SWKD 2400 A1 - Kettle SILVERCREST - Free user manual and instructions

Product Type	Electric Kettle
Model	SWKD 2400 A1
Brand	SilverCrest
Power Consumption	2400 W
Capacity	1.7 L
Dimensions (approx.)	25 x 20 x 20 cm
Weight (approx.)	1.0 kg
Material	Plastic body, stainless steel heating element
Power Base	360° cordless base with cord storage
Boil-Dry Protection	Yes, automatic shut-off when water level is too low
Auto Shut-Off	Yes, after water reaches boiling point
Lid Opening	One-button push-open lid
Water Level Indicator	Transparent window with markings on both sides
Filter	Removable limescale filter at spout
Operating Voltage	220-240 V, 50/60 Hz
Cleaning	Wipe exterior with damp cloth; descale interior regularly with vinegar or citric acid
Safety Features	Overheat protection, automatic power-off when removed from base
Spare Parts Availability	Contact SilverCrest customer service for replacement lid, base, or filter
Warranty	3 years (standard)
Manual Languages	DE, EN, and others upon request

Frequently Asked Questions - SWKD 2400 A1 SILVERCREST

How do I clean the kettle?

Unplug the kettle and let it cool. Wipe the exterior with a damp cloth. For interior descaling, fill half with water and add a tablespoon of vinegar or citric acid, boil, let sit for 15 minutes, then rinse thoroughly.

What is the capacity of the SilverCrest SWKD 2400 A1?

The kettle has a capacity of 1.7 liters, suitable for up to 7 cups of water.

Why does the kettle turn off before boiling?

This may be due to boil-dry protection activating if there is insufficient water. Ensure the water level is above the minimum mark. If the problem persists, descale the kettle.

Can I use the kettle without the filter?

The limescale filter is removable for cleaning but should be in place during use to reduce particles in your drink. Operating without it is possible but not recommended.

How do I replace the filter?

The filter is located at the spout. Gently pull it out for cleaning or replacement. Contact SilverCrest for spare filters.

What does the auto shut-off feature do?

The kettle automatically switches off once the water reaches a rolling boil, preventing overboiling and saving energy.

Is the kettle suitable for use on a 220V system?

Yes, the SilverCrest SWKD 2400 A1 operates on 220-240V, 50/60 Hz. Do not use with other voltages unless a proper voltage converter is used.

How can I prevent limescale buildup?

Regular descaling with a mild acidic solution (vinegar or citric acid) is recommended. Use filtered water to reduce scale formation.

The kettle does not stay on the base properly. What should I do?

Ensure the base is on a flat, dry surface and the kettle is centered. Check for debris on the connectors. If the issue continues, contact customer service.

Can I boil milk or other liquids in the kettle?

No, this kettle is designed for water only. Boiling other liquids can damage the appliance and void the warranty.

USER MANUAL SWKD 2400 A1 SILVERCREST

Digital Kettle SWKD 2400 A1

TARGA GMBH

Conserving A5 50494 SOBET

GERMANY

Operating instructions and safety instructions

DE.

English....2

Deutsch 21

Table of contents

1. Intended use.... 3
2. Package contents .... 4
3. Technical data .... 5
4. Safety instructions .... 5
5. Copyright 11
6. Before initial use.... 11
7. Initial use.... 11 7.1. Boiling the water 12
8. Maintenance/cleaning.... 15 8.1. Descaling the pot (3) 15 8.2. Cleaning the limescale filter (2) 16 8.3. Storing the device when not in use 17
9. Troubleshooting 17
10. Environmental and waste disposal information.... 18
11. Marks of conformity.... 18
12. Warranty information .... 19

Congratulations!

By purchasing the SilverCrest SWKD 2400 A1 wireless, digital kettle, hereinafter referred to as kettle, you have opted for a high quality product.

Familiarise yourself with the kettle before using it for the first time and read these operating instructions carefully. Observe the safety instructions and only use the kettle in the manner described in these operating instructions and for the indicated fields of application.

Keep these operating instructions in a safe place. Hand over all documents in the event that you pass on the kettle to a third party.

1. Intended use

This kettle is a household device and is only intended for heating water. It must not be used outside of closed rooms or in regions with a tropical climate. The kettle is not intended for business or commercial use. Use the kettle solely for private purposes in living areas; any other use is deemed improper. The kettle meets the requirements of all relevant standards related to CE conformity. Compliance with these standards is no longer guaranteed if a change is made to the kettle without the authorisation of the manufacturer. The manufacturer shall not be liable for any damages or faults arising as a result. Only use the accessories provided by the manufacturer.

