WMD 26101 T - Washing machine BEKO - Free user manual and instructions

Product Type	Freestanding Washing Machine
Brand	Beko
Model	WMD 26101 T
Capacity (kg)	6
Maximum Spin Speed (rpm)	1000
Energy Class	A+++
Dimensions (H x W x D) cm	84 x 60 x 50
Net Weight (kg)	67
Power Supply	220-240 V / 50 Hz
Water Consumption per Cycle (L)	49
Noise Level Washing/Spinning (dB)	58 / 76
Programs	Cottons, Synthetics, Delicates, Wool, Quick, Rinse & Spin, Drum Clean
Additional Functions	Child Lock, End Time Delay, Quick Wash, Prewash, Extra Rinse
Energy Consumption per Cycle (kWh)	0.98
Annual Energy Consumption (kWh)	176
Annual Water Consumption (L)	9800
Display Type	LCD
Door Type	Front-loading with porthole
Drum Volume (L)	45
Safety Features	Child Lock, Overflow Protection, Unbalanced Load Control
Maintenance	Clean detergent drawer, clean filter, descale periodically
Spare Parts Availability	Drum bearing, belt, pump filter, door seal, control board
Repairability Index	8.2 / 10

Frequently Asked Questions - WMD 26101 T BEKO

How do I clean the filter on my Beko WMD 26101 T?

To clean the filter, open the lower flap, unscrew the filter cap counterclockwise, remove any debris, and rinse it under running water. Ensure the cap is tight before restarting.

What should I do if the washing machine does not start?

Check if the appliance is plugged in, the door is closed properly, and the water supply is turned on. Also verify the 'Child Lock' feature is not activated.

How do I activate the child lock?

Press and hold the 'Child Lock' button (usually indicated by a padlock icon) for 3 seconds until the lock symbol appears on the display. Repeat to deactivate.

What is the maximum spin speed of this model?

The Beko WMD 26101 T has a maximum spin speed of 1000 revolutions per minute (rpm).

How much laundry can I put in a 6 kg machine?

A 6 kg capacity is suitable for about 30 cotton T-shirts or a single duvet. Do not overload to ensure effective cleaning and avoid damage.

Does this washing machine have a quick wash program?

Yes, it has a Quick Wash program (often 30 minutes). Check the program selector knob for 'Quick' or 'Super Quick' option.

How do I descale the machine?

Use a washing machine descaler according to the package instructions. Run an empty hot cycle (90°C) with the descaler in the detergent drawer. Repeat every 3 months.

What is the energy rating of the WMD 26101 T?

This model has an energy class of A+++, meaning it is highly energy efficient.

Why is the machine shaking during spin?

Ensure the machine is level on the floor, the transit bolts are removed, and the load is balanced. Overloading or uneven distribution can cause excessive vibration.

How do I clean the detergent drawer?

Remove the drawer by pressing the release catch, rinse it under warm water, and use a brush to clean the compartments. Clean the drawer housing with a damp cloth.

USER MANUAL WMD 26101 T BEKO

Washing Machine | User's Manual

Control Panel

1 Program Selection and Starting Machine

Plug your machine into an outlet. Turn on the machine by pressing the "On / Off" key. Open the door by pulling the handle and load the machine without exceeding the loading capacity, then close the door. Specify the appropriate program by looking at the program selection table according to the type of laundry, degree of soiling, and washing temperature. Position the program selection key to the desired washing program-temperature. Select a convenient spin speed related to the selected program. If you are using an auxiliary function, press

the desired auxiliary function key.

Afterwards, place the appropriate detergent and softener into your machine's detergent drawer. Start your machine by pressing the Start/Pause/Cancel button. The Start/Pause/Cancel key's LED will be on. After your machine starts, you can follow from the program progress display at which step your machine is.

