PLC-XU300A - Projector SANYO - Free user manual and instructions
Find the device manual for free PLC-XU300A SANYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Sanyo PLC-XU300A Projector - Key Features | |
| Product Type | LCD Projector |
| Resolution | XGA (1024 x 768) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lens | Manual Zoom, Manual Focus |
| Light Source | 200W UHP Lamp |
| Lamp Life | 2000 hours (Normal) / 3000 hours (Eco) |
| Inputs | RGB (D-Sub 15 pin) x1, S-Video x1, Composite Video (RCA) x1, Audio (RCA) L/R, RS-232C |
| Outputs | RGB (D-Sub 15 pin) x1 (monitor out), Audio (minijack) x1 |
| Dimensions (W x D x H) | 340 x 270 x 108 mm (13.4 x 10.6 x 4.3 inches) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | 290W (Normal) / 220W (Eco) / 0.4W (Standby) |
| Noise Level | 29 dB (Eco Mode) |
| Keystone Correction | Vertical: ±30 degrees |
| Safety Features | Auto Power Off, Security Lock (Kensington style) |
| Maintenance | Clean air filter every 500 hours; replace lamp as needed |
| Spare Parts | Replacement lamp (model: POA-LMP115), air filter |
| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
Frequently Asked Questions - PLC-XU300A SANYO
How do I connect a laptop to the Sanyo PLC-XU300A?
Connect the laptop's VGA output to the projector's RGB input using a VGA cable. If the laptop does not have a VGA port, use a compatible adapter. Then select the correct input source using the 'Input' button on the remote or projector.
How do I replace the lamp in the PLC-XU300A?
Turn off the projector and unplug it. Wait at least 45 minutes for the lamp to cool. Open the lamp cover on the bottom, remove the old lamp module, and insert a new one (model POA-LMP115). Secure the cover and reset the lamp timer via the menu.
Why is my projector overheating and shutting down?
Check if the air filter is clogged. Clean the filter with a vacuum cleaner. Also ensure ventilation openings are not blocked. If the problem persists, the lamp may be near end of life.
How can I clean the air filter?
Turn off the projector and unplug it. Locate the air filter on the side or bottom, slide it out, and use a vacuum cleaner to remove dust. Reinstall the filter before use. Clean every 500 hours.
What is the maximum projection size?
With a throw ratio of 1.5-1.8:1, the projector can display from 40 to 300 inches diagonal. For a 100-inch screen, place the projector about 3.5 meters away.
How do I adjust keystone correction?
Press the 'Keystone' button on the remote or use the menu. Use the arrow keys to adjust vertical keystone (±30 degrees). For best image quality, place the projector perpendicular to the screen.
The image is blurry. What should I do?
Rotate the focus ring on the lens until the image becomes sharp. If still blurry, adjust the zoom ring for proper size, and ensure the projector is at the correct distance.
Can I use a 3D input?
The PLC-XU300A does not support 3D signals. It is a standard 2D XGA projector.
How do I reset the lamp timer?
After replacing the lamp, go to the 'Setup' menu, select 'Lamp Counter Reset', and confirm. The timer will reset to zero.
What audio connections are available?
The projector has stereo RCA audio inputs (L/R) for video sources and a 3.5mm minijack output for external speakers. It has a built-in 1W mono speaker.
User questions about PLC-XU300A SANYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PLC-XU300A - SANYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLC-XU300A by SANYO.
USER MANUAL PLC-XU300A SANYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANYO
Model : PLC-XU300A
Category : Projector