XRN-410S - VCR SAMSUNG - Free user manual and instructions

Find the device manual for free XRN-410S SAMSUNG in PDF.

SAMSUNG XRN-410S - VCR
📄 96 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SAMSUNG XRN-410S - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type VCR (Video Cassette Recorder)
Model XRN-410S
Brand Samsung
Dimensions (W x D x H) 430 x 275 x 95 mm
Weight 4.2 kg
Power Supply AC 220-240V, 50/60 Hz
Power Consumption 18 W
Video Head System 4-head helical scanning
Recording Format VHS (Hi-Fi stereo)
Playback Speed SP, LP, EP (NTSC/PAL)
Audio Hi-Fi stereo, mono linear track
Input/Output Ports RF in/out, AV in/out (RCA), S-Video
Tuner Built-in TV tuner (VHF/UHF)
Timer Recording Programmable via on-screen display
Remote Control Infrared remote included
Maintenance Clean video heads with cleaning cassette; avoid dust
Safety Do not disassemble; keep away from moisture
Spare Parts Availability Belts, heads, capacitors may be sourced online
Reparability Moderate; requires technical skill for mechanical parts
General Information Designed for home use; plays and records VHS tapes

Frequently Asked Questions - XRN-410S SAMSUNG

How do I connect the VCR to my TV?
Connect using RF coaxial cable from the VCR's RF OUT to TV's antenna input, or use AV cables (RCA) for better quality. Set TV to the correct input channel.
Why is the playback picture snowy?
This may be due to dirty video heads. Use a cleaning cassette or open the unit and clean heads manually with alcohol- soaked swabs. Also check cable connections.
How do I set the clock?
Press the MENU button, navigate to CLOCK SET, and use the number buttons to enter the current time and date. Confirm with ENTER.
Can I record from a connected device?
Yes, connect the source device (e.g., cable box) to the AV IN or RF IN of the VCR. Select the correct input source and press REC.
What types of tapes can I use?
This VCR uses VHS tapes. It supports standard T-120 (SP) and T-160 (LP/EP). Avoid damaged tapes to prevent head clogging.
How do I perform a timer recording?
Press MENU, go to TIMER RECORDING, set the start/stop time, date, and recording speed. Ensure the VCR is in standby mode before the scheduled time.
The VCR does not power on. What should I do?
Check the power cord and fuse. Ensure the outlet is working. If still dead, internal power supply failure may require professional repair.
How do I clean the video heads?
Use a dry cleaning cassette for routine cleaning. For stubborn dirt, apply isopropyl alcohol to a lint-free swab and gently rub the drum (heads). Let dry before use.
Is it possible to adjust the tracking?
Yes, use the TRACKING buttons on the remote or front panel to minimize noise lines during playback of third-party tapes.
Where can I find spare parts?
Spare parts like belts, pinch rollers, and heads are available from online retailers or specialized electronics stores. Use the model number XRN-410S when searching.

User questions about XRN-410S SAMSUNG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your VCR in PDF format for free! Find your manual XRN-410S - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XRN-410S by SAMSUNG.

USER MANUAL XRN-410S SAMSUNG

©2017 Henwhe Techwin Co., Ltd. All rights reserved.

Trademark

Each trademark has been registered. The name of this product and other trademarks mentioned in this statement are the registered trademarks of

their respective companies.

Restriction

Copyright of this document is reserved. Under no circumstances shall this document be reproduced, distributed, or changed, partially or wholly.

without authorization.

Disclaimer

Henwhe Techwin makes the best effort to verify the integrity and timeliness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely at the user's own responsibility. Henwhe Techwin reserves the right

Use of this document and the subsequent results shall be entirely on the user's own responsibility. Hanuhe Techuim reserves the right

to change the contents of this document without prior notice.

- Design and specifications are subject to change without prior notice.

The initial administrator ID is "admin" and the password should be set when logging in for the first time.

Please change your password every three months to safely protect personal information and to prevent damage.

information theft.

Please note that it is the user's responsibility for the security and any other problems caused by mismanaging a password.

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAMSUNG XRN-410S - IMPORTANT SAFETY INSTRUCTIONS - 1

Standards Approvals

SAMSUNG XRN-410S - Standards Approvals - 1

SAMSUNG XRN-410S - Standards Approvals - 2

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

BEFORE START

This manual provides operational information necessary for using the product and contains a description about each component part and its function as well as menu or network settings. You have to keep in mind the following notices:

• Hanwha Techwin retains the copyright on this manual. - This manual cannot be copied without Hanwha Techwin's prior written approval.

  • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
  • Prior to opening the case, please consult a qualified technician first. Whenever this is needed, power must be removed from the unit.
  • Before adding a hard disk drive or external storage (USB memory, USB HDD, etc), check if it is compliant with this product. For the compatibility list, contact the retailer.

Warning

Battery

It is essential that when changing the battery in the unit, the replacement battery must be of the same type, otherwise there may be a possibility of an explosion. The following are the specifications of the battery you are using now.

  • Normal voltage: 3V • Normal capacity: 210mAh • Continuous standard load: 0.4mA
  • Operating temperature: -20°C ~ +60°C (-4°F ~ +140°F)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. *Perchlorate Material - special handling may apply, See www.dltc.ca.gov/azardous/gro/a-porchlorate.*

Caution

  • Connect the power cord into a grounded outlet.
  • The Mains plug is used as a disconnect device and shall stay readily operable at any time.
  • Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
  • Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

System Shutdown

Turning off the power while the product is in operation, or undertaking improper actions may cause damage or malfunction to the hard drive or the product. Press on the system shutdown popup window and then remove the power cable to ensure a safe power off. You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

SAMSUNG XRN-410S - System Shutdown - 1

If powered off abnormally, restarting may take more time for restoring data from hard disk drive for proper operation.

Overview

Operating Temperature

The guaranteed operating temperature range of this product is 0°C \~ 40°C (32°F \~ 104°F).

This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one.

Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at room temperature for a period.

Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C \~ 55°C (41°F \~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

Ethernet Port

This equipment is for indoor use, and all communication wiring is limited to inside the building.

Security Precautions

The initial administrator ID is "admin" and the password should be set when logging in for the first time. Please change your password every three months to safely protect personal information and to prevent damage from information theft.

Please note that it is the user's responsibility for security and any other problems caused by mismanaging a password.

CONTENTS

OVERVIEW

SAMSUNG XRN-410S - OVERVIEW - 1

3 Important Safety Instructions 3 Before Start 5 Contents 6 Features 7 Part Names and Functions (Front) 7 Part Names and Functions (Rear) 8 Remote Control

INSTALLATION

SAMSUNG XRN-410S - INSTALLATION - 1

9 Checking the installation environment 9 Rack Installation 9 HDD Addition

CONNECTING WITH OTHER DEVICE

SAMSUNG XRN-410S - CONNECTING WITH OTHER DEVICE - 1

12 Connecting to an external device 12 Connecting the USB 12 Connecting the Alarm Input/Output 13 Connecting the Network

LIVE

SAMSUNG XRN-410S - LIVE - 1

14 Getting Started

15 Live Screen Configuration 18 Live Screen Mode 21 Zoom 21 Layout 22 Audio ON/OFF 22 Freeze 22 Event Monitoring 22 Capture 23 Maintain the Screen Ratio 23 Display Text 23 PTZ control 25 Backup

SAMSUNG XRN-410S - MENU SETUP - 1

26 System Setup 31 Setting the Device 40 Setting the Recording 42 Setting the Event 44 Network Configuration

SEARCH & PLAY

SAMSUNG XRN-410S - SEARCH & PLAY - 1

51 Search 54 Playback

STARTING WEB VIEWER

SAMSUNG XRN-410S - STARTING WEB VIEWER - 1

55 What is Web Viewer? 55 Connecting Web Viewer

LIVE VIEWER

SAMSUNG XRN-410S - LIVE VIEWER - 1

57 Live Viewer 58 Live Screen Configuration 61 Controlling a Connected Network Camera

SEARCH VIEWER

SAMSUNG XRN-410S - SEARCH VIEWER - 1

63 Search Viewer

SETUP VIEWER

SAMSUNG XRN-410S - SETUP VIEWER - 1

66 Setup Viewer

BACKUP VIEWER

SAMSUNG XRN-410S - BACKUP VIEWER - 1

75 SEC Backup Viewer

APPENDIX

SAMSUNG XRN-410S - APPENDIX - 1

77 Product Specification

79 Product Overview 80 Default Setting 82 Troubleshooting 85 Open Source License Report on the Product

Overview

Features

The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer.

  • User-friendly UI • Supports a range of 4K camera resolutions (4096X2160) • Outputs a 4K high definition image using HDMI
  • Record and play video
  • Record and play audio • Supports ONVIF Profile S standard and RTP / RTSP protocols • Display the HDD operation status by HDD SMART
  • HDD overwrite enabled
  • Backup using USB 2.0, 3.0 protocols and external HDD • Simultaneous play of 4, 8 channels
  • Various Search Modes (Time, Event, Smart, Text, Backup, ARB) • ARB support (configuration feature for saving period by channel)
  • Various Recording Modes (Normal, Event, Scheduled Recording)
  • Alarm Input / Output • Remote Monitoring function by Windows Network Viewer • Live monitoring of the network camera • Installation Wizard Function (Easy Setup, Quick Setup) • Supports the smartphone remote monitoring feature by P2P support
  • Provides smartphone event alarm (sending real-time event messages)

Package Contents

Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit.

Accessory category and quantity may differ depending on sales region.

XRN-410SMVR Mouse, Power Cable, Power Adapter, User Manual CD, User Manual or Quick Manual, Terminal Block, HDD Fixing Screw (for models having no installed HDD), SATA Cable (for models having no installed HDD)

XRN-810SNVR Mouse, Power Cable, Network Viewer Software / User Manual CD, User Manual or Quick Manual, Terminal Block, Remote Control / Remote Control Battery (AA), Bracket: track Bracket Fixing Screw

PART NAMES AND FUNCTIONS (FRONT)

XRN-410SUHD 1 2 3

XRN-810SUHD 3 2 1

Part Names Functions
1USBConnects the USB devices. (USB 2.0 supported)
2Remote Reception SystemReceive the signal from the remote control.
3LED IndicatorREC: Lights on when recording is in progress.
HDD: Displays the normal access to HDD.LED turns on when accessing the hard disk. (XRN-B1OS)
ALARM: Lights on when an event occurs. (XRN-B1OS)
NETWORK (LAN): Displays both network connection and data transfer status.
BACKUP: Stays ON when backup is in operation. (XRN-B1OS)
POWER: Shows the power ON/OFF status.

PART NAMES AND FUNCTIONS (REAR)

XRN-410SDiagram of network device rear panel with labeled ports and connectors

XRN-810S8 4 5 3 6 2 7 1 9 10

Part Names Functions
1ALARM- ALARM IN - Alarm input ports(1~4 CI) - NBRM OUT : Alarm output ports. XRN-11CS : 1~2 CH XRN-B1OS : 1~3 CH
2AUDIO OUTAudio Signal Output Port (RCA joc).
3Ground connectionTerminal to connect a separate ground cable. ■ Add a ground cable to support the safe use of the device.
4VIEWERPort recommended for connection with a network, web viewer.
5VGA OUTVSA Video Signal Output Port.
6HDMIHDMI connector port.
7USBConnects the USB devices. (USB 3.0 supported)
8PoE (CAMERA)Power supply port to connect to a camera.
9PowerTerminal to connect power to.
10Power SwitchPower or/it switch.

Overview

REMOTE CONTROL

POWER: Displays the full power screen. NUMBER (0-9): Used as numeric input or to display a simple channel. PTZ: Displays on screen. TAW: Zooms in or out. SEARCH: Displays the search menu. MODE: Changes the action mode. MENU: Displays the next search menu. PRESET: Displays the next panel. FREEZE: Fra…

Using the Numeric buttons

  1. Select a number between 1 and 8.
  2. Move to the selected channel number.

Changing the Remote Control ID

The remote control's ID and the NVR's ID must match for proper operation.

