FRI7240WR - Fridge VIKING - Free user manual and instructions
Find the device manual for free FRI7240WR VIKING in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | Viking |
| Model | FRI7240WR |
| Installation Type | Built-in |
| Total Capacity | 20.2 cu ft |
| Cooling System | Frost-free |
| Defrost System | Automatic |
| Energy Consumption | Approximately 600 kWh/year |
| Power Supply | 120V, 60Hz, 15A |
| Control Type | Electronic digital display |
| Temperature Range | 34°F – 45°F (refrigerator) |
| Interior Lighting | LED |
| Door Alarm | Yes |
| Child Lock | Yes |
| Safety Features | Child lock, door ajar alarm |
| Maintenance | Clean condenser coils annually |
| Spare Parts | Available through Viking service |
| Warranty | 2 years parts and labor |
Frequently Asked Questions - FRI7240WR VIKING
How do I set the refrigerator temperature?
Press the TEMP button on the control panel to cycle through settings. The recommended temperature is 37°F for the refrigerator. Allow 24 hours for stabilization.
Why is the door alarm sounding?
The door alarm sounds if the refrigerator door is open for more than 2 minutes. Close the door securely to stop the alarm. If the alarm persists, check for obstructions.
How often should I change the water filter?
Replace the water filter every 6 months to maintain water quality. Use only genuine Viking filters (part number VWF-100). Refer to the manual for replacement instructions.
How do I clean the condenser coils?
Unplug the refrigerator and remove the lower grille. Use a vacuum with a brush attachment to gently clean the coils. Reattach the grille and plug the unit back in.
What does 'E1' error code mean?
Error code E1 indicates a temperature sensor failure. Contact Viking customer service for repair. Do not attempt to fix the sensor yourself.
Is the refrigerator energy star rated?
Yes, the FRI7240WR is Energy Star certified, which means it meets strict energy efficiency guidelines set by the EPA.
Can I install the refrigerator myself?
Installation should be performed by a qualified professional due to built-in requirements, water line connection, and leveling. Improper installation may void the warranty.
Why is there ice buildup in the freezer?
Ice buildup can occur if the door is left open frequently or the seal is damaged. Check the door gasket for tears and ensure the door closes completely.
How do I enable the child lock?
Press and hold the ALARM and TEMP buttons simultaneously for 3 seconds. A lock icon will appear on the display. Repeat to disable.
What are the recommended clearance for installation?
Allow at least 1/16 inch clearance on sides and top for proper ventilation. Refer to the installation manual for exact dimensions based on your cabinetry.
User questions about FRI7240WR VIKING
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual FRI7240WR - VIKING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FRI7240WR by VIKING.