EN4550 - Basket ETNA - Free user manual and instructions
Find the device manual for free EN4550 ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Etna |
| Model | EN4550 |
| Mounting Type | Under Cabinet / Wall Mount |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 12 cm (without flue) |
| Weight | 15 kg |
| Power Supply | 230 V / 50 Hz |
| Motor Power | 150 W |
| Number of Speeds | 3 |
| Extraction Capacity | 650 m³/h |
| Filter Type | Aluminum Grease Filter |
| Lighting | LED, 2 x 3 W |
| Control Type | Push Buttons |
| Exhaust Diameter | 150 mm |
| Energy Class | B |
| Noise Level (Max) | 65 dB(A) |
| Recirculation Mode | Optional (carbon filter required) |
| Maintenance | Clean grease filter every month; replace carbon filter every 3-6 months |
| Safety Features | Auto shut-off timer, motor overload protection |
| Spare Parts Availability | Filters, bulbs, motor available |
| Repairability Index | 7.5 / 10 |
| Warranty | 2 years |
Frequently Asked Questions - EN4550 ETNA
How do I install the Etna EN4550 range hood?
Installation must be done by a qualified electrician. Ensure the hood is mounted at least 65 cm above the cooking surface. Connect to a 230V outlet and secure it to the wall or cabinet with the provided brackets. For extraction mode, connect the exhaust duct.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every month or more frequently with heavy use. Wash it by hand with warm soapy water or in the dishwasher at low temperature. Ensure it is completely dry before reinstalling.
Can I use the hood in recirculation mode?
Yes, the EN4550 supports recirculation mode. You need to purchase a carbon filter (model CF4550) and install it behind the grease filter. Then adjust the air outlet to recirculate air back into the kitchen.
How do I replace the LED bulbs?
First, disconnect power. Remove the grease filter to access the bulb socket. Gently pull out the old LED bulb and insert a new one (3W, compatible with GU10 base). Reassemble and restore power.
Why is my hood making excessive noise?
Excessive noise may be due to a clogged filter, loose installation, or obstructions in the ductwork. Clean the filter, check all screws, and inspect the exhaust duct for blockages. If noise persists, contact support.
What is the maximum extraction capacity?
The maximum extraction capacity is 650 m³/h. This is achieved at the highest speed setting. For effective ventilation, use a duct diameter of 150 mm and keep ducts as short and straight as possible.
How do I reset the filter saturation indicator?
After cleaning or replacing the filter, press and hold the light button for 3 seconds until the indicator light turns off. This resets the timer.
Can I install the hood with a longer duct?
Yes, but longer and more curved ducts reduce efficiency. Keep the duct length under 3 meters, minimize bends, and use rigid metal ducts for best performance.
What safety features does the EN4550 have?
The hood includes an auto shut-off timer that turns off the motor after 15 minutes, and motor overload protection that stops the motor if it overheats. The casing is made of stainless steel for fire resistance.
Where can I find spare parts?
Spare parts like filters, LED bulbs, and motors are available from Etna's authorized service centers or online retailers. Use the model number EN4550 when ordering.
User questions about EN4550 ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual EN4550 - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EN4550 by ETNA.
USER MANUAL EN4550 ETNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETNA
Model : EN4550
Category : Basket