AdderLink X-USBPRO - Audio/video extension Adder - Free user manual and instructions
Find the device manual for free AdderLink X-USBPRO Adder in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Extender |
| Brand | Adder |
| Model | AdderLink X-USBPRO |
| Dimensions (approx.) | 120 x 80 x 25 mm |
| Weight (approx.) | 0.2 kg |
| Power Supply | External 5V DC power adapter |
| Input Interface (Transmitter) | USB Type B, VGA (or DVI-I) video input |
| Output Interface (Receiver) | USB Type A, VGA (or DVI-I) video output |
| Extension Medium | Cat5e/6 UTP cable |
| Maximum Distance | Up to 100 m (328 ft) |
| Supported Video Resolutions | Up to 1920 x 1200 (WUXGA) or 1080p |
| USB Support | USB 2.0 (compatible with USB 1.1) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 90% non-condensing |
| Compliance | CE, FCC |
| Maintenance | Wipe with a dry soft cloth. Do not use liquid cleaners. |
| Safety | Do not expose to moisture. Use only supplied power adapter. |
| Spare Parts | Contact Adder support for replacement parts. |
| Repairability | No user-serviceable parts inside. Refer to qualified technician. |
| General Information | 2-year warranty from purchase date. RoHS compliant. |
Frequently Asked Questions - AdderLink X-USBPRO Adder
What is the maximum distance I can extend USB and video signals with the AdderLink X-USBPRO?
The maximum distance is up to 100 meters (328 feet) over standard Cat5e or Cat6 UTP cable. Performance may vary with cable quality and environmental factors.
Can I use this extender with a DVI monitor?
Yes, if your monitor has a DVI-I input, you can use a DVI-to-VGA adapter (not included) to connect to the VGA output of the receiver. Alternatively, the transmitter and receiver may support DVI-I signals directly, but check compatibility with your video source.
Does the AdderLink X-USBPRO support USB 3.0 devices?
No, it supports USB 2.0 and USB 1.1 devices only. USB 3.0 devices will operate at USB 2.0 speeds when connected through this extender.
How do I connect the transmitter and receiver units?
Connect your computer's USB and video outputs to the transmitter unit. Then run a Cat5e/6 cable from the transmitter's RJ45 port to the receiver's RJ45 port. Finally, connect your USB peripherals and monitor to the receiver unit. Power both units with the supplied adapters.
What type of cable is required between the transmitter and receiver?
A straight-through (pin-to-pin) Cat5e or Cat6 UTP cable is required. Shielded (STP) cable is recommended for long runs or noisy environments. Do not use crossover cables or telephone cables.
Can I use the AdderLink X-USBPRO with a KVM switch?
Yes, the extender is compatible with most KVM switches that provide USB and VGA signals. Connect the KVM switch's output to the transmitter input. Note that additional latency may be introduced.
How do I power the extender?
Both the transmitter and receiver units require power. Use the included 5V DC power adapters. Plug each adapter into a mains outlet and connect the barrel jack to the respective unit. The units have power LEDs that should illuminate.
What video resolutions are supported?
The extender supports resolutions up to 1920 x 1200 (WUXGA) at 60 Hz or 1080p at 60 Hz. Lower resolutions are also supported. Ensure your monitor and source are set to a compatible resolution.
Is any software required to use the AdderLink X-USBPRO?
No, the extender is plug-and-play. It does not require any drivers or software. Your operating system should automatically detect the extended USB and video signals.
My video signal is not showing on the remote monitor. What should I check?
First, verify that both the transmitter and receiver are powered (LEDs lit). Check that the Cat5e/6 cable is properly connected and not damaged. Ensure the video source resolution is supported (<=1920x1200). Try a different monitor or cable. If using adapters, ensure they are compatible. Finally, reset the extender by power cycling both units.
User questions about AdderLink X-USBPRO Adder
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual AdderLink X-USBPRO - Adder and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AdderLink X-USBPRO by Adder.
USER MANUAL AdderLink X-USBPRO Adder
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adder
Model : AdderLink X-USBPRO
Category : Audio/video extension