  1. Press the ID button on the remote control and check the ID displayed on the NVR screen. The factory default ID for the remote control is 00.
  2. While holding down the [ID] button on the remote control, enter the two digits of your desired ID in sequence.
  3. Once the ID has been entered, press the [ID] button on the remote control again to confirm the setting.

- To change the remote control ID to 08: While pressing the [ID] button on the remote control, press 0 and then 8. For instructions on changing the ID of remote devices, refer to "Remote Devices" (page 35).

Installation

Please note the following before using this product.

  • Do not use the product outdoors.
  • Do not spill water or any liquid on the connection parts of the product.
  • Do not subject the system to excessive shock or force.
  • Do not pull the power plug out forcefully.
  • Do not disassemble the product yourself.
  • Do not exceed the rated input/output range.
  • Use only a certified power cord.
  • For products with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

This product is a top-notch security device that is equipped with a high-capacity HDD and other key circuit boards.

Note that an excessive internal temperature of the product may cause a system failure or a shortened product life (see the right figure). Keep in mind the following instructions before installing the product.

Temperature Unit: ℃| X-Axis | Y-Axis | |---|---| | 2,000 | 111 | | 8,000 | 100 | | 16,000 | 91 | | 30,000 | 82 | | 50,000 | 73 | | 100,000 | 64 | | 150,000 | 55 |

Life [Figure 1]

When mounting the product on a rack, comply with the following instructions.

  1. Please ensure that the rack inside is not sealed.
  2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.
  3. If you pile up the products or other rack-mount devices as shown in figure 2, secure room for ventilation or install a vent.
  4. For natural air convection, place the inlet at the bottom of the rack and the outlet on top.
  5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for air circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)
  6. Please maintain the temperature inside the rack or surrounding areas between 0°C - 40°C (32°F - 104°F) as shown in the figure 1.

Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions :

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tms) specified by the manufacturer. B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

SAMSUNG XRN-410S - CHECKING THE INSTALLATION ENVIRONMENT - 2

[Figure 2]SAMSUNG XRN-410S - CHECKING THE INSTALLATION ENVIRONMENT - 3

RACK INSTALLATION

Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides.

- Fix the screws so they do not loosen due to vibrations.

Pure technical line drawing of a rectangular component with internal channels and mounting brackets (no text or symbols)

HDD ADDITION

Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury, or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product.

■ Number of HDDs supported : XRN-410S : Max. 1 XRN-810S : Max. 2

- Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

SAMSUNG XRN-410S - HDD ADDITION - 1

■ Cautions for data loss (HDD care)

Please pay attention so that the data inside the HDD is not damaged.

Before adding a HDD, please check the compatibility with this product.

HDD is vulnerable to malfunction due to its sensitive nature, especially against shock when operating. Please ensure that the HDD is free from such shock.

We are not liable for any damage to the HDD incurred by user's carelessness or misuse.

■ Cases might cause damage to HDD or recorded data

To minimize the risk of data loss from a damaged HDD, please backup data as often as possible. If exposed to shock when disassembling or installing, data stored in the hard disk may be damaged. A sudden power failure or turning off the product while in HDD operation may damage the hard disk drive. HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.

Cautions when installing a HDD

  1. Do not apply excessive force to the HDD.
  2. Pay attention so as not to lose the disassembly screws or accessories.

- If the screws or accessories are not put together correctly, the product may break down or not operate properly.

  1. Please check the HDD compatibility before adding a HDD.
  2. Please contact your nearest dealer to obtain the list of compatible devices.

Installation

Installing the HDD

SAMSUNG XRN-410S - Installing the HDD - 1

- If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. For information on how to format an HDD, refer to "Device/Format" (page 37)

How to install an HDD in XRN-410S

  1. After unscrewing, push back and remove the cover.

Isometric line drawing of a rectangular electronic device with a black arrow pointing to its top surface (no text or symbols)

  1. Connect the SATA/power cables of the HDD to the connectors on the mainboard.

Isometric line drawing of a device with labeled components and an arrow indicating direction (no text or symbols present)

  1. Using the screws, fix the HDD to the bottom of the set.

Isometric line drawing of a metal bracket with mounting holes and mounting points (no text or symbols)

  1. Check for any problems in the connection terminal and the wiring in the product, close the cover and fix it with screws.

Line drawing of a computer drive chassis with ports and connectors (no text or symbols)

  1. Close the cover, and tighten a setscrew in the back.

Line drawing of a device with an internal circuit board and indicator lights (no text or symbols)

How to install an HDD in XRN-810S

  1. After unscrewing, push back and remove the cover.

Isometric line drawing of a rectangular electronic device with a central slot and an arrow indicating direction (no text or symbols)

  1. Separate them by unscrewing the fixed bracket screw and push it towards the arrow on the board.

Line drawing of a computer motherboard with hands operating the socket (no text or symbols visible)

  1. After aligning and inserting one side of the HDD to the bracket, open the other side bracket wide and insert the HDD between them.

- Align a hole in the bracket with a screw hole in the HDD to fix them.

Line drawing of two hands exchanging a rectangular object with a black arrow pointing to it.

  1. Push the bracket with the HDD installed and tighten the screws to fix it.

Line drawing of hands operating a CD or DVD drive.

  1. Close the cover and tighten the screws to fix it.

Isometric line drawing of a rectangular electronic device with a black arrow indicating direction.

Connecting with other device

CONNECTING TO AN EXTERNAL DEVICE

- The following figures are based on Model XRN-810S.

Labels: VIDEO OUT, 0500, HDMI OUT, AUDIO OUT.

- Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source before pressing the POWER button.

CONNECTING THE USB

  1. On the front of the product, there is a USB port.
  2. You can connect a USB HDD, USB memory or mouse to the USB port.
  3. If a USB HDD is connected to the system, recognition and settings are available in "Menu > Device > Storage Device". (Page 37)
  4. The product supports hot plugging function that enables connecting/disconnecting USB devices while in operating the system.

If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the NVR.

  • Some USB devices may fail to function properly due to compatibility issues, please check the device before using.
  • Only USB storage devices that comply with the standards (having a metal cover) are guaranteed for data transfer. In case the USB device's electric contacts have been worn out, data transfer between the devices may not function properly.

SAMSUNG XRN-410S - CONNECTING THE USB - 1

SAMSUNG XRN-410S - CONNECTING THE USB - 2

12_ connecting with other device

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.

graph TD A["User Interface"] --> B["Sensor 1"] A --> C["Sensor 2"] A --> D["Sensor 3"] A --> E["Sensor 4"] A --> F["Sensor 5"] A --> G["Sensor 6"] A --> H["Sensor 7"] A --> I["Sensor 8"] A --> J["Sensor 9"] A --> K["Sensor 10"] A --> L["Sensor 11"] A --> M["Sensor 12"] A --> N["Sensor 13"] A --> O["…

• ALARM IN 1-4 : Alarm Input Port • ALARM OUT 1 - 3 : Alarm Output Port

ALARM IN (5mA sink)SAMSUNG XRN-410S - CONNECTING THE ALARM INPUT/OUTPUT - 2

ALARM OUT (30VDC 2A, 125VAC 0.5A MAX)SAMSUNG XRN-410S - CONNECTING THE ALARM INPUT/OUTPUT - 3

CONNECTING THE NETWORK

SAMSUNG XRN-410S - CONNECTING THE NETWORK - 1

- For more information about network connection, refer to "Network Configuration". (Page 44)

Network connection via Ethernet (10/100/1000BaseT)

Labels: Windows, Switch, Windows Network Viewer.

Network connection via router

graph TD A["Server"] --> B["Brochband router"] B --> C["xDSL or Cable Modem"] C --> D["NETWORK"] D --> E["ODNS Server (Data Center)"] D --> F["XDSL or Cable Modem"] F --> G["Windows Network Viewer"]

Connecting to Internet through PPPoE

graph TD A["Network"] --> B["PPP&E NOISEM"] B --> C["Phand(PPP&E) Line"] C --> D["Switch"] D --> E["Windows Network Viewer"] E --> F["PC"]

Connecting the network camera

PnP mode

Text: exj IP : 192.168.231.100, Network Camera, exj IP : 192.168.231.10.

Manual mode

graph TD A["ex"]IP:192.168.1.100 --> B["Switch"] B --> C["Network Camera"] B --> D["Network Camera"] B --> E["Network Camera"] B --> F["Network Camera"] B --> G["Network Camera"] B --> H["Network Camera"] B --> I["Network Camera"] style A fill:#f9f,stroke:#333 style B fill:#ccf,stroke:#333 style C f…

English_13

GETTING STARTED

Starting the system

  1. Connect the power cable of the NVR to the wall outlet.
  2. You will see the initialization screen. The initialization process will last about 2 minutes. If a new HDD is installed, the initialization process may take longer.
  3. The live screen appears with a beep.

Text: SAMSUNG, WISENET.

Install Wizard

As shown below, proceed through each step of the .

  1. In the screen, select the language and press the button.
  2. In the screen, set the password and press .

- Setting Camera Password

You can change the password of the camera on bloc if the camera password is in a factory reset state.

If the camera password is not in a factory reset state, please enter the password of the current camera to register the camera.

- New Password: Input a new password according to the password setting rules.

- Confirm Password: Input the new password again.

A camera password registered with OMIF and RTSP cannot be changed.

- Password setting guide

When you click < ☐ >, a basic guide for setting a password is displayed. Check the password setting rules.

  1. In the screen, set the network access method and the access environment. To use a simple intranet, click .
  2. DHCP server: If the DHCP server is set to enable, an IP is automatically assigned to the camera. For more information, please refer to "DHCP Server" in the menu settings. (Page 49) • Network 1 (Camera): Connects to the camera and receives the video feed from the camera • Network 2 (All): This is a port for transmitting an image to the webviewer. • Network 1 / Network 2 Setup

- IP Type: Choose the network connection method

- IP Address, Subnet Mask, Gateway, DNS

- If the LAN cable is not connected to the port, the setting button will not be activated for use. Check the LAN cable connection.

  • The built-in DHCP Server in NWR will turn on automatically at stage 3. At this stage, using the existing DHCP server in the same network may cause a problem as two DHCP servers would be simultaneously operating.
  • For more details on network settings, refer to the user manual.
  • After setting the date/time settings in the screen, click on the button to launch the setting completion window.
  • In the setting completion window, click the button to finish camera setup and launch the camera registration screen.

Repeated text: Start.

  1. If there are 8 or fewer cameras found, they will be automatically registered, and the camera information (fps, days of recording) will be displayed.
  2. If there are 8 or fewer cameras found

SAMSUNG XRN-410S - - Password setting guide - 2

  1. The found cameras will be automatically registered, and the initial recording values will be displayed. • If there are more than 8 cameras found

SAMSUNG XRN-410S - - Password setting guide - 3

  1. In the camera registration window, click the button to modify the automatically set recording settings.

Screenshot of a file explorer window with repeated menu items and paths.

Select a camera to register and click the button. Once camera registration is complete, proceed with the same steps as after auto-registration.

Shutting Down the System

  1. Press the [POWER] button on your remote control or select it from the live screen menu.
  2. The "Shutdown" confirmation pop-up window will appear.
  3. Using the directional buttons on your remote control, select and press the [ENTER] button, or click on . The system will shut down.

- Only users with the 'shutdown' permission can shut down the system.

- For permission management, refer to 'User > Setting Permissions'. (Page 28)

Collage of surveillance cameras and camera feeds with visible text labels such as 'CATA' and 'DAR'.

Login

To use the NVR menu, you must log in as a user authorized to access the applicable menu.

  1. In the live mode screen, right-click the mouse or press the [MENU] button on your remote control. You will see the context menu on the screen as shown.
  2. Select . The login dialog appears.

Even if you press the menu button that requires a login with the remote control, the login screen will appear.

  • The initial administrator ID is set to "admin" and you will need to configure the password in the installation wizard.
  • Please change your password every three months to satisfy protect personal information and to prevent the damage of the information theft. Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.

For the restricted permission, refer to 'User > Setting Permissions'. (Page 25)

Collage of surveillance camera feeds showing room views, navigation, and security camera setup with visible text overlays.

Icons on the Live Screen

You can check the status or operation of the NVR with the icons on the live screen.

Numbers 4, 5, 6, 7, 1, 2, 3, and timestamps 2018-07-01 08:00:01, COM-01, COM-01.

