PLC-XU86 - Projector SANYO - Free user manual and instructions
Find the device manual for free PLC-XU86 SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Projector |
| Model | PLC-XU86 |
| Brand | Sanyo |
| Dimensions (W x D x H) | Approx. 16.0 x 11.0 x 4.0 inches (408 x 280 x 102 mm) |
| Weight | Approx. 8.2 lbs (3.7 kg) |
| Power Supply | AC 100-240V, 50/60 Hz, 3.2A |
| Power Consumption | 300W (max), 0.5W (standby) |
| Display Technology | 3LCD, 0.6-inch p-Si TFT |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3000 ANSI lumens |
| Contrast Ratio | 500:1 |
| Lens | Manual zoom and focus, f=18.4-22.1mm, F1.6-1.9 |
| Lamp Type | 200W UHP, model POA-LMP105 |
| Lamp Life | 3000 hours (standard), 4000 hours (eco mode) |
| Keystone Correction | Automatic vertical: ±30° |
| Inputs | RGB (D-sub 15-pin), S-Video, Composite, Audio (RCA), USB (for mouse) |
| Outputs | RGB (D-sub 15-pin), Audio (3.5mm) |
| Control | RS-232C (D-sub 9-pin), Wireless remote |
| Fan Noise | 35 dB (standard), 30 dB (eco mode) |
| Maintenance | Clean air filter every 100 hours; replace lamp as needed |
| Safety | UL, CSA, CE, FCC Class B |
| Spare Parts & Repairability | Spare lamp (POA-LMP105), air filter, remote control; user-replaceable lamp and filter |
Frequently Asked Questions - PLC-XU86 SANYO
How do I replace the lamp on my Sanyo PLC-XU86 projector?
Turn off the projector and unplug it. Wait 45 minutes for the lamp to cool. Remove the lamp cover screw, slide the cover off, push down the locking lever, and pull out the lamp module. Insert the new lamp (model POA-LMP105) and secure the lever. Replace the cover and screw. Reset the lamp timer in the menu (Options > Lamp Timer Reset).
What is the native resolution of the Sanyo PLC-XU86?
The native resolution is XGA (1024 x 768). It can accept signals up to 1080i and SXGA+ via compression.
Can I connect my laptop to this projector?
Yes, use the RGB (D-sub 15-pin) input. For newer laptops without VGA, you may need an HDMI-to-VGA adapter. The projector also supports S-Video and Composite video inputs.
How do I clean the air filter?
Turn off and unplug the projector. Locate the air filter on the side or bottom (varies by model). Slide it out and vacuum gently or wash with mild soap and water. Dry completely before reinstalling. Clean every 100 hours of use.
The image is upside down, how do I correct it?
Go to the menu (press MENU button), select Settings or Installation, then choose Projection. Options: Front, Rear, Ceiling Front, Ceiling Rear. Select accordingly.
What is the lamp life and where can I buy a replacement?
Standard lamp life is 3000 hours, up to 4000 hours in eco mode. Replacement lamp module is POA-LMP105. Check online retailers or authorized Sanyo dealers.
How do I perform a keystone correction?
Press the KEYSTONE button on the remote or access the menu under Settings > Keystone. Use the arrow keys to adjust vertical keystone (up to ±30°). For horizontal keystone, some models require manual lens shift.
The projector turns off after a few minutes, what's wrong?
Possible causes: overheating (check air filter and fan), lamp nearing end of life, or power supply issue. Ensure vents are clear, clean filter, and monitor lamp hours. If problem persists, consult a technician.
Can I use this projector for home theater?
It is suitable for presentations but can be used for movies. For best results, use in a dark room. Consider adding an external speaker via audio output (3.5mm) as built-in speaker is 1W.
What are the remote control functions?
The remote controls power, input selection, menu navigation, keystone, zoom, focus (if motorized), mute, volume, and pointer. It uses two AAA batteries (not included).
User questions about PLC-XU86 SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PLC-XU86 - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-XU86 by SANYO.
USER MANUAL PLC-XU86 SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-XU86
Category : Projector