PLC-SU31 - Projector SANYO - Free user manual and instructions
Find the device manual for free PLC-SU31 SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Projector |
| Brightness | 2000 ANSI Lumens |
| Native Resolution | SVGA (800 x 600) |
| Contrast Ratio | 400:1 |
| Lamp Life | 2000 hours (Normal mode), 3000 hours (Eco mode) |
| Projection Distance | 1.2 - 10.2 m |
| Projection Screen Size | 0.76 - 7.62 m (30 - 300 inches) |
| Aspect Ratio | 4:3 (native), 16:9 (compatible) |
| Keystone Correction | Vertical: +/- 30 degrees |
| Inputs | VGA, S-Video, Composite Video, Audio |
| Outputs | VGA (pass-through), Audio |
| Dimensions (W x H x D) | 260 x 92 x 210 mm |
| Weight | 2.9 kg |
| Power Consumption | 220 W (Normal), 180 W (Eco) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Lamp Type | 150 W UHP |
| Noise Level | 35 dB (Normal), 30 dB (Eco) |
| Maintenance | Clean air filter every 100 hours; replace lamp after 2000 hours |
| Safety Features | Auto power-off after 30 min inactivity; security bar for anti-theft |
| Spare Parts / Repairability | Replacement lamps (POA-LMP36), air filters available; service by authorized technicians |
| General Information | Designed for portable presentations; compatible with most operating systems |
Frequently Asked Questions - PLC-SU31 SANYO
How do I replace the lamp in my Sanyo PLC-SU31 projector?
Turn off and unplug the projector. Allow it to cool for at least 45 minutes. Open the lamp cover on the bottom, unscrew the lamp module, and replace with a new POA-LMP36 lamp. Reset the lamp timer via the menu.
What does the 'Temp' indicator light mean?
The Temp (temperature) indicator lights up when the projector is overheating. Check that the air filter is clean and ensure adequate ventilation. If the light persists, contact support.
How can I connect my laptop to the PLC-SU31?
Use a VGA cable to connect your laptop's VGA output to the projector's Computer In port. Alternatively, use an HDMI-to-VGA adapter if your laptop has HDMI. Select the correct input source via the Source button.
Why is the image distorted or trapezoidal?
Adjust the Keystone correction using the menu or dedicated button on the remote. Place the projector on a flat surface perpendicular to the screen for best results.
How often should I clean the air filter?
Clean the air filter every 100 hours of use. Use a vacuum cleaner to remove dust. Replace the filter if it is damaged or after 500 hours.
Can I project from a USB drive?
No, the Sanyo PLC-SU31 does not have USB playback capabilities. Connect a computer or media player via VGA or S-Video.
What is the native resolution and aspect ratio?
The native resolution is SVGA (800x600) with a 4:3 aspect ratio. It can accept signals up to 1080p but will scale them.
How do I reset the lamp timer?
After replacing the lamp, go to the Setup menu, select 'Lamp Timer Reset', and press Enter. Confirm the reset.
The projector turns off unexpectedly. What could be wrong?
Possible causes: overheating (clean filter, ensure ventilation), lamp failure (replace lamp), or the auto-power-off setting (check menu). If the problem persists, contact service.
Where can I find replacement parts?
Replacement lamps (POA-LMP36) and air filters are available from authorized Sanyo dealers or online retailers. Use genuine parts to ensure safety and performance.
User questions about PLC-SU31 SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PLC-SU31 - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-SU31 by SANYO.
USER MANUAL PLC-SU31 SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-SU31
Category : Projector