Name Description
1Current Date, TimeDisplays the current time and date.
2Login InformationWhen you are logged in, the "LOG ON" icon will be displayed.
3Screen ModeIt is displayed when there is ongoing backup in the live condition.
If access to the recording canceling menu is restricted, then it is only displayed when there is ongoing manual recording.Only a user with the right to cancel recording can do so.
It is displayed when the magnifying function is in operation.
This icon is displayed when you press the Frouze button.
It is displayed when all the channels are switched at the set time interval.
4System OperationIt is displayed when the recording data cannot be received properly due to a device problem.
Displayed if the HDD is full and the KVR has an insufficient space to record.
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD needs a technical examination.

SAMSUNG XRN-410S - Icons on the Live Screen - 2

Name Description
4System OperationIt is displayed when the max permitted amount of data for each channel is exceeded.
It is displayed when the network is overloaded.It occurs when the max receiving allowance is exceeded, causing an overload to the CPU. It will disappear if you modify the camera settings or delete a camera to reduce the performance button.
It is displayed when there is firmware to update the server.
5Video Input StatusDisplayed if no input is entered in the condition that the camera is set to.
Displayed when the live image with the camera turnedexceeds the supported resolution.
WISENetDisplayed if no permission to live view is granted.
If a camera isor it no camera is registered, or it is mode, nothing will be displayed on the screen.If the camera is set to, the video will be displayed but the OSD menus will not be displayed.
6Camera Title / ChannelDisplay the camera title and channel number.
7Camera OperationThis icon is displayed for a channel that a PTZ-featuring camera is connected to.
Displays AUDIO ON/MUTE. Not displayed in video mode if deceased.
If the sensor is set to, the input signal will be displayed on the screen of the connected channel.
This icon is displayed when Motion Detection is set toand a camera motion or camera event occurs.
®/®/®It displays the status of general/event/scheduled recording.
It is displayed when it fails to decode all the frames due to limited decoding performance and in this case only the I-Frame is decoled.
This is displayed when a POS (exit) event occurs.
RED - Displayed when there is any abnormality in the PED-SD card.YELLOW - Displayed when there is no storage space in the SD card.
Simple focus starts when clicking on the corresponding icon.When the focus event occurs, the light clicks from the camera. When the corresponding icon is clicked, the simple focus command is sent to the camera.Only available on the camera which has focus detection function.

Error Information

- If the built-in HDD is not connected, the "NO HDD" icon (☐) will be displayed in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.

If you see the NO HDD ( ), HCD FAIL ( ) icons on the screen, contact the service center for more details.

Live Screen Menu

Beside the functional buttons for your remote control. In the live screen mode, you can right click with the mouse button or press the [MENU] button on your remote control to launch the live screen menu from where you can access each menu from.

The context menu differs depending on the state of Log in/out, split mode, and NVR operation status.

- Depending on the user permissions, you may have limited access to menu items of Live View. Backup, Stop Recording, Search, PTZ, Female Alarm Output, and Exit.

Single Mode Menu

The single mode menu is available only in Single Mode. If the menu is displayed as in the single screen, it is displayed as a menu where only one channel is selected in the split screen.

Text: 2016-05-01 01:10:25 PM, Open, High, Open/High repeated.

Screenshot of a surveillance camera interface with labeled UI elements and a dropdown menu open for image analysis.

< Single Mode Menu > < One channel selection menu in the split screen >

Menu Description
1Full ScreenSelect and click a desired channel in Split mode to switch to the full screen of the selected channel.
2PTZ ControlAccesses the PTZ Control menu. The PTZ menu will be active on the Live screen after you select a single channel. (Page 23)
3ZOOMYou can enlarge the selected screen. (Page 21)
4Capture Captures the screen of the selected channel. (Page 22)

Split Mode Menu

In Live split mode, right-click to display this context menu as shown.

The context sensitive menu in split mode differs, depending on the login/logout status.

Cropped image showing numbered lanes of a room with a context menu open, alongside a photo of a building interior.

Menu Description
1Screen ModeSelect a screen mode for the Live screen.Refer to "Live screen mode" (Page 18)
2LayoutSet the layout of each channel.Refer to "Layout" (Page 25)
3Keep full scr ratio/Keep ch. scr ratioChannel screen ratio is changed.Refer to "Maintain the Screen Ratio" (Page 23)
4StatusShows the connection information of camera connected to each channel as well as live and recording status.Rotor to "Status" (Page 19)
5Audio On/OffTurns ON/MUTE the sound of the selected channel.Refer to "Audio ON/OFF" (Page 22)
6FreezeStop playing the video temporarily. Refer to "Freeze" (Page 22)
7Stop AlarmStop the alarm output, deactivate the event icon and release the auto sequencing.Refer to "Event Monitoring" (Page 22)
8Record/Stop Starts/stopsthe standard recording.
9PlayRefer to "Search & Play > Play" (Page 54)
10SearchRefer to "Search & Play > Search" (Page 51)
11BackupSearches for a backup device and runs backup for each channel or schedule backup later at a more preferable time. (Page 25)
Menu Description
12MenuEnter the main menu. Refer to the menu settings. (Page 26)
13Quick SetupThe "Camera Register" & "Recording Setup" screen will immediately appear.
14ShutdownThe system shutdown dialog will appear.
15Login/Logout You can log in or out.
16Show/Hide LauncherShows or hides the launcher. Refer to "View the Launcher Menu". (page 16)

SAMSUNG XRN-410S - Split Mode Menu - 2

View the Launcher Menu

The Launcher menu appears on the bottom of the live screen.

  1. Select in the context menu of the Live screen.
  2. Move the cursor to the bottom and click a desired item in the Launcher menu.

SAMSUNG XRN-410S - View the Launcher Menu - 1

*The Launcher menu can be accessed only by using the mouse.

- XRN-410S only supports full screen, 2/3/4-split screen, and automatic switchover screen.

Layout 01 1 2 3 4 5 6 7 8 9 10 11 12 13

Menu Description
1Layout Select the layout to be displayed on the screen.
2Layout Setup You can set, change or delete the new layout of each channel.
3Screen ModeDisplays a list of split modes available in a bar type.The current screen mode will be displayed gray.
4Menu Expansion ButtonClick to display the hidden menu to the right.
5BackupSearches for a backup device and runs backup of each channel or schedule it for later at a more desirable time.
6Zoom Enlarges the selected area. This is available only in Single Live mode.
7PTZIf the network camera connected to the selected channel supports the PTZ operations, this will run the PTZ control launcher. This is active only in Live single mode.
8Alarm Stops the alarm if it's activated.
9Freeze Freezes the Live screen temporarily.
10Capture Captures the screen of the selected channel.
11Text Text output is ON or OFF.
12PlayEnlers Play mode if a file to play exist, and if no, enters Search mode.
13RecordStart/End recording the Live screen.

LIVE SCREEN MODE

You can play up to 8 live video channels in single, 6 type-split, or auto sequence mode.

SAMSUNG XRN-410S - LIVE SCREEN MODE - 1

- When you register a camera, the Live-WAR profile is created to set H.264 800*600 30fps as default. If necessary, you can change it in Menu > Device > Camera > Camera Settings. If the performance is exceeded, it may play frame only. If you cannot create an additional profile for the camera specifications, then sometimes you cannot create Live-WAR. In this case, you need to modify the camera profile. Refer to "Camera Setting". (Page 34)

Method for displaying screen mode

If you want to change the split mode, select a screen mode suggested in the launcher menu or right click with the mouse button and select a split mode in the screen mode menu.

Press the [MODE] button on your remote controller to change it in the order suggested in the launcher menu.

SAMSUNG XRN-410S - Method for displaying screen mode - 1

- XRN-410S only supports full screen, 2/3/4-split screen, and automatic swillover screen.

9-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 2

4-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 3

3-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 4

2-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 5

6-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 6

8-split modeSAMSUNG XRN-410S - Method for displaying screen mode - 7

Auto SequenceSAMSUNG XRN-410S - Method for displaying screen mode - 8

Single modeSAMSUNG XRN-410S - Method for displaying screen mode - 9

Switching the split mode

You can also play 8 Live channels in the sequence of: Single, 4-split mode.

Press the button in the launcher or use the right menu to

automatically switch the screen,

Mouse right button menu → Screen mode → Auto switching mode

If you reach the end of the steps as outlined on the previous page, you will be moved to the first page and no automatic switching will be performed.

Screenshot of a video editing software interface showing a context menu with options like 'Movie', 'Sound, Noise', and 'Audio'.

Auto SequenceSAMSUNG XRN-410S - Switching the split mode - 2

SAMSUNG XRN-410S - Switching the split mode - 3

SAMSUNG XRN-410S - Switching the split mode - 4

  • In split mode, if you have set "Setting the Device > Monitor", Auto Sequence will be conducted at the set interval. (Page 36)
  • When you switch the channel, the video may be delayed depending on the network condition.

Manual Switching

Press the left/right button on the front panel or the remote control, or click the arrow <◀/▶> key to move to the next split mode.

- If pressing the right [▶] button in 4-split mode: 4-split (CH 1~4) mode → 4-split (CH 5~8) mode → Auto Sequence

graph LR A["Start Box"] --> B["Step 1"] B --> C["Step 2"] C --> D["Step 3"] D --> E["End Box"] style A fill:#f9f,stroke:#333 style B fill:#ccf,stroke:#333 style C fill:#cfc,stroke:#333 style D fill:#fcc,stroke:#333 style E fill:#ffc,stroke:#333

Status

You can check the connection information of the camera to be connected to each channel on the live screen.

Channel information

Select the in the live screen menu to check the status of camera connection to each channel.

Connection Not used Recording Connected Connection Error Close

Live Status

If you select in the menu on the live screen, you can check the transmission information and state of the camera connected to each channel.

  • Model: Displays the camera model name connected to each channel.
  • Status: Displays the status of camera connection set to each channel.
  • IP Address: Displays the IP address of a camera set to each channel.
  • Codec: Displays the live profile codec information for a camera set to each channel.
  • Resolution: Displays the live profile resolution of a camera set to each channel.
  • Frame Rate: Displays the live profile transmission rate for a camera set to each channel.

Line Status Name Status Date Duration Finish Date 1 YEAR-2014 Year-2015 2015/12/26 2 YEAR-2014 Year-2015 2015/12/26 3 YEAR-2014 Year-2015 2015/12/26 4 YEAR-2014 Year-2015 2015/12/26 5 YEAR-2014 Year-2015 2015/12/26 6 YEAR-2014 Year-2015 2015/12/26 7 YEAR-2014 Year-2015 2015/12/26 8 YEAR-2014 Year-20…

SAMSUNG XRN-410S - Live Status - 2

Record Status

If you select under the menu on the live screen, you can check a channel's video type, recording type, number of input/recording frames, allowed/input/recording data volume.

  • Total Bitrate (Record/Max): Record bitrate shows the amount of actual data recording while Total bitrate shows the maximum data transfer allowed by the NVR. • Profile: Shows the video profile configured to each channel.
  • Frame (fps): Show the input/record frames per second for each channel.
  • Bitrate (bos)

- Limit / Input / Record: Shows the amount of limit/input/recording data for each channel.

Rearl Status: Status: 100% OK (repeated multiple times). Success to: Back to: (repeated), Return to: (repeated), Run Out (repeated).

  • Input / Limit: Shows the data ratio of actual data transferred from the camera and allowed maximum defined by user.
  • Current: Shows the recording status information of currently transferred data.

- MAX: Shows recording information of the most biggest recording data out of configured standard and event recordings.

•: Reloads the recording information. - Record Setup: The menu screen will switch to the record setting screen.

The warning message at the bottom of the list means that the RVR replaced the selected recording profile with another available profile, since the selected one does not produce video data, which prohibits screen saving. If the screen displays video, it automatically resets to the selected profile and its name turns yellow in the list.

  • If Key Frame recording exceeds the allowed data amount specified by the limit bitrate, a popup alert and loan appear on the screen. The limited recording alert popup does not repeat after displaying once unless camera or recording settings are changed; it may appear again if settings were changed to notify such status.