Program selection table

Program Type of laundry		Max Load (kg)	Program Duration (min.)	Water Con-sumption (lt)	Energy Con-sumption (kWh)	express Ex-press	Rinse Plus	Anti-Creasing
Prewash + Cotton 90	Heavy soiled Durable fabrics made of cotton and linen	6 160	60 2.60			●	●
Cotton 90	Heavy soiled Durable fabrics made of cotton and linen	6 150	55 2.00			●	●	●
Cotton 60'	Normal soiled cotton and linen durable to heat	6 140	49 1.14			●	●	●
Cotton 40	Less soiled cotton and linen sensitive to heat	6 125	49 0.70			●	●	●
Cotton cold	Heavy soiled Durable fabrics made of cotton and linen	5 120	55 0.21			●	●	●
Baby 65	Heavy soiled Durable fabrics made of cotton and linen (baby clothes etc.)	6 170	65 1.40
Prewash = Synthetic 60	Heavy soiled cotton/synthetic blended durable to heat	3 125	60 1.00			●	●
Synthetic 60	Normal soiled cotton/synthetic blended durable to heat	3 115	55 0.90			●	●	●
Synthetic 40	Less soiled cotton/synthetic blended durable to heat	3 105	55 0.50			●	●	●
Synthetic cold	Very Less soiled or cotton/synthetic blended sensitive to heat	2.5	90 55	0.12		●	●	●
Mix 40	Normal soiled cotton and linen sensitive to heat	3.5	95	55 0.50		●	●
Delicate 40	Delicate, sensitive synthetic, cotton blended	2 70	60 0.35				●	●
Delicate 30	Delicate, sensitive synthetic, cotton blended	2 65	60 0.25				●	●
Woolen 40	Woolen and delicate blended with machine wash label	1.5	55	55 0.30			●
Woolen cold	Woolen and delicate laundry with machine wash sign	1.5	45 55	0.03			●
Handwash 30	Special program for silk, cashmere or laundry with no machine wash sign	1	40	35 0.18
Mini 30	Special program for Less soiled linens	2.5	30 45	0.25
Rinse	Rinse Program	6	23 13	0.04
Spin	Spin Program	6 13		0.03

* Energy Labelling Program (EN 60456)

2 Technical Features of Your Washing Machine

Model WMD 26121 T		WMD 26101 T
Maximum dry laundry capacity (kg.) 6		6
Height x Width x Depth (cm.) 84 x 60 x 54		84 x 60 x 54
Net Weight (kg.)	70	70
Electricity (V/Hz.) 230/50		230/50
Total Current (A) 10		10
Total Power (W) 2200		2200
Washing -rinsing cycle (cyc/min) 52		52
Spinning cycle (max cyc/min) 1200		1000

There may be changes in the technical features without prior notice in order to enhance product quality.

The figures in the manual are schematic and may not represent your actual machine one-to-one.

Labelling on your product and ones declared in the documents accompanying the product are the values obtained under laboratory conditions with given standards. These values may vary according to usage and environmental conditions.

3 Warning

• This product is designed for home use. - If the fuse in your house is less than 16A, have a certified electrician install a 16A fuse. - In case of transformer or non-transformer use, grounding installation must be performed by a licensed electrician. Any use before grounding is not our responsibility. - Please call certified service for a failure of electric plug/cable. - Never place your machine over a carpet-covered floor. - At first use, washing must be performed at Cotton 90°C program without loading laundry to get your machine ready for washing. - Performance of your washing machine depends on the quality of water and hygiene compound used. If low quality and insufficient cleaning material is used, the stains will be fixed. - Because of quality control procedures, there might be a little amount of water in your machine. This does not cause any damage to your machine. - Your machine is programmed to start operation again when electricity is off and on afterwards. You cannot press On/Off button to cancel the program. The machine will continue the program when electricity is on. To CANCEL the program, press the Start/Pause/Cancel button for three seconds. (See. Cancelling a program) - After your machine starts operation, if the Start/Pause/Cancel key starts blinking, then the door is not locked. Open and close the door again to begin the washing program again. - If the "washing" LED on the program progress display is blinking, either there is no water or the tap is off. Check your taps. Turn your machine off and on. If the problem persists, unplug your machine, turn off tap water, and call authorized service. - If the program is started and program selection cannot be performed, your machine might be in protection mode due to infrastructure problems (voltage, water pressure, etc.). Press and hold the Start/Pause/Cancel button for 3 seconds to switch the machine to factory settings.