Please observe the national regulations and/or laws of the country in which the body trimmer is used.

2. Package contents

Unpack the kettle and all of the accessories. Remove all packaging materials and check all of the components for completeness and signs of damage. If any parts are missing or damaged, please contact the manufacturer.

• SilverCrest SWKD 2400 A1 digital kettle - Device base • These operating instructions

These operating instructions also have a cover that can be unfolded. The inside of the cover provides a schematic of the SilverCrest digital kettle SWKD 2400 A1 and all controls. This cover page can remain unfolded while you read other sections of the operating instructions. This provides you with a reference to the controls at all times. The numbers identify the following parts/functions:

1 Lid release button
2	Limescale filter
3	Pot
4 Water level gauge
5 Base (with integrated cable rewind)
6	Power cable
7	Handle
8	Keep-warm buttonIII
9	On/off buttonO/I
10	+ button+
11	- button◀
12	Display
13	Lid

3. Technical data

Manufacturer TARGA GmbH
Designation SilverCrest SWKD 2400 A1
Power supply	220-240 V~, 50/60 Hz
Power consumption 2,000-2,400 W
Length of power cable (6) 75 cm
Capacity 0.5 (minimum) to 1.7 (maximum) litres
Display indicators Status display when pot (3) is switched on
Protection class	I
Dimensions (H x W x D) Approx. 264 x 153 x 234 mm (total)
Weight Approx. 1,050 g (total)

The specifications and design are subject to change without notice.

4. Safety instructions

Before using the device for the first time, please read the following instructions carefully and observe all warnings, even if you are familiar with using electronic and household devices. Keep these operating instructions in a safe place for future reference. If you give the device away or sell it, please ensure that you also pass on this manual. They are part of the device.

Explanation of symbols used

DANGER! This icon, together with the word 'Danger', indicates an impending dangerous situation that, if not prevented, can lead to serious injuries or even death.

WARNING! This icon indicates important information for the safe operation of the kettle and user safety.

DANGER! This icon indicates impending danger to health due to an electric shock, which may result in a risk of death and/or damage to property.

DANGER! This icon indicates impending danger of scalding.

This icon indicates products that have been tested in relation to their physical and chemical composition and that in accordance with EC 1935/2004 have been regarded as harmless to health in terms of contact with foodstuffs.

This icon indicates that the base (5) and the underside of the pot (3) need to be kept away from water.

This icon indicates that further information on the topic is available.

Foreseeable misuse

• Only heat the pot (3) with the base (5) developed for this purpose. Do not under any circumstances place it on a hob to heat it and do not use the base of any other kettle.
• Do not use the pot (3) for other liquids; only use it for drinking water.

- Always use fresh drinking water. Do not drink water that has been in the pot (3) for longer than an hour. Do not reheat water that has cooled down. Always pour away old water. Otherwise germs may form.

The kettle should not be operated with an external timer or a separate remote control system.

Children and people with disabilities

- This device may be used by children aged eight and over and by people with reduced physical, sensory or mental abilities or who lack experience and knowledge, provided that they are supervised or have been instructed in the safe use of the device and understand the resulting dangers.

• Children must not play with the device.

- Cleaning and maintenance by the user may not be performed by children, unless they are over eight years of age and supervised.

- Children under eight years of age are to be kept away from the device and the power cable (6).

DANGER! The packaging material is not a toy. Children must not play with the plastic bags. There is a risk of suffocation.

Store the appliance out of reach of children.

General safety instructions

DANGER of burn injuries

• Never touch the housing of the pot (3) during and immediately after operation. Only use the handle (7) to hold or carry the pot (3).
• Hot steam is released when the water boils. Make sure not to burn yourself. Wear an oven glove, if necessary. Turn the pot (3) so that the steam is directed away from you.
• Only clean the pot (3) once it has cooled down completely.
• Fill the pot (3) with a maximum of 1.7 litres of water. Refer to the water level gauge (4). If you pour in too much water, it can boil over and cause burn injuries and damage to property.
• Only boil the water with the lid (13) closed. Otherwise water can escape and cause burn injuries and damage to property.
• Do not open the lid (13) while the water is being heated.

WARNING of damage to property

- Only use the pot (3) with the corresponding base (5).

- Do not put any objects on the base (5).

- Only operate the kettle on a flat, stable and fire-proof surface. If the kettle is not placed on a level surface, it can tip over due to the movement of the boiling water and cause

damage to property and under certain circumstances may also cause burn injuries.

- Never leave the kettle unattended when in use.

- Unplug the plug from the socket when the kettle is unattended.