If you want to set the alert popup not to appear, change your setting to not display a message popup. For further information on bitrate limit of recording data, refer to "Record Setting" (Page 41).

PoE Status

When is selected in the menu of the live screen, the PoE status in each port can be determined.

  1. Select the .

The PoE status view window is displayed. - Consumption(W): Displays the power consumption in PoE. - 0: No device is connected to the port or a device is using its own power supply. --: Trouble in the port (More detailed trouble information can be displayed in additional information.)

Overall PoE power specifications are as follows: XFN-810S (8 ports) is 100W, and XFN-410S (4 ports) is 50W. If a single port exceeds

PUE Status: Pin 1 through Pin 99, Pin100.

36W, or the power to all ports exceeds the overall PoE power specifications, the power to ports will be shut off sequentially.

  • PoE: Turns on/off the power supply to the camera. If checked, it means the power supply is On; if not checked, it means it is Off. • Additional information: If there is a problem in the power supply, it is explained here. Power supply problems include excessive power (class 1 to 4) and voltage errors. • Total PoE power consumption: Display the sum of power consumption for all the ports.
  • Press to move to the previous screen.

Channel Setting

You can display the channel in a desired area of a split screen.

  1. Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen.
  2. Click a camera name to display a channel list where you can select a different channel.
  3. Select a desired channel and click it.

The current channel will be switched to the selected one.

Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also change the channel position.

■ Ex: if switching CH 1 to CH 7

(H203)
(H283)
(H768)WISSEN?

Switching to Single Mode

When in split mode, select and double-click a desired channel to switch to its Single mode.

Press the channel number button on the remote control to switch to single screen.

Refer to "Remote Controller > Using the Number Button". (Page 8)

Ex: With your mouse, double click on channel 3 or press the number 3 on the remote control.

MABUT

ZOOM

This is activated only in Live Single mode.

After selecting a single screen, if you use the Magnify function, the selected area will be magnified by 3.

  1. In the live screen menu, select Press the IZOOMI button on your remote control or click < + on the launcher menu. The Magnify icon in the middle of the screen will be displayed.
  2. You can use the remote control's directional key (▲▼◄►) or drag with the mouse to set the area of magnification.
  3. Press the [ENTER] button or double click with the mouse to magnify the selected area by 3 times.
  4. In the magnified screen, you can drag with the mouse or use the remote control's navigational key (▲▼◀▶) to move the magnified area.
  5. In the live screen menu, select . Press the [ZOOM] button on your remote control or click < Θ> on the launcher menu to cancel the magnification function.

Interior view of a parking garage with several cars parked in the background (no visible text or signage).

Side view of a white pickup truck parked indoors (no visible text or symbols).

LAYOUT

In the live screen, you can set the layout for each channel.

Setting Up the Live Layout

This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

Example1 Layout "Lobby" - Lobby camera 1, Lobby camera 2, Front entrance camera 2 Layout "VIP" - Directors' meeting room 1, Directors' meeting room 2, Directors' lounge 1, Corridor camera on the 7th floor

Security camera module screenshot showing multiple surveillance feeds with labeled components and a control panel with icons.

SAMSUNG XRN-410S - Setting Up the Live Layout - 2

Four-panel surveillance camera photo showing indoor scenes with vehicles and doors, no visible text or symbols.

To create a new layout, follow these steps:

① Open the channel layout setup menu. 2 Click 3 Enter a name for the selected channels (e.g., PARKING). 4 Select the channels that you want to add to the layout (e.g., 1, 2, 3, 4). 5 Choose a split mode to apply (e.g., 4-way split). 6 Click . 7) Choose a layout to view it on the screen (e.g., change to PARKING).

  1. Select the < 16>

The layout setting screen will appear.

  • New: You can set the new layout.
  • Rename: You can make changes to the selected layout. When the layout is changed, the channel order is initialized.
  • Delete: You can delete the selected layout.
  • Channel Table: You can select channels in the table to be registered in, or removed from the layout.
  • Channel List: You can select channels in the list to be registered in, or removed from the layout.
  • Press the button and enter the name of layout to add.
  • In the or , click and select the channel to be displayed on the layout screen.
  • Click on to save the selected layout.

SAMSUNG XRN-410S - Setting Up the Live Layout - 4

- The layout for each user is saved separately.

AUDIO ON/OFF

You can turn the sound on/off corresponding to the channel in Live mode.

AUDIO ON/OFF in Single mode

In the screen, click on the audio icon (☐) or in the remote control, press the [AUDIO] button to turn it on/off.

SAMSUNG XRN-410S - AUDIO ON/OFF in Single mode - 1

- If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network camera supports the sound signal and if you have configured the sound settings as appropriate. The sound icon can be displayed if the sound signal fails to output from noise.

- Only the channel set in "Setting the Device > Camera" displays the audio icon (☐) in Live mode, which you can use to turn the sound on/off.

FREEZE

This is available only in Live mode; it temporarily pauses the Live image.

  1. Press the [FREEZE] button on your remote control or click < 📄> in launcher mode. Video playing is paused.
  2. Press the [FREEZE] button on your remote control or click < 📄> in launcher mode. Pause is canceled. Playing is resumed.

EVENT MONITORING

This displays the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In "Monitor > Event Display", set the event monitoring to ON/OFF and specify the event display time. (Page 39)

  • If multiple events occur simultaneously, the screen switches to a split mode. - 2-4 events: 4-split mode
  • 5-9 events: 9-split mode

- If the second event occurs within the set time of the first event, the first event will last until the second one is terminated.

Ex: If you set to 5 seconds, and only one event occurs in CH 1.

Event occurrence 5 secondsStop alarm CH

Ex: If you set to 5 seconds, and the second event occurs in CH 2 within the set time after the first event occurred in CH 1.

Event occurrence 4 seconds 9 secondsgraph TD A["Start"] --> B{Step 1} B --> C["Stop alarm"] B --> D["Stop alarm"]

SAMSUNG XRN-410S - EVENT MONITORING - 3

  • Press the [ALARM] button or select to initialize the alarm output status and cancel the event function.
  • If an alarm is output with the pre-event and post-event times specified together with the event recording settings, the event recording will perform according to the specified recording type (pre event or post event).

SAMSUNG XRN-410S - EVENT MONITORING - 4

  • In case of continuous events such as motion detection, switching to another split mode display may not be immediate if concatenating events follow, even when you stopped alarm of the event.
  • The video may be delayed depending on the network condition. The event output can be delayed as the transfer of the alarm event from the network camera takes time.

CAPTURE

You can capture a screen selected on the live screen.

Function to perform in single channel mode on the live screen or when selecting a channel.

SAMSUNG XRN-410S - CAPTURE - 1

  1. Select from the live screen menu. You can click on < in the launcher menu.
  2. Select the output information to be displayed on the captured screen.

- When you select the check box, a window to enter a description is opened and you can enter up to 50 Korean letters.

  1. Select a device to save a captured file, file path and file name.
  2. Complete the settings and click , then the image captured from the screen is saved to the selected device.

The screen ratio for a live video can be changed.

Maintain a screen ratio for all channels

Video screen ratio for all channels can be changed in live split screen mode.

  1. Select from the live screen menu. The screen ratio for all channels will be changed.
  2. If you want to go back to the previous screen ratio, check the menu option for

Street photo sequence showing a vehicle detection interface with menu options and navigation arrows.

Maintain a channel screen ratio

If you select a channel from a live single screen or split screen, you can change its video screen ratio.

  1. Select from the live screen menu. The screen ratio of a specified channel will be changed.
  2. If you want to go back to a previous screen ratio, select again.

01 01:10:25 PM → 2016-01-01 01:10:25 PM

DISPLAY TEXT

Change text output

The NVR can display text on a live screen when a text device is set.

Select text output

This is executable when a text device is connected.

  • How to turn the text output off: Select 'OFF' from the text list.
  • How to display on other devices differently from the preset device: Select a device to display from the text list.

Street photo with visible store signboards and a digital display showing user information.

PTZ CONTROL

With the NVR, you can configure the settings of a PTZ camera as well as commercial cameras in the market to your preference.

PTZ device

This is active only if a channel that a PTZ camera is connected to is selected.

Getting started with PTZ operations

The PTZ camera will be activated only if the channel of the PTZ camera is selected, which can be performed in the following way:

- Using the launcher menu: Click > from the launcher menu of the Live screen.

  • Using the Live screen menu: Select in the context menu of the Live screen.
  • Using the icons on the Live screen: Simply click the icon on the Live screen.

This is available only if a PTZ camera is connected and the icon is displayed on the screen.

  • Even if the connected network camera does not support the PTZ operations, you can configure the PTZ control settings (if possible) by installing the PTZ driver (physical device).
  • It only supports a network camera with Hanwha Techwin's PTZ function and a camera registered in the OKVF.

SAMSUNG XRN-410S - Getting started with PTZ operations - 1

Using the PTZ camera

You can use a single PTZ camera to perform the Pan, Tilt and Zoom operations to monitor multiple places, and configure the custom settings of the presets in a desired mode.

2016-07-21 05:30:25 PM 24:01:21

  1. Open the menu.

The icon in the left bottom of the screen will turn yellow, indicating that the system accesses "PTZ Control" mode. You will see the 'PTZ Control' launcher menu.

SAMSUNG XRN-410S - Using the PTZ camera - 2

- The PTZ working (active) mark can be active even if the PTZ operation is not available in normal mode. So ensure that you have completed the PTZ settings before proceeding.

  1. Adjust the camera recording location by using the PTZ ball in the launcher menu or press the left/right

(▲▼◀▶) button on your remote control to move the camera recording location.

- Sensitivity: Adjust sensitivity for Pan, Tilt controls.

- PTZ Wheel: Click a near area from the center to move the camera lens slowly; clicking a far area will move it fast.

- If clicking and holding the mouse in the left will turn the camera counterclockwise; if clicking and holding the mouse in the right will move the camera lens clockwise.

- Zoom: Activate the Zoom operation of the PTZ camera.

- Iris: Adjust the amount of light incoming to the camera.

• Focus: You can adjust the focus manually.

- Swing: Swing is a monitoring function that moves between two preset points and enables you to trace the motion.

- Group: The group function enables you to group various presels before calling them in sequence.

- Trace: Tracking remembers the trace of movements that you instructed and reproduces it for your reference.

• Tour : Monitor all the groups created by a user in turn.

- Some cameras may differ in the menu title and operation with regard to Swing, Group, Tour and Trace.

SAMSUNG XRN-410S - Using the PTZ camera - 3

Even if the network camera supports the PTZ operations by default, the PTZ control can be enabled only if the applicable menu is active in the launcher menu.

Using Digital PTZ (D-PTZ) function

  1. Register a camera that supports the D-PTZ profile.

In cameras that support the D-PTZ profile, you can use the D-PTZ function.

  1. Both cameras that support general PTZ and cameras that support D-PTZ can control the live image using some of the function menus.

■ For more information about the supported functions, please refer to the camera manual.

Preset

Preset is a specific position remembered by the PTZ camera. You can use the Preset function to define up to 255 presets for a single PTZ camera.

2016-01-01 01:10:55 PM

To add a preset

  1. Check the preset checkbox.
  2. Select <

The virtual keyboard will appear on the screen. Use it to provide the preset name. - Refer to "Using Virtual Keyboard". (Page 27)

• ; You can change the preset settings to your preference.

• : Delete a selected preset.

• : Delete all the existing preset settings.

- You can add up to 255 presets, which is the maximum count supported by the MVR.

- If you replace a camera that saves your preset settings with a different one, you must configure the preset settings again.

  1. Select

The preset setting will be saved under the provided name.

To change or delete a registered preset

2016-01-01 01:10:25 PM View

  1. Check the preset checkbox and select a preset to change or delete.
  2. Press < ■ > or < □ > as needed.

• : Delete all existing preset settings.

If you delete all presets, the default presets specified in the network camera can be deleted accordingly.

  1. Provide a new name and press .

BACKUP

You can check the backup device and set the backup schedule by channel or by time.

Screenshot of a software interface showing color adjustment panels with sliders and dropdowns.

  1. Press the [BACKUP] button on the remote control, or select from the live screen menu.

You can click on < in the launcher menu

  1. The backup settings screen will be opened.

- Channel: Sets the channel to backup.