4 Preparation

Before starting your machine, please be aware of the following points:

Did you plug the cable?

Did you connect the draining hose correctly?

Did you close the front door?

Did you open the tap water?

Sorting the Laundry

Sort laundry according to type of fabric, color, level of dirtiness, and allowed washing temperature. Do not wash white laundry together with colored ones. Remove hard parts like belts, wrist buttons, curtain buttons, etc., or place laundry in a cloth bag. Empty pockets. Zip up and button up. Very tiny laundry like baby clothes may get into the inside of the drum, midst of bellow, pump filter, hose, etc. To prevent this, it is advised to place such laundry in a special laundry string bag or large laundry. Your machine can wash "Machine Wash" or "No-matting" labeled woolen with a special woolen program. Delicate laundry with "Do not wash" or "hand wash" labels (silk, cashmere, pure wool, etc.) can be washed in the special hand-wash program.

Opening front door

Pull the handle to open the front door. Your machine's front door is designed to be opened only when the machine is not operating. If the LED displays "door", then the door can be opened.

Loading the machine with laundry

Fill the machine by unfolding and not squeezing the laundry. Place hand-woven garments inside-out in the machine. Make sure there is no laundry jammed between the bellow and the front door. Close the loading door by pushing. If the loading door is not properly closed, the machine will not start.

Selection of detergent and softener

The quantity of detergent used depends on the hardness of the water and how soiled the laundry is. Recommended values are indicated on the package. If your laundry is lightly soiled and/or the water hardness is low, use less detergent than indicated on the package. Otherwise, it may result in excessive foam.

You should use detergent specially designed for automatic washing machines. Avoid using bleach products containing sulfur or chlorine. Place powder detergent and softener in the appropriate drawer compartments and close the detergent dispenser.

a. Powder detergent drawer for pre-wash. b. Powder detergent drawer for main wash. c. Softener dispenser. d. Siphon.

Fill the softener as indicated (usually <100ml; 1 tea bag) on the package. Never fill more than the "MAX" level. Excess amount will drain to the suction cup and be wasted. You might need to fill the softener again. If the softener has thickened over time, add some water for thinning. Softener may obstruct the siphon and block the flow.

Auxiliary Functions

Express: Shortens washing time for lightly soiled fabrics. This function can be used for cotton and synthetic programs for temperatures below 60°C.

Rinse plus: By using this function, your machine will add another rinse process to the three rinse processes it has already done. This additional rinse will reduce any effects on sensitive skin by washing away leftover detergent.

Anti-creasing: To avoid wrinkling of your clothes, select this function. When anti-creasing is chosen, please load less cloth. This way, a special washing and spinning profile will reduce wrinkles and your clothes will be easy to iron.

Spin speed selection knob: You can spin the laundry up to 1200 cycles/min with the models having cycle selection button. Your machine will spin not more than 800 cycles/min for synthetic programs and 600-400 cycles/min for woollen programs. In addition, if you do not want to spin your laundry, you may choose the "No Spin" position.

Pressing "On/Off"

By pressing the "On/Off" button, you can make your machine ready for selecting a program. When the "On/Off" key is pressed, the "door" LED will light on, meaning "door can open". Press the "On/Off" key again to turn your machine off.

Pressing "On/Off" does not mean the program has started. You must press "Start/Pause/Cancel" to start the program.

Child-proof lock

To prevent children from affecting the program progress by pressing keys during washing, there is a child-proof lock. To enable the child-proof lock, after washing begins, press the Express and Rinse Plus function buttons together simultaneously for three seconds. The Pre-wash additional function LED will blink continuously.

After the program ends, to start a new program or alter the program, you must disable the child-proof lock. To do this, press the same buttons for three seconds, and the Child-proof lock LED will turn off.

Function Selection

Additional functions that can be selected according to the selected program can be chosen by pressing the related key. The LED of the selected function will turn on.

