 - TV signal amplifier Wilson - Free user manual and instructions
Find the device manual for free Connect RV 65 Wilson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Signal Amplifier |
| Brand | Wilson |
| Model | Connect RV 65 |
| Dimensions (approx.) | 4.5 x 2.8 x 1.2 inches |
| Weight | 0.5 lbs |
| Power Supply | 12V DC, 500mA (adapter included) |
| Frequency Range | 50-860 MHz |
| Gain | 20 dB typical |
| Noise Figure | < 3 dB |
| Impedance | 75 Ohms |
| Connector Type | F-type female |
| Number of Outputs | 1 |
| Compatible Signals | Digital and analog TV |
| Indoor/Outdoor Use | Indoor only |
| Main Functions | Signal amplification, improves weak TV reception |
| Installation | Connect between antenna and TV, requires power |
| Cleaning | Wipe with dry cloth, do not use liquids |
| Safety Precautions | Disconnect power before cleaning, avoid moisture |
| Spare Parts Availability | Power adapter, coaxial cables (standard F-type) |
| Repairability | Limited; contact Wilson support |
| General Information | Designed for RV and mobile use, compact size |
| Certifications | FCC compliant |
Frequently Asked Questions - Connect RV 65 Wilson
How do I install the Wilson Connect RV 65 amplifier?
Connect the amplifier between your TV antenna and TV. Use a coaxial cable from the antenna to the amplifier input. Another cable connects the amplifier output to your TV. Plug the power adapter into a 12V outlet. Ensure all connections are tight.
Can I use this amplifier for both digital and analog TV signals?
Yes, the Wilson Connect RV 65 amplifies both digital and analog TV signals in the 50-860 MHz range.
What is the gain of the amplifier?
The amplifier provides approximately 20 dB gain, effectively boosting weak signals for better reception.
Does the amplifier work with satellite TV?
No, this amplifier is designed for terrestrial TV signals only (OTA broadcasts). It may not work with satellite frequencies.
How do I power the amplifier?
The amplifier requires a 12V DC power supply (included). Plug it into a standard 12V outlet, such as a cigarette lighter or direct battery connection.
What type of coaxial cable is recommended?
Use RG6 or RG59 coaxial cable with F-type connectors for best performance. Keep cable runs as short as possible.
Can I connect multiple TVs to one amplifier?
The Connect RV 65 has a single output. To connect multiple TVs, you would need a splitter after the amplifier, which may reduce signal strength.
Is the amplifier weatherproof?
No, the Wilson Connect RV 65 is designed for indoor use only. Protect it from moisture and extreme temperatures.
Why is my TV still not getting good reception after installation?
Check all connections. Ensure the amplifier is powered. Position your antenna optimally. The amplifier may not overcome very weak or obstructed signals. Try adjusting antenna height or direction.
How do I clean and maintain the amplifier?
Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use water or cleaning solvents. Inspect cables for damage periodically.
User questions about Connect RV 65 Wilson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV signal amplifier in PDF format for free! Find your manual Connect RV 65 - Wilson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Connect RV 65 by Wilson.
USER MANUAL Connect RV 65 Wilson
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wilson
Model : Connect RV 65
Category : TV signal amplifier