■ You can select multiple channels.

If you select , all channels will be selected.

- Backup Range: Sets the and time for the backup.

• Overlapped Data : Shows a list of overlapping data on a same time according to the number of data.

It appears when one channel has multiple data on a certain time point due to changing of time or time zone settings, etc.

- Refer to time and time zone of "Setting the Date/Time/Language". (Page 25)

- Device : Select a backup device from the recognized devices.

- Type: Sets the backup data format.

- NVR : Saved data can be played back only by the NVR.

SEC : Saves data in the proprietary format with built-in viewer, which supports immediate playback on a PC.

- When you select the SEC format, you can select or deselect "Password" and "Text data included".

- Path : displays the location of the folder in which the backup file is to be saved.

- Check capacity: Shows the size of the selected backup data, used and available capacity of the selected backup device.

  1. When the backup setup is done, press .

- If no available device is recognized for backup, the button is not activated.

The application may slow down during the backup.

- You can switch to the menu screen during the backup in operation, but playback of data is not available.

- The data can be played back on a Webviewer while the backup is in progress but audio does not function.

- If backup has failed, select "Device > Storage Device" and check the free space of the HDD and check also if the HDD is properly connected.

- Pressing the during the backup will return to the previous menu, while the backup progresses.

You can set up the system, devices, and options for recording, event, and network.

SYSTEM SETUP

You can set up Date/Time/Language, User, System Properties, and Log.

Date/Time/Language

Setting the Date/Time/Language

You can check and set up the current Date/Time and time-related properties, as well as the language used for the interface on the screen.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → → ▶ → → [ENTER] → ▲▼◀▶ → [ENTER]

Setup: Local (repeated many times), Location.

Color/Time/Language Data Time Time from Time type: Data PSC Language Background: Data OK Cancel

- Date: Sets the date and its format that will appear on the screen.

- Time: Sets the time and its format that will appear on the screen.

- Time Zone: Sets the time zone of your area based on the Greenwich Mean Time (GMT).

■ GMT (Greenwich Mean Time) is standard World Time and the basis of world time zone.

- Time Sync.: Specify the use of synchronization with the time server.

Click the button to display time synchronization setup screen.

If you select to use the , the current time will be synchronized on a regular basis by the server

defined as

If this is the case, you cannot change the time setting manually.

- Synchronization: Specify the use of synchronization with the time server.

- Time Server: Enter an IP or URL address of the time server.

- Last Sync Time: Displays the most recent synchronization time from the selected time server.

- Activate as Server: Set to to allow the NVR to act as a Time Server for other NVRs.

- DST: Set up Daylight Saving Time with its period to make the time earlier than the GMT of its time zone by 1 hour during the set period.

- Language: Select your language. Sets the language for the interface.

English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese,

Turkish, Czech, Danish, Swedish, Thai, Romanian, Serbian, Croatian, Hungarian, Greek, Finnish, and

Norwegian are supported.

- Holiday: A user can select specific dates as holidays according to their own preferences. Holidays are applied in the or setting too.

Friday Saturday DATE: 12/03/2017 Time: 12:00-15:00 Date: 12/03/2017 Time: 12/04/2017 Date: 12/05/2017 Time: 12/06/2017 Date: 12/07/2017 Time: 12/08/2017 Date: 12/09/2017 Time: 12/10/2017 Date: 12/11/2017 Time: 12/12/2017 Date: 12/13/2017 Time: 12/14/2017 Date: 12/15/2017 Time: 12/16/2017 Date: 12/17…

Setting History File Edit View Help

e.g. every first day of a year is set to be a holiday if you select January 1 and check <1/1>, and every first day of a year and every first Wednesday of January are set to be holidays if you check <1/1> and .

To use the calendar

SAMSUNG XRN-410S - To use the calendar - 1

  1. Select year and month.

Select the <◀> key on both ends of year and month to move back/forward to the previous/next year or previous/next three month.

  1. Select a date and click on the button.

- A data is marked in gray if there exist data for search for system log, event log, time search and event search.

User

You can set permissions of each user over the NVR's specific function and settings.

Setting the Administrator

You can set and change Administrator's ID and password.

The administrator can use and set all menu items and functions.

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒

⇒ [ENTER] ⇒ ⇒ ▶ ⇒ ⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▲ ⇒ ▶ ⇒ [ENTER]

Login Password New PDF Confirm PDF User password

• ID: Change the admin ID. - Password: Checks the current password. - New P/W: Enter new password. - Confirm P/W: Confirms the new password. - If is selected, the password will no longer be hidden on the screen when you type it.

The initial administrator ID is set to "admin" and you will need to configure the password in the installation wizard.

  • Please change your password every three months to safely protect personal information and to prevent damage to the information. Please note that it is the user's responsibility for security and any other problems caused by mismanaging a password. If you click < ① >, a basic guide for password setup is displayed.

Using Virtual KeyboardSAMSUNG XRN-410S - Setting the Administrator - 2

SAMSUNG XRN-410S - Setting the Administrator - 3

  1. For alphanumeric inputs, the virtual keyboard window appears.
  2. Using the directional key (▲▼◄►), move to the desired text tab and press the [ENTER] button.
  3. In the upper text input box of the virtual keyboard, a list of candidate words containing the selected character is displayed.
  4. Select a word from the list, or use the keyboard to enter the whole word.

If there are many candidate words, use the < > buttons to move between them forward and backward.

  1. Select

The entered word is applied.

■ For upper case letters, use the button. ■ For special characters, use the button. - Using the virtual keyboard is the same as using a normal keyboard in your region. - D allows alphanumeric characters only. The password should be at minimum an 8-digit combination of alphabetical letters and numbers.

User setting

You can create a group or set permissions for each group. You can add a user and edit the registered user information.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▶▼ → → [ENTER] → ▼▶ → → ▲▼ ◀▶ → [ENTER]

Group information Group Name Group Description User Information - User Name: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - User Description: - U…

If you want to add a group

  1. Click on the [ ] button to launch the Group Addition popup window. If you want to add a group, click on .
  2. Press the group name item to launch the virtual keyboard used to enter group names. Enter the group name to register.

- You can add a maximum of 10 groups.

If you want to set group permission

Set permission to access each group.

Each group's users can only access items with a check mark beside them.

  1. Select the menu to set group permissions.

The menu with access permissions will appear when a user of the group logs in. • Live View: You can set permissions to access the live screen for each channel. - Search: You can set permissions to access the search menu for each channel. - Backup: You can set permissions to access the backup menu for each channel. - Menu: You can select and set the setting menu that can be accessed. A group user can only access the menu selected. If you select the menu, the menu permission setting screen will be displayed. - Record Stop, PTZ. Remote Alarm Out, Shutdown: You can select these functions to add to a group's permissions.

  1. Click

Check a group user to give them the permission to access the selected item.

If you want to register a user

Show 1 Show 2 Show Information Group Name OK Cancel OK Cancel/OK Show 1 Show 2

  1. Click the [button] to open the user addition popup window. To add a user, click on it.
  2. Select a group. When registering a user, the selected group will be automatically registered.
  3. A group can be changed after entering all required information.
  4. Enter name, ID, password, and select whether to use the viewer. If you activate the viewer, you will have the right to use the web viewer and the network viewer.
  5. Click . The registered user information will be saved. When you want to delete the group and user information
  6. To delete, click the [ ] button.
  7. The deletion confirmation window will appear, and you can select an item to delete and click .

Setting Permissions

You can set restricted access for all general users. Items with restrictions will require logging in for use.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → → ▶▼ → → [ENTER] → ▼▶ → → [ENTER] → ▲▼◀▶ → [ENTER]

File Wizard New Document Wizard File Wizard to New Document Wizard Auto Log 16 New Document Wizard

- Restricted Access: All menu items allowed for a user can be set with restricted access. - Checked: ☑Restricted

- Not checked (■ Accessible

If it is not checked ( ■ ), any user can access the item regardless of the setting.

- If it is checked (☐), a user can access the item only if the user has permission in the setting.

  • Restriction on Network Access: Restricts remote access from a network
  • All Network: Restricts all access instances via Network Viewer and Web Viewer.
  • Web Viewer: Restricts access via the Web Viewer.
  • Auto Log out: A user will be automatically logged out if there is no operation on NVR for over a set period of time.
  • Manual Input of ID: In the login window, select whether to enter ID.

If the user has restricted access

If a new group is restricted to access the entire menus, the users belonging to the group can access only the basic menus and can change only their respective password.

If all permissions are restricted, you will see only some menu items accessible in the Live screen menu.

Collage of surveillance cameras and camera feeds with visible text overlays and UI controls

To change the user password

If you log in with the user account of a group with restricted access, you just can change your own password.

Setup System + - + - Load 100%

  1. Provide the login information.
  2. Select . The Permission Management screen appears.
  3. Select . The Password dialog shall appear.
  4. Provide a new password.
  5. Select . The old password will be changed to a new one.

System Management

You can check the system version, update to a newer version, as well as data backup and initialization.

Checking the System Information

You can check the current software version and MAC address before proceeding with the upgrade.

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒

⇒ [ENTER] ⇒ ⇒ ▶▼ ⇒ ⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▲▼◀▶ ⇒ [ENTER]

SUPPORT NAME: 100 File Name: SUPPORT Category: SUPPORT NAME: SUPPORT ID: SUPPORT DATE: SUPPORT NAME: SUPPORT ID: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPORT NAME: SUPPO…

  • System Information: Shows the current system's information. The values cannot be changed by a user.
  • S/W Upgrade: Updates the NVR's software up to date.
  • Press the < button to search for and display the equipment to upgrade.
  • Device Name: Displayed if the network viewer is connected to NVR.

To upgrade the current software versionSystem Setup Control Window New Window Control Window New Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Window Control Wi…

  1. Connect a device storing the software to be updated.
  2. It may take about 10 seconds to recognize the device.
  3. Upgradeable devices include USB memory, and network device.
  4. To update the network, the current NVR should have been connected to the network. Upgrade via the proxy server may not be enabled due to the restricted access.
  5. Select from the window.
  6. Select.
  1. When the recognized device appears, select it.

- If you connect a device in the upgrade menu window, you can press the < > button to search for available software.

- If there is an upgrade image on the network, a popup window will appear.

- The button will be activated only if the current version is the same as or older than that of the upgrade.

  1. Press in the "S/W Upgrade" window.

- While updating, it shows the progress.

  1. When the updating is done, it automatically restarts.

Do not turn the power off until it finishes restarting.

SAMSUNG XRN-410S - menu seluo - 1

- If "Upgrade Failed" appears, retry from step 4.

If you experience continued failure, consult the service center for assistance.

Settings

You can copy and import the NVR settings using a storage media.

[MENU] ⇒ [ENTER] ⇒ ▼ ▽

⇒ [ENTER] ⇒ ⇒ ▶ ▼ ⇒ ⇒ [ENTER] ⇒ ▼ ▶ ⇒ ⇒ [ENTER] ⇒ ▲ ▼ ▶ ⇒ [ENTER]

System Management Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8 Model 9 Model 10 Model 11 Model 12 Model 13 Model 14 Model 15 Model 16 Model 17 Model 18 Model 19 Model 20 Output

  • Storage Device: Shows the connected storage device.
  • Press the < button to view the list of storage devices.
  • Export: Exports NVR settings to the connected storage device.
  • Import: Imports NVR settings from the storage device and applies them to the NVR.
  • Uncheck the checkbox of the item(s) you want to import. Only the other items will be applied to the NVR.
  • You cannot retrieve the configuration file from another mode. In other words, in PrP mode, you cannot retrieve the manual setting information. In manual setting mode, you cannot retrieve the PrP setting information.
  • and settings should be used in the same software version.

- Load Factory Default: Restore the factory default settings of the NVR.

Uncheck the checkbox of the item(s) you want to reset. Then, only the other items will return to the factory default.

If selected, a confirmation dialog for "Load Factory Default" prompts. Press to initialize the system to the factory default.

After changing the mode, reboot to initialize (iFnP mode <-> Manual Setup Mode).

- Power off: If the power is off, the first alarm is generated. After checking the checkbox, if the button is pressed, all event alarms that are set to the first alarm output are released, and then the first alarm cannot be selected by other alarm output.