Some additional functions cannot be selected together. For example, when using the cotton program, the Express and Rinse Plus auxiliary functions cannot be selected together. After selecting the Express program, if the Rinse Plus key is pressed quickly, the program will be on and the Express function LED will turn off.

Program Progress

After the machine starts operation, the relevant program LED on the program progress display will turn on. When a step is completed, that step's LED turns off and the next step's LED turns on. When the program is completed, the "Door" LED will turn on again.

During machine operation, you can press the "Start/Pause/Cancel" key to put the machine in "Pause" mode. In this case, the "Start/Pause/Cancel" LED will blink.

Changing Program

You can use this feature to wash laundry in the same textile group at lower or higher temperatures. For example, instead of Cotton60, Cotton40 can be used. To select Cotton40 instead of Cotton60, press the "Start/Pause/Cancel" key to switch the machine to pause position. Then turn the program knob to select the Cotton40 program.

Even if the program selection knob is changed during the program, the initially selected program will be executed. To change

Care and maintenance

Detergent Dispenser

Powder detergent residue may accumulate in the drawer after a while. To clean the detergent drawer, press the marked point of the siphon on the softener compartment and pull the drawer towards you. Wash the drawer with water.

Siphon

Do not neglect cleaning the suction cup when it becomes soiled. To take the suction cup out, first take the detergent drawer out. Clean it to eliminate blocking by softener residue. After cleaning,

the washing program must be cancelled if it is still continuing.

Selected auxiliary functions must be compatible with the washing program.

Adding laundry

If you want to add laundry to your machine after the program begins, press the Start/Pause key to switch the machine to pause mode. If the water level in the machine is appropriate, the "door" LED on the program progress display will be on, and laundry can be added to the machine. If the "door" LED is not on after one minute, then the water level in the machine is not appropriate, and laundry cannot be added. You can press the "Start/Pause/Cancel" key to continue the program.

Time delay for program start

Using the time delay key, you can delay the

3h

6h

•

9h

start

hour

Wh

3hc

on. If the same key is pressed once more, the delay is 6 hours, and if it is pressed once more, 9

hours delay is selected. If the time delay key is pressed again, the delay is cancelled. After the selection of time delay, when "Start/Pause/Cancel" is pressed, the program can be started with delay. During the delay period, the door can be opened or laundry can be added. After time delay is initiated by pressing "Start/Pause/Cancel", you can switch the machine to "Pause" mode and change the delay time.

Canceling a Program

To cancel a program, the "Start/Pause/Cancel" key is pressed for

three seconds. After this period, "Start/Pause/Cancel" and all other LEDs will be off. You can select a new program and start washing.

If the cancel task is performed during washing, the "Spin" LED on the display will light on, the machine will pump, and when the "Spin" LED is off, the "door" LED will be on, the door can be opened, and a new pro-

gram can be selected.

After the machine starts operation, even if the spin speed or washing temperature is changed, the initial speed and temperature are valid. In order to change the spin speed or temperature, after pressing "Start/Pause/Cancel", a new cycle or temperature can be selected.

End of Program

When the program ends, the "door" LED will light on, and the door can be opened, and the machine is ready for the next washing. Press "On/Off" to turn the machine off.

Emptying Laundry

After the program ends, the machine automatically stops. Turn off the tap water. Pull the handle and open the loading door. Turn off your machine by pressing "On/Off". After taking the laundry out, keep the loading door open and let the drum ventilate. Check the bellow and clean.

place the suction cup to its place and make sure it is placed properly.

Water Inlet Filters

There is a filter at each end where the water inlet hose is connected to the tap and at each of the water inlet valves placed behind the machine. These filters block the entrance of foreign objects and dirt into the machine. Filters must be cleaned regularly to avoid clogging. To do this, turn off the tap water. Pull out the water inlet hoses. Clean the top of the water inlet valve filter with a brush. If the filters are extremely clogged, you can pull them out with pliers. You can take out the tap side of the water inlet hoses with its seal and clean it with tap water.

Hose

There is a risk of freezing in cold regions. If your machine is placed in a cold place, remaining water in the hoses must be drained with the pump filter when the machine is not used. Water inlet hoses can be drained by taking them out from the tap.