DANGER of electric shock

- The power cable (6) must not be damaged. Never replace a damaged power cable (6). Instead contact the service department (see 'Warranty information' section). If the power cable (6) is damaged, there is a risk of electric shock.

- Never open the housing of the base (5), as this does not contain any parts to be maintained. If the housing is open, there is a risk of electric shock.

- If you notice any smoke, unusual noises or smells, switch off the kettle immediately and remove the plug from the socket. If this happens, you must stop using the kettle until it has been checked by a specialist. Do not inhale smoke possibly caused by a burning device. If you have inhaled smoke, consult a physician. Inhaling smoke can be harmful to your health.

- Ensure that the power cable (6) cannot be damaged by sharp edges or hot surfaces. Always wrap the power cable (6) around the cable rewind under the base (5) after use.

• Ensure that the power cable (6) is not jammed or squashed.
• The device must always be disconnected from the mains if left unattended, prior to assembly and disassembly or cleaning.

- Never remove the plug from the socket by pulling the power cable (6); only ever pull the plug.

- If you find visible damage on the kettle or the power cable (6), switch off the kettle immediately, remove the plug from the socket and contact the service department (see 'Warranty information' section).

- Only plug the base (5) into a power socket that is properly installed and easily accessible and whose mains voltage corresponds with the rating plate specifications. Following connection, the power socket must continue to be easily accessible so that the plug can be quickly removed in an emergency.

- Never immerse the base (5) in water or any other liquid. If liquid enters into the base (5), remove the plug from the socket and contact the service department (see 'Warranty information' section).

DANGER of fire

Fill the pot (3) with a minimum of 0.5 litres of water. If you do not pour in enough water, there is a risk of fire or overheating.

Keep the kettle at least 50 cm away from flammable and combustible materials. There is a risk of fire.

5. Copyright

All contents of these operating instructions are subject to copyright law and are provided to the user solely as a source of information. Any form of copying or reproduction of data and information without the express written permission of the author is prohibited. This also concerns commercial use of the content and data. The text and illustrations correspond to the technical standards at the time of printing. Subject to alterations.

6. Before initial use

Remove the kettle and all accessories from the packaging and check the completeness of the delivery. Remove the protective film. Keep the packaging material away from children and dispose of it in an environmentally-friendly manner.

7. Initial use

Before you prepare water for consumption for the first time, you must first clean the pot (3) in order to remove dust and any remnants of the packaging material. Proceed as follows to clean the pot:

1. Open the lid (13) by pressing the lid release button (1) and rinse the pot (3) with clear water.
2. Fill the pot (3) with drinking water up to '1.7 | MAX' on the water level gauge.
3. Close the lid (13) by pressing it down until it snaps into place. Boil the water once (see 'Boiling the water' section) and pour it away.

Repeat steps 1–3. The pot (3) is now clean and disinfected. You can now use the pot (3).

7.1. Boiling the water

DANGER of electric shock

Keep the base (5) away from water. There is danger of electric shock.

WARNING

Boil the water and pour it away twice before you use the kettle for the first time (see the previous section on 'Initial use').

WARNING

Always use fresh drinking water. Do not drink water that has been in the pot (3) for longer than an hour. Do not reheat water that has cooled down. Always pour away old water. Otherwise germs may form.

Water should not be kept in the pot for longer than an hour, especially when using the keep-warm function at low temperatures, since there is a high risk of germs forming at these temperatures.

Cable rewind

An integrated cable rewind is located on the underside of the base (5). You can adapt the length of the power cable (6) to the conditions at the location where you are using the kettle.

You can minimize the length of the cable when you are not using the kettle.

• Unwind the power cable (6) on the underside of the base (5). - Place the base (5) on a flat, non-slip, and dry surface. Make sure that the power cable (6) passes through the opening on the underside of the base (5). This is to ensure that the kettle is positioned securely.

WARNING

If the power cable (6) does not pass through the opening on the underside of the base (5), the base (5) and pot (3) are not positioned securely. The movement of the boiling water can make the kettle tip over and cause serious damage to property and cause injuries!

- Open the lid (13) by pressing the lid release button (1).

- Fill the pot (3) with drinking water up to a minimum of '0.5 | MIN' and a maximum of '1.7 | MAX' on the water level gauge (4) and close the lid (13) by pressing it down until it snaps into place.

You can freely rotate the pot (3) around its vertical axis when you place it on the base (5). The pot does not need to be locked into a particular position. This way, you can turn the pot (3) so that the water level gauge (4) is easy to see or to direct the steam away from you.

- Plug the connector into a power socket, which is always easily accessible.

- Place the pot (3) onto the base (5).