- If that function is set, the first alarm-out checkbox and all alarms in the alarm setup screen are deactivated to Off.

SAMSUNG XRN-410S - Settings - 2

- If you want to initialize the , you need to reset the password.

In case you reboot, reset if the installation Wizard and if not, use the guide screen to reset it.

Log Information

You can browse logs on the system and events.

Checking the system log

System Log shows log and timestamp on every system start up, system shutdown, and changes on system settings.

[MENU] ⇒ [ENTER] ⇔ ▼ ⇔

⇒ [ENTER] ⇒ ⇔ ▶ ▼ ⇔ ⇒ [ENTER] ⇒ ▼ ⇔ ⇒ ▲ ▼ ◀ ➔ [ENTER]

File name (N): \nFile type: All files\nSave (S) Edit (E) View (V) Help (H)\nName Type Date Remarks\n1 Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Alt+Al…

  • Search Day: Click the Calendar icon to display the calendar window, or use the direction buttons to specify the search period of the system log.
  • For using the calendar, refer to "To use the calendar". (Page 26)
  • Search : Specify the date and press this button to display the search result in the log list.
  • Type: When there are too many logs, you can display logs of the desired format by selecting the type.
  • Export: Save all the logged information recorded in the NVR into the storage media.

Checking the event log

You can search recorded events including alarms, camera events and video loss. It also shows the log and its timestamp.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → <System> → ▶ ▼ → <Log Information> → [ENTER]
→ ▶ ▶ → <Event Log> → [ENTER] → ▲ ▼ ▶ ▶ → [ENTER] 

Log-1000000\nSubtotal: Total 100%\nName: (A)\nDate: March 2017\nTime: 9:30-15:30\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.00-6.00\nBalance: 4.05-6.05\nBalance: 4.05-6.05\nBalance: 4.05-6.05…

  • Search Day: Click the Calendar icon to display the calendar window, or use the direction buttons to specify the search period of the system log.
  • For using the calendar, refer to "To use the calendar". (Page 26)
  • Search: Specify the date and press this button to display the search result in the log list.
  • Type: When there are too many logs, you can display logs of the desired format by selecting the type.
  • Export: Save all the logged information recorded in the NVR into the storage media.

Checking the backup log

You can find out who backed up and the details (backup time, channel, device to use, file format, etc.).

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒ <Menu> ⇒ [ENTER] ⇒ <System> ⇒ ▶ ⇒ <Log Information> ⇒ [ENTER]
⇒ ▼ ⇒ <Backup Log> ⇒ [ENTER] ⇒ ▲ ⇒ [ENTER] 

Log 100% CHANGE Source: Log 100% CHANGE Share: 0.0000 Name: 100% Size: 25.0000 Date: 2016-03-27 Time: 0:00:00 (repeated)

  • Search Day: Click the Calendar icon to display the calendar window, or use the direction buttons to specify the search period of the system log.
  • For using the calendar, refer to "To use the calendar". (Page 26)
  • Search: Specify the date and press this button to display the search result in the log list.

SETTING THE DEVICE

You can configure settings related to camera, storage media, monitor and text.

Camera

To register a camera

You can register a network camera for each channel and make a connection.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Device> → ▶ → <Camera> → [ENTER] → ▼
→ <Cam Registration> → ▲▼◀▶ → [ENTER] 

Setup Tools Device Balance Balance Balance C Components Storage System Performance 2014-03 Balance Soft Layers... Save

C:\Users\Current Settings\Current Settings\Current Settings\Current Settings Index 11 May 2016 Name: Windows Size: 100 KB Date: March 2016 Time: 11 May 2016 Status: Status OK Cancel Help (repeated)

  • Preview: View the video of the channel as a current image.
  • Cameras searched with ONVIF do not provide previews.
  • Protocol: Shows the protocol information of a registered network camera. • Model: Shows the camera model name.
  • IP Address: Displays the IP address of a network camera.
  • Connection: Displays the connection status. • Data Rate: Displays the total amount of data received by the channel.
  • PoE Status: Displays connected PoE status information.
  • ONVIF Setup: You can additionally set up ONVIF protocol cameras.
  • Error code guides: You can check the details of generated error codes.

If the MVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras. For more information on network settings, refer to "Network Configuration" (Page 44).

If you want to register a camera in PnP mode

Current Current Menu Current Report Un-Menu Current Menu Current: Current Menu Current: Forward Current: Next Left Menu: Forward Next (repeated) Previous Menu: (repeated) New

  • When you connect a camera in PnP mode, the initial ID, password, and DHCP mode should be set in advance. Samsung cameras are registered for Samsung protocols, and other cameras are registered using the ONVIF protocol.
  • In PnP mode, you cannot connect a device that runs the DHCP server in the PoE port or camera setting port. (Ex: bus)

To auto-search for and register a network camera

Causes Regulator Cause of Transport Company - 1 Cause of Transport Company Name Exhibit Date Year Month December 2014-06-05 2014-07-01 2014-08-01 2014-09-01 2014-10-01 Source: Causes Regulator Copyright © 2014-06-05

  1. In the field, click on the button.
  2. Search for a connected network camera.

- An already registered camera will be marked in blue in the list.

- If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as 192.168.1.100), then press the <5> button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to assign the IP manually.

  1. Select a camera from the camera list to see a preview of its current video feed. ■ Camera searched with CNVF does not provide previews.
  2. Check the checkbox next to a network camera that you want to connect to.

- You can select all of the network cameras in the list and provide them all at once.

- Click a header at the top of the list to sort the list according to that header.

- Registering a camera with a user account other than admin may restrict camera function.

- When you change the camera ID/password in the camera web viewer, if the camera is already registered in NfR, you also have to change the camera ID/password information registered in NfR.

  1. Click on the button to enter the selected network camera's IP and port.
  2. Press the button to make a connection to a camera.
  3. Press to register the selected camera.

To manually search for and register a network camera

SAMSUNG XRN-410S - Menu Setup - 3

  1. In the menu, click on the button.
  2. The manual search window will appear.
  3. Select a channel and protocol used to connect to a camera. The input items may differ depending on the selected protocol. • SAMSUNG : Comply with the internal network protocols adopted by Hanwha Techwin.
  4. ONVIF: Means the camera supports ONVIF protocols. When connecting a camera that its name cannot be found from the list, select . Time difference between the ONVF camera and NMR exceeds more than 2 minutes, the camera cannot be connected. In this case, synchronize the ONVF camera's time to the NMR or set times of both camera and NMR to a same NTP server (if in the same time zone), or make the NMR an NTP server.
  5. RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.
  6. If you select the protocol, check options as necessary.
  7. Model: Select a camera model.

Samsung Network Camera/Encoder: Means the camera/encoder supports Hanwha Techwin's SUNAPI, SVNP protocol. When connecting a camera that does not appear in the camera list, select Samsung Notowrk Camera/Encoder. However, you must select the correct model name of the camera, if it's in the list. Some of obsolete camera models may not be supported. - The below models are discontinued. If you register them with CMNT, some camera functions will be restricted or cause errors. It is recommended you register the Samsung protocol. SNB 2000, SNB 3000, SNC B2315, SNC B2331, SNC B2335, SNC B5368, SNC B5395, SNC B5399, SNC S70. SNC 1300, SND -460V, SNV -560, SNB 3080, SNB 3080C, SND 3080F, SND 3081, SNP 3301, SNP 3301H, SNP 3350, SNP 3370, SNP -2370TH, SNP -3750, SNV-3800, SNP -2430

- Address type : Select an address type of the camera.

- Address type can be different depending on connected product model.

- Static(IPv4)/Static(IPv6) : Used to provide the IP address of the camera manually.

- Wisenet DDNS : This is available only if the camera is registered with the Wisenet DDNS(ddns.

hanwhasecurity.com) server. Provide the registered domain for DDNS ID.

Ex) http://odns.hanwha-security.com/snb6000 → provide "snb5000" for Wisenet DDNS

- URL : Used for URL address input.

Refer to the user manual of the connected camera and check the DDNS specification that is supported by the camera.

- IP Address : Provide the IP address of the camera.

• Device Port : Provide the device port of the camera.

- HTTP Port : Provide the HTTP port of the camera.

- ID : Provide the ID of the camera that you want to register.

- Password : Enter the password of the camera to be registered.

  1. Select or for the protocol and enter your input for each field appears.

- ONVIF Address / RTSP URL : Enter the camera's RTSP access address that supports ONVIF or RTSP. For more information about the RTSP address, refer to the manual of each applicable network camera.

• ID : Enter the ID for accessing via ONVIF/RTSP protocol.

- Password : Enter the password for accessing via ONVIF/RTSP protocol.

- Mode: If button clicked, setup window will appear. Select a mode that is supported by the network camera in RTSP connection mode.

- TCP: The connection type with the network camera will switch to "RTP over TCP".

UDP: The connection type with the network camera will switch to "RTP over UDP".

- HTTP: The connection type with the network camera will switch to "RTP over TCP (HTTP)".

- HTTPS: The connection type with the network camera will switch to "RTP over TCP (HTTPS)".

If you want to check the error details of camera registration

If you failed to register a camera, the reason for the failure will be displayed.

- Connection failed due to unknown error. : This message appears if the camera has failed to be registered due to unknown connection status.

- Due to the camera account locking, access has failed. : When you enter a wrong ID/password 5 times to login to the camera account, this message is displayed.

Try to log in again after 30 seconds. If the same message appears, you may need to check whether someone has tried to access your camera account from the outside.

- Connected successfully.: This message appears if the camera is connected successfully.

- Incorrect model information. Provide the correct model information. : This message appears if the model information provided for registering the camera is incorrect.

  • Authentication has failed: This message appears if the ID or password provided for registering the camera is incorrect.
  • Connection has failed due to excessive concurrent users. : This message appears if the concurrent user count exceeds the upper limit.
  • Connection has failed due to incorrect HTTP port information. : This message appears if the HTTP port number of the camera is invalid.
  • Connection has failed. Unknown connection status.: This message appears if the camera has failed to be connected due to a unknown error.
  • User Model Modification : When registering a new camera, it is named according to the device's default if user set the model to . In case if automatic registration fails, user can change the model name of camera to be registered.

To edit camera profile

When a camera is added for the first time, it is added as the default profile of H.264, H.265 and MJPEG in order temporarily.

To change its profile, refer to "Setting the network camera's recording profile" (Page 41) or "Live Setting" (Page 36).

In case of MrR, if you set 3 different profiles for live, recording and network profile, one camera will produce video streams accordingly, having different stream formats. Especially, note that the live profile may vary depending on the used screen split mode.

- For cameras, if applied with one profile only, the produced frame rate is fixed as the profile specifies; if applied with multiple profiles, produced video stream's frame rate is not guaranteed. For example, if applied with 2 profiles of 30fps, the camera may transmit streams at 20fps.

ONVIF Setup

In the bottom of the camera addition screen, click on the button to set additional settings for cameras with the ONVIF protocol.

- You can change the information only if the user account (camera account used for camera registration) is used to read the user information and a connection is made with the admin privilege.

CNCF Setup Profile Information File Name: File Type: File Address: File Color: File Size: 100% Size: 50% Max Mode: 1.44 Audio Mode: Audio Color: Auto: Auto Rate: 100% Auto Marker: 100% Auto Color: Auto Rate: 100% Auto Marker: 100% Auto Rate: 100% Auto Marker: 100% Auto Rate: 100% Auto Marker: 100% A…

Profile

  • CH: It shows the list of registered camera with the ONVIF setting.
  • Add Profile: You can add camera profile. After adding a profile, click on the button to add it to the list.
  • Delete: After selecting the profile to delete, click on the button to delete the selected profile. • Profile information : You can set the details of the selected profile.

After finishing setting each item, click on the button to save changes.

User

  • Add User: You can add a camera user. After adding a user, click the button to add them to the list.
  • Delete: After selecting the user to delete, click the button to delete the selected user.
  • User Information: You can set the details of the selected user.

Network

You can set the details of the network.

  • IP Type: Select from either the IPv4/IPv6 IP types. • DHCP: Select whether to use DHCP.
  • DNS / NTP Server: Only if the DHCP setting is enabled, the DHCP checkbox will be activated.