Cleaning Pump Filter

There is a filter system that maintains the long lifetime of the pump by blocking foreign objects like buttons or cloth fibers from entering the pump during the drain of washing water. It is useful to clean the filter when it is soiled. To do this:

Unplug your machine. Open the filter at the bottom right corner by pressing the marked space on the lid. Hot water risk: There might be 15 liters of 90°C hot water in the drum. Open the filter carefully.

Before opening the filter, drain the water with the drain hose. Pull out the drain hose from its place. Prepare a suitable container and open the tap of the hose. After the water is drained, place the tap properly. Open the filter by turning and drain the remaining water (max 30 ml) into the filter tap. Clean remaining foreign objects in the filter. When finished, turn it clockwise and close. Close the filter tap by pushing.

If the filter and hose tap do not fit, it leaks water.

6

1. Removing the transportation safety bolts Before the washing machine is operated, the transit bars must be removed! To do this:

1. Loosen "C" bolts by rotating them counterclockwise with a suitable spanner.
2. Remove transportation safety bolts by turning.
3. Place the "P" plastic covers onto the openings of the transportation locks by rotating them in the direction of the arrow and pushing.

Attention please! Keep the transit safety bolts for use when the machine is to be transported again. Always transport your machine with the transportation locks.

2. Leveling the feet

In order to operate your machine without noise and vibration, it must be properly balanced. The four feet of your machine can be adjusted. First loosen the plastic counter bolt. Tighten the counter bolt after adjusting the feet for leveling your machine.

3. Water Connections

a) Water Inlet Hose: Your machine is connected to the water supply by special hoses supplied with the machine.

There are plastic seals on the hose or in the plastic bag for eliminating any leakage at connection points. These seals must be used on each side of the connection. Seals on the machine side must be

connected to the water inlet.

After connecting the hose, check all connections for leaks. In order to eliminate any risk due to water leakage, keep the taps off when the machine is not used.

Your machine will operate efficiently if the water from the tap is minimum 1 and maximum 10 bars. Practically, 1 bar means 8 liters of water in one minute when the tap is fully on.

Connect the hose to the machine. Tighten bolts with hand power, do not use a spanner.

Do not connect a single inlet machine to hot water. If the machine is connected with a Y part to a double inlet and over 40°C for single inlet machines, the machine may switch to protection mode.

b) Water drain hose: The water drain hose could be placed either at the side of the bath tub, or directly to the drain. The hose should not be bent. The water drain hose should be secured with the holder so that it would not fall down on the ground.

The hose should be placed between 40 and 100 cm from the ground. The water drain hose could be placed directly to the drain water inlet.

4. Electrical connection

Connect the power cord to an appropriate electrical system that supports the maximum voltage and current rating indicated on the rating plate placed on the washing machine.

See page 1, Steps before operating the fully automatic washing machine and safety precautions. Make sure that you have a grounded power outlet.

7

Before calling service: You turned the machine on, but the LEDs on the panel are off.

Check the grounding on the power cable or a blown fuse. Check the front door for proper closure.

Check the grounding on the power cable or a blown fuse. Check the front door proper closure.

Check the front door for proper closure. Either taps are closed or water intake filters are clogged.

Check the front door for proper closure. Either taps are closed or water intake filters are clogged.

Check if the discharge hose is placed as described in the user's manual or not.

Check if the discharge hose is placed as described in the user's manual.

Check the water intake and drain hoses. Tighten the connections. The washers of the hoses may be worn out. If neither of these, the pump filter is not closed properly.

Check the water intake and drain hoses. Tighten the connections. The washers of the hoses may be worn out. If neither of the two, the pump filter is not closed properly.

Check whether your detergent is suitable for automatic machines. Next time use less detergent.

Check whether your detergent is suitable for automatic machines. Next time use less detergent.

Pump does not drain water.

Clean the pump filter. Check whether the drain hose is bent or not. If there is need to clean the pump filter, refer to the pump filter cleaning section of the manual.

Warning!

