RG 2190W EU - Refrigerator INDESIT - Free user manual and instructions

Product type	Combined refrigerator with freezer
Brand	Indesit
Model	RG 2190W EU
Dimensions (H x W x D)	170 cm x 60 cm x 64 cm
Net weight	65 kg
Total capacity	242 litres (refrigerator 184 L, freezer 58 L)
Energy class	A+
Annual energy consumption	Approximately 260 kWh/year
Supply voltage	220-240 V, 50 Hz
Electrical power	100 W
Climate type	SN-ST (temperate to subtropical subclass)
Main functions	Adjustable thermostat, LED lighting, glass shelves, vegetable drawer, freezer compartment with bins
Defrosting	Manual (refrigerator) and automatic (freezer)
Maintenance and cleaning	Clean with a soft cloth and warm soapy water; do not use abrasive products
Safety	Automatic door closing, recessed handle, child lock system (depending on model)
Spare parts	Available on the official Indesit website or from authorized dealers
Repairability	Repairability index of 6.5/10 (estimate)
Noise level	40 dB (A)
Color	White

Frequently Asked Questions - RG 2190W EU INDESIT

How to adjust the temperature of the Indesit RG 2190W EU refrigerator?

Use the thermostat knob located inside the refrigerator, usually on the back wall. Numbers from 1 to 5 indicate colder temperature as the number increases. We recommend a setting of 3 to 4 for normal use.

Why is water accumulating at the bottom of the refrigerator?

This may be due to a blocked drainage hole. Clean the drain hole with a thin rod or pipe cleaner. Also ensure the evaporation tray is in place and clean.

How to defrost the freezer of the Indesit RG 2190W EU?

Unplug the appliance and remove the food. Leave the freezer door open to let the ice melt naturally. You can speed up the process by placing a container of hot water inside. Never use sharp tools to scrape off ice.

What to do if the refrigerator stops cooling?

First check that the appliance is properly plugged in and the thermostat is not set to '0'. Ensure the ventilation grilles are not blocked. If the problem persists, contact Indesit after-sales service.

Do the doors close automatically?

Yes, the Indesit RG 2190W EU model is equipped with an automatic closing mechanism that pulls the doors shut if left ajar. However, it is advisable to push them gently to ensure complete closure.

Can the refrigerator be installed in an unheated garage?

This model is designed for use in an ambient temperature range of 10°C to 38°C (climate SN-ST). In a very cold garage in winter, the refrigerator may not work properly. Avoid installing it in a place where the temperature drops below 10°C.

How to clean the inside of the refrigerator?

Unplug the appliance and remove all food and shelves. Use a soft cloth dampened with warm water and baking soda (one tablespoon per litre of water) to clean the surfaces. Rinse with a damp cloth and dry before putting the food back.

What is the capacity of the freezer compartment?

The freezer compartment of the Indesit RG 2190W EU has a capacity of 58 litres, allowing to store about 20 kg of frozen food.

How to reverse the door opening direction?

Door reversal is not recommended on this model. If necessary, contact an authorized Indesit technician to carry out the modification, as it involves disassembling the hinges and readjusting the components.

Where to find spare parts for the RG 2190W EU?

Spare parts (shelf, vegetable drawer, thermostat, etc.) are available on the official Indesit website (pieces-indesit.fr) or from authorized dealers. Use the model number to identify the exact part.

USER MANUAL RG 2190W EU INDESIT

Installation and use

Refrigerator

GB Two-doors refrigerator-freezer 8

Instructions for installation and use

To maintain the EFFICIENCY and SAFETY of this appliance, we recommend:

- call only the Service Centers authorized by the manufacturer

- always use original Spare Parts

Fig. 1

For proper freezing

Fig. 2

Fig. 3

Safety - a good habit to get into.

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimination of radio interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under no circumstances should it be installed outside even if protected by a roof. Leaving the appliance exposed to the rain and weather is exceedingly dangerous.
2. The appliance should be used only by adults and exclusively for storing foodstuffs in compliance with the instructions provided in this manual. Under no circumstances should children be allowed to operate, or tamper with, this product.
3. Do not attempt to operate or handle this appliance when barefoot, or with wet hands or feet.
4. It is highly recommended that you do not operate this appliance by connecting it to the power supply with extensions or multiple socket plugs. If the refrigerator has been installed between two cabinets, make sure that the supply

cord is not dangerously crimped or trapped beneath a heavy object.