- If DHCP is checked, you can manually enter the IP address.

Relay

You can set details of the relay.

• Digital Output: You can select a digital output channel. - Relay Mode: Select either bi-stable or mono-stable modes. - Relay Idle State: Select either open or closed relay standby modes. - Delay Time: Select the relay operation waiting time.

Event

You can set details of the event.

• Available events (camera): It shows the list of all the events supported by a camera using the ONVIF protocol. - NVR supported events: You can map the list of events supported by a camera to events that the NVR can detect. There is no default value. It only shows the value sent by a camera.

Camera Setting

You can change the video settings of a registered network camera for each channel.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ → → [ENTER] → ▼▶ → → [ENTER] → ▲▼◀▶ → [ENTER]

Current Current Status: Current Status: Current Status: Current Status Name: 012345 Date: March 2016 Time: 01:00-01:30 Type: 01:00-01:30 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0000 Value: 0.0017 Value: 0.…

  • Add: You can add a camera profile. Click on the Add button to launch the addition window. Enter the information and click on the button to add it to the list.
  • Delete: You can delete the selected profile from the list.
  • Select Camera: Select the camera channel to change the video transmission settings. • Profile: Show a video profile for the connected camera.
  • Codec: Show the codec information for the selected profile. • Resolution: You can change the resolution of the selected profile. • Frame Rate: You can change the frame rate of the selected profile.
  • Bitrate Control: You can change the bit rate for video transmission of the selected profile.

SAMSUNG XRN-410S - Camera Setting - 2

If you change the settings of a specific profile for each model, the effective range of the frame rate may be changed accordingly. For example, if you set the frame rate of the first profile to 30fps, the frame rate of the second profile will be changed to 15fps.

  • Menu options other than codec, resolution, and transmission rate can be configured in the settings menu of the network camera.
  • If you change the current profile settings, you may encounter an interrupted playback on the recording or live screen for a certain time.
  • Changes made in the Camera Setup page are applied immediately, while changes made through the camera's web page may require up to 3 minutes.

Setup

In the bottom of the camera setting screen, press the button to set your camera while watching the live video of the selected camera.

2016-01-01 09:10:25 PM ###

SAMSUNG XRN-410S - Setup - 2

- SUNAPI (Samsung Unified Network API): Camera that supports the communication protocols provided by Hanwha Techwin. 1. Camera supporting SUNAPI.

  1. A camera connected with admin privileges.
  2. A camera connected to Samsung protocols. In the above cases, you can use the function.

For more details on camera settings, refer to the camera user manual. Settings and operational specifications vary depending on the camera. This function is not supported in some models.

SSDR

If there is a significant difference between dark and bright areas, increase the brightness of the dark areas to maintain the overall brightness level. Mode, level, and D-Range can be set.

Backlight

You can view both bright and dark areas. Mode, WDR level, and WDR black/white levels can be set.

Exposure

You can adjust the exposure of your camera. Brightness control, shutter, SSNR, Sens-up, shutter/lens, and gains can be set.

Day/Night

You can change the mode to adjust the color and contrast.

Mode, switching time, brightness change, alarm time, alarm input/output, negative color, daytime/nighttime switching, simple focus, and activation time can be set.

Special

DIS (shaking compensation) and use of Defog levels can be set.

Focus

You can adjust the focus of your camera's video. Items of Simple Focus and Focus-Initialize Setting can be set.

Flip

Mirror and flip modes can be set.

After finishing with setting camera, click on the button to move back to the previous screen.

Dewarping Setup

Press at the bottom of the camera settings screen and a distortion correction settings window for each channel is prompted.

Cable File Edit View Insert Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools Help Tools He…

Recording Parts File Path View Path Audio Audio Mode

  • Profile/View type : You can select the view type of profiles, except for fixed profiles (SourceMJPEG, SourceH264, DewarpMJPEG, DewarpH264) whose settings can't be changed, in the profile list on the distortion correction settings pop-up window.
  • Mounting mode: You can change the fisheye installation type. You can select a view mode from among CEILING/GROUND/WALL depending on the installation location.
  • View: You can change the fisheye view mode of the current screen according to each split section.

SAMSUNG XRN-410S - Dewarping Setup - 3

- If there is no camera registered in the NVR that supports fisheye view, will not be available.

Setting Camera Password

You can change the passwords of all registered cameras at once.

|MENU| ⇒ |ENTER| ⇒ ▼ ⇒ <Menu> ⇒ |ENTER| ⇒ ▼ ⇒ <Device> ⇒ ▶ ⇒ <Camera> ⇒ |ENTER| ⇒ ▼ ⇒ <Camera Password> ⇒ |ENTER| ⇒ ▲▼▲▶ ⇒ |ENTER|

Save As Use Properties Save As: New As: New As: New As Show to change the password of all new as they are approved as: If this is not required, it can be used to access your password. New A/B New B/B New As: New As: New As: New As: New As Preview Preview is set to be the password after installation…

- Now P/W: Input a new password according to the password setting rules.

- Confirm PAN: Input the new password again.

If you click < ① >, a basic guide for password setup is dispensed.

If selected, the password is no longer hidden on the screen when you type it.

- A camera password registered with OMVF and RTSP cannot be changed.

Password setting guide

The length and limitations of a password are as follows.

  • Uppercase letters/lowercase letters/numbers/special characters, containing at least 3 out of the 4 character types mentioned: 8 or 9 digit combination
  • Uppercase letters/lowercase letters/numbers/special characters, containing at least 2 out of the 4 character types mentioned: 10 to 15 digit combination
  • The password shall not be identical to the user ID.
  • To enhance security, it is not recommended to use repeated digits or letters, or keyboard patterns as a password.
  • Special characters accepted for a password: \~1@15%^0_1=|0|.?

Live Setting

You can change the live transfer settings of the network camera.

[MENU] ⇔ [ENTER] ⇔ ▼ ⇔ <Menu> ⇔ [ENTER] ⇔ ▼ ⇔ <Device> ⇔ ▶ ⇔ <Camera> ⇔ [ENTER] ⇔ ▼▶
→ <Live Setup> ⇔ [ENTER] ⇔ ▲▼◀▶ → [ENTER] 

Camera Can Properties Camera Setup Camera Resource Camera Help 01 - Can Properties 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 7…

• Live Replacement: You can select the live profile setup mode. If you select , the profile setup items are enabled, and you can change settings manually. - Auto : In case of split mode, the profile for live monitoring shows the Live4NVR profile(basic: H.264 800'600 30fps) created at the time of registration and it automatically selects the second profile in case of single mode. - Manual: Live monitoring is performed with the profile selected by the user from the registered camera profiles. - Record: Live monitoring is performed with the profile set for recording. - Profile: You can select the video profile of the connected camera setting. - Codec : Show the codec of the selected recording profile. - Resolution: Show the resolution of the selected profile. • Frame Rate : Show the frame rate of the selected profile.

Channel Setting

You can configure the video settings for each channel.

[MENU] ⇔ [ENTER] ⇔ ▼ ⇔

⇔ [ENTER] ⇔ ▼ ⇔ ⇔ ▶ ⇔ ⇔ [ENTER] ⇔ ▼▶ → ⇔ [ENTER] → ▲▼◀▶ → [ENTER]

Save As/Down Paste As/Down Delete As/Down Name: C#

  • Apply to CH: if you select, the 'Apply to CH' confirmation window will appear. After selecting channels that the settings will be applied to, click on to apply them to the selected channels.
  • Video

- : You can turn ON/OFF the selected channel's camera.

  • : Shows information other than the video of the selected channel. For privacy protection, it does not display the video while the recording continues.
  • : Shows nothing but an empty screen while the recording continues.

If the channel is set to or mode, the channel's sound is not hearable. However, the channel's sound is recorded if its Audio setting is set to . even the sound is not heard in Live mode. - Audio

  • If set to , you can turn the audio of the channel ON/OFF on the Live screen.
  • If set to , the channel's audio is off on the Live screen and not recorded.
  • Camera Name : Provide a camera Name. ■ You can enter up to 15 characters including space.

Storage Device

You can check information on storage devices.

Device/Format

You can check storage devices and their capacity, usage as well as status. HDD, USB (memory or HDD) can be connected as a storage device.

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒

⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▶ ⇒ ⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▲ ▼ ▶ ⇒ [ENTER]

Manage Settings Name: 01-02 Address: 01-02 Status: 01-02

  • Storage Status : Displays the working status of a storage device.
  • Red: Displays the situation of video loss.
  • Green: Displays the normal situation without video recording losses.
  • Status

■ Full BPS: Displays the current rate of recording.

  • Current Loss Rate: Displays the current recording loss rate.
  • Max Loss Amount: Displays the maximum amount of losses up until now.
  • If the recording loss persists, please refer to the "Troubleshooting" section in order to perform checks. (Page 52)

• No.: You can check the designated number for the built-in HDD.

  • If you want to find out about the location corresponding to the HDD number, refer to the HDD map. (XFN-410S no HDD map)
  • Capacity: Displays the amount of storage device use and the full capacity.
  • Usage: Designate the purpose of use for a storage device. (However, only the display function is available for ARB)

- If the state of use is "Not Defined", format the HDD before use.

  • Status: Displays the current working condition of a storage device. For inspection or replacement of HDD alarms, please refer to "HDD Alarm Setting." (Page 36)
  • Normal: It is displayed during normal operation.
  • Inspection: Operating with partial problems.
  • Replacement: It is displayed when you can no longer use it.

• Temperature: You can check the temperature of the HDD mounted in the NVR. • Time: Displays the use time of an HDD. - Format: Select a device and click on format, after which a format confirmation window appears. Click on the button to format the selected storage device.

- Formatting will delete all the recording data that has been saved. Be careful.

■ While formatting is ongoing, you cannot record video. - Do not remove a formatting device until it is finished. - After installing an HDD, if the state of use of the HDD is "Not Defined", format the HDD before use. If the warning message persists after formatting, replace the HDD with a new one.

• ARB: Video that was not recorded due to a camera disconnection can be backed up after the connection with the camera is re-established. Press the button and a window is opened. - For ARB storage: Select a storage device to be set to ARB. - Select ARB channel: Select a channel to run the ARB.

- You can select multiple channels.

If you select , all channels will be selected.

- ARB bandwidth: Select a bandwidth for the ARB function.

- Only our camera products (SUNAPI version 2.3.2 or higher) support the ARB function. To use this function, the camera will need to record video on the SD card.

  • The maximum bit rate value for the profile used in camera SD card recording should be set to under 614Mbps. The detailed information on how to set the profile for SD card recording can be found in the camera manual. To use the ARB function correctly, both the camera and NVR should be time synchronized with the time server. (Page 26)
  • ARB function is activated when NVR starts/when the channel camera set is reconnected/when an NVR recording missing section recurs at regular intervals after NVR starts.
  • NVR recording missing section that can be restored with the ARB function is for 24 hours backwards from the point when the ARB function is activated.
  • You can check which channels have ARB function activated through the message on each channel screen that is displayed when selecting a channel. (Page 19)
  • HDD Map: You can check the location according to the assigned number for the HDDs installed inside. (XRN-81CS) ■ Refer to this when servicing or installing an additional HDD.
  • Do not add or remove an HDD while IVR is running.

HDD Alarm Setting

For HDD malfunctions, you can set the inspection alarm output terminal, the replacement alarm output terminal and the alarm time.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ ▼ → → [ENTER] → ▼▶ → → [ENTER] → ▲▼◀▶ → [ENTER]

Manage Currency Currency: 40.000 Currency: 100.000

• Alarm

  • If was selected, both beep sound and alarm signal through rear side pons will output.
  • If was selected, a beep will sound.
  • Alarm signal will output through the alarm out port on the rear side when selected <1>, <2>, <3>.

- Check Alarm Output Port: If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

  • Replace Alarm Output Port: If HDD generates replace alarm, the alarm signal will output to the specified alarm output port. • Duration : Sets the alarm duration for the alarm signal and beep sound.

status means that the HDD is operating but it has problems that require technical examination. (appears on the Live screen.

status means that the HDD has a defect and requires immediate replacement. (5) appears on the Live screen.