Program selection table

Program Vrsta rublja			Maks. pun- jenje (kg)	Trajanje pro- grama (mln.)	Potroš- nja vode (lt)	Pot- rošnja energilje (kWh)	express Brzo pranje	Ispiran- je plus	Protu- gužvanje
♀	Pretpranje + pamuk 90	Vrio zaprijane izdržljive tkanine od pamuka i platna	6 160	60 2.60				●	●
♀	Pamuk 90	Vrio zaprijane izdržljive tkanine od pamuka i platna	6 150	55 2.00			●	●	●
♀	Pamuk 60 *	Normalno zaprijano pamučno i platneno rublje otporno na vrućinu	6 140	49 1.14			●	●	●
♀	Pamuk 40	Manje zaprijano pamučno i platneno rublje osjetljivo na vrućinu	6 125	49 0.70			●	●	●
♀	Pamuk hladno	Vrio zaprijane izdržljive tkanine od pamuka i platna	5 120	55 0.21			●	●	●
♂	Baby 65	Vrio zaprijane izdržljive tkanine od pamuka i platna (dječja odjeća, itd.)	6	170	65	1.40
♂	Pretpranje + sintetika 60	Vrio zaprijane tkanine mješavina pamuka i sintetike, otporne na toplinu	3	125	60	1.00	●	●
♂	Sintetika 60	Normalno zaprijane tkanine mješavina pamuka i sintetike, otporne na toplinu	3	115	55	0.90	●	●	●
♂	Sintetika 40	Manje zaprijane tkanine mješavina pamuka i sintetika, otporne na toplinu	3	105	55	0.50	●	●	●
♂	Sintetika hladno	Vrio malo zaprijane tkanine mješavina pamuka i sintetike, osjetljive na toplinu	2.5	90	55	0.12	●	●	●
	Mix 40	Normalno zaprijano pamučno i platmono rublje otporno na toplinu	3.5	95	55	0.50	●	●
♂	Fino 40	Fine, osjetljive tkanine mješavina sintetike i pamuka	2	70	60	0.35		●	●
♂	Fino 30	Fine, osjetljive tkanine mješavina sintetike i pamuka	2	65	60	0.25		●	●
♂	Vuna 40	Vunene i fine mješavine s etiketom za strojno pranje	1.5	55	55	0.30		●
♂	Vuna hladno	Vuneno i fino rublje s oznakom za strojno pranje	1.5	45	55	0.03		●
♂	Ručno pranje 30	Poseban program za svilu i kašmir ili za rublje bez oznake za strojno pranje	1	40	35	0.15
	Mini 30	Poseban program za manje zaprijane tkanine	2.5	30	45	0.25
♂	Ispiranje	Program za ispiranje	6	23	13	0.04
♂	Centrifuga	Program za centrifugu	6	13	-	0.03
♂	Pumpu	Programa Pumpu	-	2	-	-

2 Technical specifications of your washing machine

Modeli	WMD 26121 T	WMD 26101 T
Maksimalan kapacitet suhog rublja (kg) 6		6
Visina x Širina x Dubina (cm) 84 x 60 x 54		84 x 60 x 54
Neto težina (kg)	70	70
Električna struja (V/Hz) 230/50		230/50
Ukupna struja (A) 10		10
Ukupna snaga (W) 2200		2200
Ciklus pranje-ispiranje (cik./min) 52		52
Ciklus centrifuge (maks. cik./min) 1200		1000

To cancel the program, press the 'Start/Pause/Cancel' button for three seconds. After that time, the 'Start/Pause/Cancel' indicator light and all others will turn off. You can select a new program and start washing.

Hose

Before opening the filter, drain the water using the drain hose. Remove the drain hose from its housing. Prepare a suitable container and open the hose tap. After the water has drained, replace the tap correctly. Open the filter by turning it and drain the remaining water (max. 30 ml) into the filter. Clean any remaining foreign objects from the filter. When finished, turn it clockwise and close. Close the filter tap by pushing it.

Caution!

Program selection table

Danger of hot water: There might be 15 liters of 90°C hot water in the drum. Open the filter carefully.

Warning!

Attention!

Program cancellation

Program selection table

Water inlet filters

Child lock

Attention!