1. Never pull the cable or the appliance to remove the plug from the socket; this is exceedingly dangerous.
2. Do not touch the internal cooling elements, especially if your hands are wet, since you could burn or hurt yourself.
3. Before doing any cleaning, disconnect the appliance from the electricity (by pulling out the plug or turning off the general switch in your home); it is not sufficient to place the temperature regulation knob on to cut off the power.
4. Before disposing of your old appliance, remember to break or remove the lock as a safety measure to protect children who might lock themselves inside the appliance when playing. In addition, if the appliance is a new one with a lock, keep the key out of the reach of small children.
5. If your appliance is not operating properly, read the chapter entitled, "Trouble Shooting", which might help you resolve the problem, before calling an after-sales service centre. Do not attempt to repair the appliance by tampering with the internal components.
6. If the power supply cord must be replaced, please contact one of our Customer Service Centers. In some cases, the connections are made using special terminals and in others a special tool must be used to access the connections.

Installation

Proper installation of the appliance is essential to ensure the best and most efficient performance of your appliance.

Ventilation

The compressor produces heat and therefore requires adequate ventilation; the appliance should therefore be installed only in a room with doors or windows in order to ensure proper air circulation. Remember that the room should not be too humid.

Install the appliance away from heat sources

The appliance should be installed at least 60 cm away from cookers, boilers, cookers with ovens, fireplaces and chimneys and at least 3 cm away from the wall.

Levelling

The floor should be perfectly level; if not, you can adjust the

feet at the front of the appliance.

Earthing

Before making the electrical connection, check that the voltage shown on the data plate, that you will find on the bottom left hand side of the appliance next to the crisper, corresponds to that of your home and that the socket is earthed in compliance with all current electrical regulations. If the system is not earthed, the manufacturer declines all liability for consequent damages or losses. Do not use adapters or multiple sockets.

Check the power load

The electrical socket must support the maximum power load of the appliance shown on the data plate (on the bottom left hand side of the appliance next to the crisper).

Before plugging the appliance to the mains

Stand the appliance upright and wait at least 3 hours before plugging the appliance into the mains to ensure proper performance.

A closer look

Thermostat knob for regulating the temperature

This knob is used to regulate the temperature in the two compartments with the following settings: Available:

● The refrigerator is off;

1 less cold;

5 colder

Shelf with egg compartment

Removable door shelf for food products

Removable door shelf for bottles

Adjustable feet

Fruit and vegetable drawer

Drainage system for defrost water

Removable height adjustable shelves

Light

Compartment for storing frozen foods, freezing fresh foods and making ice

How to Start the Appliance

NOTICE

After the appliance has been delivered, stand it in the upright position and wait approximately 3 hours before connecting it to the electrical outlet to guarantee that it operates properly.

Before placing foodstuffs in the refrigerator or freezer, clean the interior well with warm water and baking soda.

After putting the plug in the socket, make sure that the light is on inside the appliance and then turn the thermostat knob (A) to the "3" setting. After a few hours have passed, you can place fresh food in the refrigerator compartment and frozen foods into the freezer.

How to use the refrigerator compartment...

The thermostat automatically regulates the temperature inside the appliance

1 = less cold 5 = colder

It is recommended that a medium setting be used.

To increase the amount of space, optimize arrangement and improve appearance, this appliance has a “cooling area” located within the back panel of the refrigerator compartment. When the appliance is operating, this panel may be covered with frost or droplets of water depending on whether the compressor is operating or not at a given time.

Do not be concerned about this! The refrigerator is operating normally.

If the thermostat knob is positioned on higher settings while the refrigerator is heavily filled and the ambient temperature high, the appliance may run continuously, resulting in the formation of frost on the back cooling area. This will lead to an increase in energy consumption.

To avoid this situation, just turn the thermostat knob to a lower setting so that the appliance defrosts automatically.