- Press the on/off button ON (9) in order to switch on the pot (3). The number 100 flashes in the display (12), indicating the target temperature of 100°C, and the heating process begins. You can adjust the target temperature in increments of 5°C between 40°C and 100°C by pressing the ◀ (11) or ▶ (10) buttons. You can stop the heating process at all times by pressing the on/off button OK?

- Otherwise, you can also proceed as follows: Select the desired target temperature by pressing the ◀ (11) or ▶ (10) buttons and then press the on/off button (9) in order to start the heating process.

- The kettle is illuminated and the selected target temperature flashes on the display when the water is being heated. Furthermore, the kettle makes a noise. The noise is not due to a malfunction.

DANGER of burn injuries

Turn the pot (3) so that the steam is directed away from you. Otherwise you could burn yourself.

Only boil the water with the lid (13) closed. Otherwise the pot (3) can tip over and cause burn injuries and damage to property.

As soon as the water reaches the selected target temperature, this continuously flashes in the display (12).

If the keep-warm function is not activated, the display (12) automatically switches off after approx. three minutes.

The keep-warm function allows you to keep heated water at a certain temperature for a longer period of time. As soon as the water temperature in the pot (3) drops by a certain level below the selected target temperature, the pot automatically begins heating again to the selected temperature. The keep-warm function only works for a temperature range of 40°C to 90°C.

Press the keep-warm button (8) in order to activate the keep-warm function for the selected target temperature. You can also adjust this target temperature to a value between 40°C and 90°C in increments of 5°C by pressing the (11) or (10) buttons. The icon flashes next to the degree sign on the right side of the display (12) when the keep-warm function is activated. The display (12) is lit up in blue and the selected target temperature flashes while the water is being heated. As soon as the water reaches the selected target temperature, this continuously flashes in the display (12). You can deactivate the keep-warm function at all times by pressing the on/off button (1P) or the keep-warm button (2). The keep-warm function lasts for a maximum of two hours. The pot (3) then automatically switches off.

As soon as the pot (3) is lifted off the base (5), the pot automatically switches off and the display (12) goes out.

Pull out the power cable (6) plug from the socket after the heating or keep-warm process is complete. Remove the pot (3) from the base (5) and pour away the water.

DANGER of burn injuries

Never touch the housing of the pot (3) during and immediately after operation. Only use the handle (7) to hold or carry the pot (3).

Hot steam is released when the water boils. Make sure not to burn yourself.

Wear an oven glove, if necessary. Turn the pot (3) so that the steam is directed away from you.

8. Maintenance/cleaning

DANGER of burn injuries

Wait until the pot (3) has cooled down completely before cleaning it. Otherwise you could burn yourself.

DANGER of electric shock

Always remove the plug from the power socket before cleaning commences. Otherwise, there is a risk of electric shock.

Do not pour or spray any liquids onto the base (5) or immerse it into water or any other liquids. Otherwise, there is a risk of electric shock and a fire hazard due to short circuits.

WARNING of damage to property

Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a metal scourer) for cleaning purposes. Otherwise the kettle may be damaged.

• Rinse the inside of the pot (3) with clear water.
• Clean the outer surfaces of the pot (3) or base (5) with a slightly damp cloth. Use some washing up-liquid on the damp cloth for stubborn stains. Make sure to remove any detergent residue from the pot (3) and base (5) before using the kettle again. Dry the pot (3) and base (5) thoroughly before the next use.

You can use a cleaning or bottle brush with a long handle to remove stubborn stains from inside the pot (3).

When cleaning the bottom plate of inside the pot, add some lemon juice inside the pot (3) to remove stubborn stains more easily.

8.1. Descaling the pot (3)

Limescale may build up in the pot (3) over time. This can lead to loss of energy and shorten the pot's (3) service life. You should therefore remove the limescale as soon as it becomes visible.

• Use a descaling agent that is used for coffee machines and other household devices. Proceed as described in the instructions for the descaling agent.
• Rinse the pot (3) with plenty of clear water several times after descaling it.

8.2. Cleaning the limescale filter (2)

A limescale filter (2) is installed in the pot (3). You should clean the limescale filter from time to time. Empty the pot (3) and make sure it has cooled down.

Proceed as follows to clean the limescale filter (2):

- Remove the cooled down pot (3) from the base (5).

- Open the lid (13) by pressing the lid release button (1).

- To remove the limescale filter (2), reach carefully into the pot (3) with your hand as shown in the diagram. Place your thumb from above into the spout and press the catch (C) on the upper end of the limescale filter (2) downwards and towards the inside of the pot. Grip the angled tab (A) on the limescale filter (2) with your other fingers. Pull the lower edge (B) of the limescale filter (2) away from the housing of the pot and remove the limescale filter (2) from the pot (3).