Program selection table

Program Tip veša		Maks punjenje (kg)	Trajanje programa (mln)	Potrošnja vode (lit)	Potrošnja struje (kWh)	express Brzo pranje	Dopunsko lspiranje	Protiv gužvanja
Pretpranje + pamuk 90 Veoma	prljave izdržljive tkanine od pamuka ili lana	6 160	60 2.60			•	•
Pamuk 90 Veoma prljave izdržljive	tkanine od pamuka ili lana	6 150	55 2.00			• •	•
Pamuk 60° Normalno prljavi pamuk i lan, otporni na toplinu		6 140	49 1.14			• •	•
Pamuk 40 Manje prljavi pamuk i lan, osetljivi na toplinu		6 125	49 0.70			• •	•
Pamuk hladno Veoma prljave izdržljive	tkanine od pamuka ili lana	5 120	55 0.21			•	• •
Baby 65	Veoma prljave izdržljive tkanine od pamuka ili lana (odeća za bebe i dr.)	6	170	65	1.40		■
Pretpranje + sintetika 60	Veoma prljave mešavine pamuk/sintetika, otporne na toplinu	3	125	60	1.00	•	•
Sintetika 60	Normalno prljave mešavine pamuk/sintetika, otporne na toplinu	3	115	55	0.90	• •	•
Sintetika 40	Manje prljave mešavine pamuk/sintetika, otporne na toplinu	3	105	55	0.50	• •	•
Sintetika hladno	Veoma malo prljave mešavine pamuk/sintetika, osetljive na toplinu	2.5	90	55	0.12	• •	•
Mix 40	Normalno prljavi pamuk i lan, osetljivi na toplinu	3.5	95	55	0.50	•	• •
Osetljivo 40	Delikatna, osetljiva sintetika, mešavina pamuka	2	70	60	0.35		•	•
Osetljivo 30	Delikatna, osetljiva sintetika, mešavina pamuka	2	65	60	0.25		•	•
Vuna 40	Vuna i delikatne mešavine sa oznakom za mašinsko pranje	1.5	55	55	0.30		•
Vuna hladno	Vuna i delikatni veš sa oznakom za mašinsko pranje	1.5	45	55	0.03		•
Ručno pranje 30	Specijalni program za svilu, kašmir ili veš bez oznake za mašinsko pranje	1	40	35	0.15
Mini 30	Specijalni program za manje prljavo rubije	2.5	30	45	0.25
Ispiranje	Program ispiranja	6	23	13	0.04
Centrifuga	Program centrifugiranja	6	13	-	0.03
Pumpa	Program pumpe	-	2	-	-

* Consumption marking program (EN 60456)

2 Technical characteristics of your washing machine

Modeli	WMD 26121 T	WMD 26101 T
Maksimalni kapacitet suvog veša (kg) 6		6
Visina x Širina x Dubina (cm) 84 x 60 x 54		84 x 60 x 54
Neto težina (kg) 70		70
Napajanje (V/Hz) 230/50		230/50
Ukupni napon (A) 10		10
Ukupna snaga (W) 2200		2200
Ciklus pranje - ispiranje (cyc/min) 52		52
Ciklus ceđenja (maks. cyc/min) 1200		1000

3 Warning

Child lock

Cleaning the pump filter

There is a filtering system that, during the discharge of washing water, blocks the entry of foreign objects, such as buttons, fabric fibers, into the pump and thus maintains a long working life of the pump. It is advisable to clean the filter when it is dirty.

To do this:

Unplug the machine. Press the marked place on the cover to open the filter located in the lower right corner.

Before opening the filter, drain the water using the drain hose. Pull the drain hose out of its place. Prepare a suitable container and open the hose branch. After draining the water, properly return the branch to its place. Turn to open the filter and drain the remaining water (max 30ml) through the filter on the branch. Remove any remaining foreign objects from the filter. When done, turn clockwise and close. Close the filter branch by pressing.

Caution!

Program selection table

Child lock

Program cancellation

Water inlet filters

If the filter plug and hose do not fit properly, water will leak through them.

6 Installation