Storing Food in the Refrigerator Compartment

Food Storage Time Location in the Refrigerator
Wrapped meat and cleaned fish(use plastic wrap or pack in plastic bags)	2 or 3 days	On the shelf above the vegetable crisper(which is the coldest area).
Fresh cheese 3 or 4 days		On the shelf above the vegetable crisper(which is the coldest area).
Eggs 1 month In special egg rack on door.
Butter, margarine On any shelf.
Cooked or precooked food(placer in air-tight containers and when cool store in refrigerator)	3 or 4 days On any shelf.
Sausages, salami, sandwich meats in general, fresh pasta, custards,puddings, chocolates, cream pastries, bread, dry pastries, red tomatoes	3 or 4 days On any shelf.
Bottled products, milk, drinks, yoghurt On special door shelves.
Fruits and legumes In vegetable crisper.

What Not to Store in the Refrigerator

Garlic (transmits odour), onions and leeks.

Bananas (they will turn black).

Citrus fruits.

Potatoes and root vegetables (store in dark, dry places).

- Within the refrigerator compartment, the air circulates naturally, with the colder air falling because it is heavier. This is the reason why meat and cheeses should be placed above the vegetable crisper.

- Please follow our instructions carefully on maximum storage time: any food, even the freshest, will not remain edible for any extended amount of time.

- Contrary to popular belief, cooked foods do not store any longer than raw food.

- Do not place liquids in containers without covering them because this will lead to an increase in the level of moisture within the refrigerator, causing the formation of frost.

- Be careful not to place containers (plastic or glass), food or other objects in direct contact with the cooling area of the back wall of the refrigerator. This could harm the food, increase energy consumption and facilitate the formation of condensate (on food, containers, etc.).

- The refrigerator compartment is equipped with convenient, removable shelves (Fig. 1) which can be adjusted for height using the shelf guides. This allows you to place even large containers and foodstuffs in the refrigerator.

Fig. 1

Freezing Foods Properly

- For the preparation of food to be frozen, please consult a specialized manual.

- Food that has been thawed, even partially, must not be refrozen: you must cook it in order to consume it (within 24 hours) or to freeze it once again.

- Fresh foods that you intend to freeze must not be placed in contact with those that are already frozen or those that have been fast-frozen. Rather, they must be placed atop the grate in the freezer compartment, in contact with the walls of the compartment (back or side) if possible. Please keep in mind that proper conservation of frozen foods depends on the speed with which they are frozen.

- During the freezing process, avoid opening the door of the freezer.

- The maximum daily quantity of food that can be frozen is indicated on the rating plate located to the left of the vegetable crisper.

- In order to freeze and then thaw foods optimally, it is recommended that you divide food into small portions so that they freeze quickly and uniformly. The packages should be clearly marked with the content and the date they were frozen.

- Do not open the freezer door in the event of a power failure or malfunction. This precaution will slow the rise in temperature within the compartment. If the door is not opened, frozen and fast-frozen foods will remain in their current state for approximately 9-14 hours.

- Do not place full bottles in the freezer: they could easily burst because all liquids increase in volume when they freeze.

- Fill the ice cube trays about 3/4 full.

- If the ambient temperature remains below 14°C for an extended period of time, the temperature needed for extended storage of food in the freezer will not be reached, resulting in reduced storage life of the food.

Tips on Saving Energy

- Install the Appliance Properly

In other words, away from sources of heat and direct sunlight, in a well ventilated room complying with the minimum distances indicated in the paragraph entitled, "Installation/Ventilation."

- Use the Right Temperature Setting

A setting which is too cold increases energy consumption.

- Do not Overfill

To conserve food properly, the cold air must circulate freely within the refrigerator. If it is overfilled, this will prevent proper air circulation, forcing the compressor to work continuously.

- Close the Doors

Open your refrigerator as little as possible because each time you do so you lose much of the cold air. To raise the temperature to the proper level again, the motor must work for a long time, consuming energy.

- Keep an Eye on the Seals

Keep the seals clean and make sure that they adhere well

to the door. This alone will ensure that no cold air escapes.

- No Hot Foods

A hot pot or pan placed in the refrigerator immediately raises the temperature several degrees. Let hot cookware and food cool to ambient temperature before placing them in the refrigerator.

- Defrost the Freezer

Check the thickness of the frost on the walls of the freezer and immediately defrost it if the layer of frost is too thick. (See the section entitled, "Keeping Your Appliance in Shape").

Keeping Your Appliance in Shape

Defrosting

Do not use mechanical devices or other tools to speed up the defrosting process, unless they have been recommended by the manufacturer.