- After cleaning, first place the lower edge (B) of the limescale filter (2) against the lower end of the spout from inside the housing of the pot. Grip the limescale filter (2) by the angled tab (A) and press it towards the spout until the catch (C) snaps into place.

- Close the lid (13) by pressing it down until it snaps into place.

8.3. Storing the device when not in use

If the kettle will not be used for a longer period of time, store it in a clean and dry place.

- Let the pot (3) cool down fully before you store it.

- Wrap the power cable (6) around the cable rewind under the base (5) and store the kettle in a safe, dust-free place.

9. Troubleshooting

If your kettle does not work as usual, use the following instructions to try and solve the problem. If working through the following tips does not eliminate the fault, please contact our hotline (see the 'Warranty information' section).

The kettle is not working

• The plug is not inserted. Insert the plug into the power socket.
• The power socket is faulty. Try the appliance in another power socket which definitely works.
• The pot (3) is not switched on. Press the on/off button 0/1 (9) in order to switch on the pot (3).
• The pot (3) has overheated and the overheating protection is preventing the device from switching on. Wait until the pot (3) has cooled down completely. Fill the pot (3) with at least 0.5 l of water (up to the '0.5 l MIN' mark).
• The pot (3) is not properly placed on the base (5). Place the pot (3) on the base (5) properly and press the on/off button (9) in order to switch on the pot (3).

The target temperature can only be set to a maximum of 90°C when using the keep-warm function.

- This does not indicate that the kettle is defective. The temperature range of the keep-warm function is 40°C to 90°C.

10. Environmental and waste disposal information

Devices marked with this symbol are subject to European Directive 2012/19/EU. Electrical and electronic devices may not be put in the household waste, but must be disposed of via designated public disposal centres. By properly disposing of the old device, you can avoid environmental damage and hazards to health. Further information regarding proper disposal of the old device can be obtained from your local authority or the shop where you purchased the device.

Make sure the packaging is disposed of in an environmentally friendly manner. Cardboard packaging can be put out for waste-paper collection or taken to public collection points for recycling. The plastic packaging used for your device is collected by your local waste management company and disposed of in an environmentally-friendly manner.

11. Marks of conformity

CE This device conforms to the fundamental requirements and other relevant regulations of the Low-Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the R&TTE Directive 2009/125/EC as well as the RoHS Directive 2011/65/EU.

In order to obtain the full EU Declaration of Conformity, send an e-mail to the following email address:

[e-mail]

12. Warranty information

Warranty of TARGA GmbH

Dear Customer,

This device is sold with a three-year warranty from the date of purchase. In the event of product defects, you have legal rights towards the seller. These statutory rights are not restricted by our warranty as described below.

Warranty conditions

The warranty period commences upon the date of purchase. Please keep the original receipt in a safe place as it is required as proof of purchase. If any material or manufacturing faults occur within three years of purchase of this product, we will repair or replace the product free of charge as we deem appropriate.

Warranty period and legal warranty rights

The warranty period is not extended in the event of a warranty claim. This also applies to replaced and repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the product has been unpacked. Any repairs required after the warranty period will be subject to charge.

Scope of warranty

The device was carefully manufactured in compliance with stringent quality guidelines and subjected to thorough testing before it left the works. The warranty applies to material and manufacturing faults. This warranty does not cover product components which are subject to normal wear and which can therefore be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries or components made of glass. This warranty is void if the product is damaged, incorrectly used or serviced. To ensure correct use of the product, always comply fully with all instructions contained in the user manual. The warnings and recommendations in the user manual regarding correct and incorrect use and handling of the product must always be observed and complied with. The product is solely designed for private use and is not suitable for commercial applications. The warranty is rendered void in the event of incorrect handling and misuse, if it is subjected to force, and also if any person other than our authorised service technicians interfere with the device. No new warranty period commences if the product is repaired or replaced.

Submitting warranty claims

To ensure speedy handling of your complaint, please note the following:

Before using your product for the first time, please read the enclosed documentation carefully. Should any problems arise which cannot be solved in this way, please call our hotline. - Always have your receipt, the product article number as well as the serial number (if available) to hand as proof of purchase. - If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault.

Service

Phone: 020 - 70 49 04 03

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: 02 - 20 09 025

E-Mail: [e-mail]

IAN: 280954

Manufacturer

Please note that the following address is not a service address. First contact the service point stated above.

TARGA

GmbH

Coesterweg 45

59494 SOEST

GERMANY