PLC-SW35 - Projector SANYO - Free user manual and instructions
Find the device manual for free PLC-SW35 SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Projector |
| Brand | Sanyo |
| Model | PLC-SW35 |
| Resolution | XGA (1024 x 768) |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Type | UHP Lamp |
| Lamp Life | 3000 hours (Normal Mode) |
| Lens | Manual Zoom/ Focus |
| Keystone Correction | Vertical +/- 30 Degrees |
| Inputs | VGA x1, Composite Video x1, S-Video x1, Audio x1 |
| Outputs | Monitor Out (VGA) x1 |
| Noise Level | 35 dB (Normal Mode) |
| Power Consumption | 270 Watts |
| Dimensions (W x D x H) | 310 x 280 x 100 mm |
| Weight | 3.5 kg |
| Projection Distance | 1.1 - 10.0 m (Diagonal 27-300 inches) |
| Maintenance | Clean Air Filter, Replace Lamp |
| Safety Features | Overheat Protection, Auto Power Off |
| Spare Parts Available | Lamp (Part No. POA-LMP115), Air Filter |
| General | Remote Control Included, Ceiling Mountable |
Frequently Asked Questions - PLC-SW35 SANYO
How do I connect a laptop to the PLC-SW35 projector?
Connect the laptop's VGA or HDMI (if available) output to the projector's VGA input using a compatible cable. Ensure the projector is set to the correct input source via the remote control or menu.
How do I clean the air filter on the Sanyo PLC-SW35?
Turn off the projector and unplug it. Open the filter cover, remove the filter, and gently wash it with water and mild detergent. Let it dry completely before reinstalling. Replace the filter if damaged.
What is the lamp life and how do I replace the lamp?
The lamp lasts about 3000 hours in normal mode. To replace, turn off the projector, wait for it to cool, unscrew the lamp cover, disconnect the lamp connector, and install a new lamp (POA-LMP115). Reattach the cover and reset the lamp timer.
How can I correct a skewed image?
Use the keystone correction function. Press the Keystone button on the remote or access the menu to adjust vertical distortion. Manually adjust the projector's angle or use the front feet to level.
Why is the projector not turning on?
Check if the power cord is securely connected and the outlet is working. Ensure the lamp cover is properly closed and the filter is clean. If the overheating protection is triggered, wait 10 minutes before retrying.
How do I reset the lamp counter after replacement?
After replacing the lamp, press the MENU button, go to the 'Information' or 'Settings' menu, select 'Lamp Time Reset', and confirm. This ensures accurate lamp life monitoring.
What should I do if the image is blurry?
Adjust the focus ring on the lens. Also, check the projection distance and ensure the projector is perpendicular to the screen. Clean the lens with a soft, dry cloth.
Can I use the projector with a ceiling mount?
Yes, the PLC-SW35 is ceiling mountable. Use a compatible mount and invert the image via the 'Ceiling Mount' setting in the menu. Ensure proper ventilation.
What is the maximum projection size?
The projector can display images up to 300 inches diagonal (10m distance). For optimal brightness, keep the size under 150 inches.
How do I clean the projector lens?
Use a soft, lint-free cloth slightly dampened with lens cleaner or water. Gently wipe the lens in a circular motion. Avoid touching the lens with fingers.
User questions about PLC-SW35 SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PLC-SW35 - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-SW35 by SANYO.
USER MANUAL PLC-SW35 SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-SW35
Category : Projector