AMB 857/G - Air Conditioning WHIRLPOOL - Free user manual and instructions
Find the device manual for free AMB 857/G WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Whirlpool |
| Model | AMB 857/G |
| Product Type | Split Air Conditioner |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | 12000 BTU/h (Heat Pump) |
| Power Supply | 220-240V ~ 50Hz |
| Power Consumption (Cooling) | 1100 W |
| Power Consumption (Heating) | 1100 W |
| Energy Efficiency Ratio (EER) | 3.2 W/W |
| Indoor Unit Dimensions (W x H x D) | 750 x 250 x 190 mm |
| Outdoor Unit Dimensions | 700 x 550 x 250 mm |
| Indoor Unit Weight | 8 kg |
| Outdoor Unit Weight | 25 kg |
| Refrigerant | R-32 |
| Noise Level (Indoor) | 25-40 dB(A) |
| Noise Level (Outdoor) | 50 dB(A) |
| Operating Modes | Cool, Heat, Fan, Dehumidify, Auto |
| Fan Speeds | 3 speeds + Auto |
| Timer | 24-hour On/Off timer |
| Remote Control | Yes, with LCD display |
| Filter Type | Washable anti-bacterial filter |
| Self-Diagnosis | Yes, with LED indicators |
| Overheat Protection | Yes |
| Airflow Direction | Vertical horizontal louvre control |
| Installation Type | Wall-mounted indoor unit |
Frequently Asked Questions - AMB 857/G WHIRLPOOL
How do I clean the air filter?
Turn off the unit and open the front panel. Remove the filter and clean it with a vacuum or rinse under lukewarm water. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.
What does error code E1 mean?
Error E1 indicates a problem with the indoor unit temperature sensor. Try resetting the unit by unplugging for 5 minutes. If the error persists, contact a professional technician.
Can I operate the air conditioner without the remote control?
Yes, you can use the manual control button on the indoor unit. It typically cycles through modes (Auto, Cool, Off). For full functionality, use the remote.
How do I set the timer?
Press the Timer button on the remote. Use the +/- buttons to set the desired time for On or Off. Confirm with the Timer button again. The display will show the timer setting.
Why is my air conditioner not cooling?
Check if the thermostat is set correctly. Ensure the filter is clean and the outdoor unit is not blocked by debris. Also, verify that the mode is set to Cool and the set temperature is lower than the room temperature.
How do I switch between cooling and heating?
Press the Mode button on the remote control until you see the desired mode icon (snowflake for cool, sun for heat). The unit will automatically adjust to the selected mode.
What is the recommended temperature setting for energy savings?
For cooling, set the thermostat to 24-26°C (75-78°F). For heating, set to 18-20°C (64-68°F). Each degree above 24°C in summer saves about 6% on energy costs.
How often should I clean the air filter?
Clean the filter every two weeks during heavy use. If the environment is dusty, clean more frequently. A clogged filter reduces efficiency and can cause the unit to freeze.
Is professional installation required for this unit?
Yes, split air conditioners require professional installation. It involves refrigerant line connections, electrical wiring, and proper mounting. Improper installation may void the warranty.
How can I save energy while using the air conditioner?
Use the timer to avoid running the unit when not needed. Close curtains to block sunlight. Use the fan mode occasionally to circulate air. Set the temperature wisely and keep filters clean.
User questions about AMB 857/G WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual AMB 857/G - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMB 857/G by WHIRLPOOL.