Remote Devices

You can adjust the ID for a remote control to be used in connection with the NVR.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Device> → ▶ ▼ → <Remote Device> → [ENTER] → ▲ ▼ ▶ ▶ → [ENTER] 

Service Device Status: Status 1 OK Cancel

  • Remote control: Select whether to use a remote control. • ID: Select an ID number linked to a camera.

If the remote control ID does not match, it will not operate properly.

SAMSUNG XRN-410S - Remote Devices - 2

- To change the remote control ID, refer to 'Changing the Remote Control ID'. (Page 5)

Monitor

You can set the information displayed on the monitor as well as the output system.

Monitor settings

You can configure the monitor output-related settings including the displayed information, dwell time, and output system.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Device> → ▶ ▼ → <Monitor> → ▲ ▼ ▶ ▶ → [ENTER] 

Event Status Preview Preview: Event Status Preview: Background

  • Event Display: Sets the dwell time of the event channel display on the monitor when an event occurs. If you set it, it will keep displaying until you cancel it.
  • Display: Displays only checked items on the monitor screen.
  • Sequence switching time: Set the automatic switching time for the segmented screen in live mode.
  • Video Output: Set the resolution for the video output. If you press the [STOP (■)] → [ZOOM] → [STOP (■)] → [ZOOM] → [MENU] button on your remote control, the basic resolution pop-up will appear. You can adjust the desired resolution in it.
  • If the changed resolution is not supported by the monitor, the video may not be displayed properly. If this is the case, the screen will restore the default resolution after a certain time. Then, you can change it to a different resolution.

To adjust the display position

Some monitors may not display information (camera name, icon, time information, etc.) about the NVR, depending on the condition. Then, you can change the display position of the data.

Collage of surveillance camera feeds showing room views, camera, and control panels with Chinese text overlays

  1. From the monitor setup menu, select
  2. Using the number button to adjust the screen that is cut off.
  3. Press .

SAMSUNG XRN-410S - To adjust the display position - 2

- If you operate at 60Hz with 4K resolution, the screen may not be able to display. Please check whether your TV supports 30Hz.

Text

Device and events can be set up.

Device Settings

Relevant values of a device connected to NVR can be set.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Device> → ▶▼ → <Text> → [ENTER] → ▼ → <Device> → ▲▼ ◀▶ → [ENTER] 

Task Name: Category: Size: 100 Width: 500 Distance: 500 Height: 500 Balance: 500 Finish

• Device : Enter the user's desired name • Use: Select whether or not to use - CH: Select a channel to add a device from a channel table. - Port: Display a port number that is set - Encoding type: Select an encoding type to use from a list.

- You can select starting and ending character strings.

SAMSUNG XRN-410S - Device Settings - 2

- General characters, special characters, and Flex codes (e.g. 0x12, 0x34) can be used for character strings.

SAMSUNG XRN-410S - Device Settings - 3

■ Equipment connected to NVR uses TCP/IP communication protocol.

Event Settings

You can set up event keywords.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Device> → ▶ ▼ → <Text> → [ENTER] → ▼ ▶ → <Event> → [ENTER] → ▲ ▼ ▶ ▶ → [ENTER] 

Text Total amount Payment OK Cancel

  • Total amount: Set a total amount condition to receive alarms.
  • Keyword: If the button is clicked, a screen to add keywords pops up. If you select one of the added keywords to delete and click the button, the selected keyword will be deleted.

SETTING THE RECORDING

You can setup scheduled recording, event recording and other recording related settings.

Recording Schedule

Make your reservation on a date and time to schedule the recording on specified time.

[MENU] → [ENTER] → ▼ → <Menu> → [ENTER] → ▼ → <Record> → ▶ → <Recording Schedule> → [ENTER] → ▲▼◀▶ → [ENTER] 

Setup Event Balance (repeated) Blank Return

Drawing Console: File Edit View Insert Help, Add View Insert Help (repeated), Edit View Insert Help (repeated), All Views Added

  • AI: The entire time range (Monday through Sunday including holidays, AM 0~ PM 23) will be reserved with the same recording schedule
  • Apply to CH: If you select , the "Apply to CH" confirmation pop-up window will appear. After selecting channels that the settings will be applied to, click on to apply them to the selected channels.

SAMSUNG XRN-410S - Recording Schedule - 3

- Event recording and scheduled recording starts about 3 seconds prior to the event/schedule for guaranteed recording.

Record setting by the color

Color Function Description
No Cover No Reporting No schedule / event recording
Green Continuous Scheduled recording only
Orange Event Event recording only
White Both(Cons&Ent) Both scheduled / event recordings

Each press of a selected cell will cycle through -- -- --

Record Setting

You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ ▼ → → [ENTER] → ▼ → → ▲ ▼ ◀ ▶ → [ENTER]

Recent Status: Current Status: 100% or less (repeated), Status: 100% (repeated), Status: OK Cancel Help (repeated), Helds: (repeated)

  • Apply to CH; If you select , the 'Apply to CH' confirmation window will appear. After selecting channels that the settings will be applied to, click on to apply them to the selected channels.
  • Standard, Event: Configures Standard recording and Event recording.
  • FULL: Records all frames led by the camera.
  • KEY: Records only key frames fed by the camera. Actual recording rate may differ from camera settings. In general, 1 to 2 frames per second are recorded. OFF: No recording is made.
  • Frame
  • FULL: Shows the amount of data for all the scene recordings.
  • KEY: Shows the amount of data for the main scene recordings.
  • Limit: Set the amount of data allowed for input for each channel.

- Event: When an event occurs, you can set which point you will start or stop recording.

  • Pre: When an event occurs, recording will be started regardless of the time set. If you set it to five seconds, recording will start at five seconds before an event occurs.
  • Post: When an event occurs, recording will continue after the time set. If you set it to five seconds, recording will continue for a further five seconds after an event is finished.

- Audio: Specify whether to record the sound received from the camera or net.

SAMSUNG XRN-410S - Record Setting - 2

If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to recording even when the channel is configured to recording mode. For Key Frame recording channels, the icon for limited recording appears on the live screen's top side. But if the sum of the limits is below the max limit, you can still receive the entire frames despite exceeding the permitted bitrates for each channel.

# channel displayed in yellow indicates that the recorded data is not being transferred from the camera and that the recording is being performed temporarily using another profile on the camera. Check the channel information to see the applied profile to the channel listed in yellow. A channel displayed in orange indicates that the amount of inputled data is greater than the permitted data amount. In this case, it is impossible to record all of the incoming frames. Instead, only part of the frames (1 or 2 frames per second) can be recorded. To resolve this issue, you must set the permitted data amount to be greater than the amount of inputled data. Refer to notes on "Record status" (Page 20).

Setting the network camera's recording profile

You can configure the video profile settings for instructing the network camera (connected to each channel) to make recording.

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒

⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▶ ▼ ⇒ ⇒ [ENTER] ⇒ ▼ ⇒ ⇒ [ENTER] ⇒ ▲ ▼ ▶ ▶ ⇒ [ENTER]

Analysis Settings File Edit View Tools Remove Format Help. 1. 1.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000. 1. 1.1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.4…

SAMSUNG XRN-410S - Setting the network camera's recording profile - 2

- You can configure the settings only for the profiles that are supported by the camera.

If the profiles used for recording and network are different, camera's video feed may not comply with the frame rate as specified in the camera.

  • Profile: Select a record profile for the connected camera.
  • Codes: Show the codes information for the selected record profile.
  • Resolution: Display the resolution for the selected record profile.
  • Frame Rate: Display the baud rate for the selected record profile.

Record Option

When the HDD capacity is full, you can set whether to stop recording or start overwriting.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ ▼ → → [ENTER] → ▲ ▼ ▶ → [ENTER]

Auto Driver Class 1 - Alt

  • Disk End Mode: Select a HDD repetitive recording type.
  • Overwrite: If the HDD is full, this will overwrite the existing data and keep recording.
  • Stop: If the HDD is full, this will stop recording automatically.
  • Disk End Beep: If you select for the disk end mode, this button will be active. Specify the use of beep when the HDD recording ends. If you check it, the beep will sound on the disk full and the recording stops.
  • Auto Delete: If you check this option, the period list box is active. Specify the deletion period to delete any earlier data than the specified date. However, you can search for data from the current time to the selected date.
  • You can select a channel and set a different recording duration for each channel.
  • Apply to CH: if you select, a confirmation dialog window is opened. Select a channel to apply the applicable settings then press. The settings will be applied to the selected channel.

- If you press when you have completed your settings, all the existing data earlier than the specified period will be deleted automatically. So it is recommended to backup the previous data if necessary for later use.

SETTING THE EVENT

You can make the setup for record in case of sensor detection, camera event or video loss detection.

Sensor Detection

You can set the sensor's operating condition and connected camera, as well as alarm output and its duration.

[MENU] ⇒ [ENTER] ⇒ ▼ ⇒

⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▶ ⇒ ⇒ [ENTER] ⇒ ▼ ⇒ ⇒ ▲▼◀▶ ⇒ [ENTER]

Setup Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor Event Sensor E…

Sensor Properties Source: Database: Name: Data ID: Data type: 1.000 2.000 3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000 21.000 22.000 23.000 24.000 25.000 26.000 27.000 28.000 29.000 30.000 31.000 32.000 33.000 34.000 35.000 36…

  • Apply to other sensors: if you select, the 'Apply to other sensors' confirmation window will appear. After selecting channels that the settings will be applied to, click on to apply them to the selected channels.
  • Sensor Operation: Sets the operation mode of sensors.

- In the tab, you can set whether or not to use a sensor.

  • : Sensor is opened. If the sensor is closed, it generates alarm.
  • Sensor is closed. If the sensor is open, it generates an alarm.

- Cam: Select a channel to be connected to the sensor.

If a camera is selected, the "Cam Preset setup" window appears. Select a channel and set up the preset.

- Preset setup can be done in PTZ mode.

  • Alarm out: Sets the alarm output method.
  • For further information on alarm output, refer to "HDD Alarm > Alarm" (Page 38). • Duration: Sets the duration of the alarm signal and alarm sound.

If you select the tab, you can configure the sensor operation settings of the network camera connected to each channel.

If the connected network camera that has configured the alarm input settings triggers an alarm, the NVR will perform the alarm out.

Camera Event

You can set the activation of events (motion detection, video analysis, audio event) sent from the camera, the alarm output method, and the alarm time.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ ▼ → → [ENTER] → ▲ ▼ ▶ → [ENTER]

Camera Edit window with Name field set to 123. Menu bar shows File, Edit, View, Insert, Tools, Help. A list of 99 items each with value 100.

  • Apply to CH: If you select this, the 'Apply to CH' confirmation window will appear. After selecting the channels that the settings will be applied to, click on it to apply them to the selected channels.
  • Camera Event: Select whether to use event detection.
  • MD: Select whether or not to use motion detection from the camera.
  • Smart Search: Enables or disables the Smart Search option. To use the smart search function, the smart search option must be set to . Refer to "Smart Search" (page 52).
  • Cam: Select an event detection channel. If you select a camera item, the 'Camera preset' screen will appear. Select a channel to connect and set the preset.

■ You can set the preset in PTZ mode.

• Alarm : Select the method for alarm output. - For more details, refer to "HDD alarm > Alarm". (Page 38) - Alarm Duration: Set the duration of alarm. - Camera MD: You can set the detailed setting of motion detection for a network camera connected.

Timestamp: 2018-01-01 03:10:25 PM. Repeated text: Control Panel.

- Mode: Set the motion detection mode.

  • Area : Click on and when the detailed setup menu appears, set the motion detection area.
  • Sensitivity: Set the sensitivity for motion detection. (very low/low//medium/high/very high).
  • Size : Click on . When the detailed setup menu appears, set the max/min size of the object to be detected.
  • Activation Time : Select the operation time of motion detection.

After finishing with setup, click on the button to move back to the previous screen after saving the setup.

Video Loss Detection

You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to unstable network connection.

[MENU] → [ENTER] → ▼ →

→ [ENTER] → ▼ → → ▶ ▼ →
Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SAMSUNG

Model : XRN-410S

Category : VCR