How to Defrost the Refrigerator

This appliance defrosts automatically and the water is channeled to the back toward the drain installed for this purpose (fig. 2). Here, the heat produced by the compressor will make it evaporate. The only thing you must do is to periodically check and clean the hole of the drain, which is located behind the vegetable crispers, so that the water drains properly.

How to Defrost the Freezer

- Every so often, remove the frost with the scraper provided with the appliance (do not use knives or metal objects). - If the frost is more than 15 mm thick, the freezer must be defrosted.

Proceed as follows: turn the thermostat knob (A) to the setting ● Then wrap all the frozen and fast-frozen food in newspaper, placing it either in the refrigerator or in a cool place. Leave the freezer door open so that the frost thaws completely. You can speed this process by placing containers of warm water in the compartment.

Fig. 2

Cleaning and maintenance

Always unplug the appliance from the mains before cleaning.

• Your appliance is manufactured with hygienic, odourless materials. To preserve these characteristics, always use sealed containers for strong-smelling foods to avoid the formation of odours that are difficult to remove.
• Use only a water and bicarbonate solution: Clean the internal and exterior of your appliance with a sponge soaked in a warm water and sodium bicarbonate solution, which is also a good disinfectant. If you do not have any sodium bicarbonate at home, use neutral detergent.
• What not to use: Do not use abrasive detergents, bleach, or detergents containing ammonia. Never use solvent-based products.
• Dishwashable: All the removable parts can be cleaned by soaking in hot soapy water or detergent. If you own a dishwasher, you may wash these parts in the dishwasher. Remember to dry thoroughly before replacing them.
• What about the back panel? Dust may deposit on the back panel and affect the proper running of the appliance. To remove dust, vacuum away the dust very carefully using the appropriate vacuum cleaner accessory.
• Discontinued use of the appliance: If the appliance is not in use for any length of time, remember to clean the interior and dry thoroughly, leaving the doors open to prevent the formation of bad odours and mould.
• Replacing the light bulb. The bulb for lighting the interior of the appliance is located at the back of the thermostat box. Unscrew the burnt bulb and replace it with another bulb of no more than 15 Watt, follow the instructions illustrated in fig. 3.

Fig. 3

Is There a Problem?

The refrigerator does not function.

Have you checked whether:

• The main switch for the electricity to the apartment or home has been turned off;
• The plug is properly inserted in the outlet;
• The outlet is adequate; try inserting the plug into another outlet in the room.

The refrigerator and the freezer do not cool properly.

Have you checked whether:

• The doors do not close well or the seals are faulty; • The doors are left open too long;
• The thermostat knob is not on the proper setting;
• The refrigerator or freezer is overfilled.

The food in the refrigerator becomes too cold.

Have you checked whether:

• The thermostat knob is on the proper setting;
• The food is in contact with the back wall - which is the coldest part.

The motor runs continuously.

Have you checked whether

• The doors are not closed well or have remained open too long;
• The ambient temperature is too high;
• The thermostat knob is not on the proper setting

The appliance makes too much noise.

The gas refrigerant produces a slight noise even when the compressor is not running (this is not a defect).

Have you checked whether:

• The refrigerator is level. - The appliance was installed between cabinets or objects that vibrate and make noise.

There is water on the bottom of the refrigerator.

Have you checked whether:

- The hole for draining the water from the frost is clogged (see fig. 2).

If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre and inform them of: the type of problem, the abbreviation of the model name (Mod.) and the relative numbers (S/N) written on the rating plate located at the bottom left next to the vegetable crisper (see examples in the figures below).

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Fig. 1

For proper freezing

- Pay attention to the seals

Fig. 2

Fig. 3

Fig. 1

Fig. 2

Fig. 3

Is there a problem?

Fig. 1

Freezing

Fig. 2

Fig. 3

There is a problem

Fig. 1

For proper freezing

Fig. 2

Fig. 3

Some problems

Fig. 1

Freezing

Fig. 2

Cleaning

Bill. 3

Kuva 1

Kuva 2

Kuva 3

Belysning i kyldelen

Igångsättning

WARNING

Bild 1

Bild. 2

Bild. 3

Fig. 1

Frysning av fersk mat

Fig. 2

Fig. 3