LV 460 a ix c ha - Dishwasher Hotpoint Ariston - Free user manual and instructions
Find the device manual for free LV 460 a ix c ha Hotpoint Ariston in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | Hotpoint Ariston |
| Model | LV 460 a ix c ha |
| Dimensions (W x H x D) | 60 x 85 x 60 cm |
| Net weight | 45 kg |
| Power supply | 220-240 V, 50 Hz, 10 A |
| Number of place settings | 14 place settings |
| Noise level | 49 dB(A) |
| Wash programmes | 6 programmes: Eco, Intensive, Rapid, Glass, Normal, Pre-wash |
| Additional functions | Delay start (up to 24 h), Extra Dry, Half-load |
| Energy class | E (former class A++) |
| Water consumption per cycle | 9.5 litres (Eco cycle) |
| Electricity consumption per cycle | 0.95 kWh (Eco cycle) |
| Maintenance and cleaning | Clean the filters, spray arms and door seal regularly |
| Safety | Child safety, overflow protection, door lock |
| Spare parts | Available on the official Hotpoint Ariston website |
| Repairability | Repairability index: 7.0 / 10 |
| Warranty | 2 years (parts and labor) |
| Country of origin | Italy |
| Supplied accessories | Cutlery basket, adjustable racks, water filter |
Frequently Asked Questions - LV 460 a ix c ha Hotpoint Ariston
How to install my Hotpoint Ariston LV 460 a ix c ha dishwasher?
Make sure the appliance is level and properly connected to the water supply and drain. Use the adjustable feet to stabilize the appliance. Refer to the installation diagram in the manual.
What to do if the dishwasher does not start?
Check that the door is properly closed, the programme is selected, and the power supply is connected. If the problem persists, refer to the troubleshooting section of the manual.
How to clean the dishwasher filters?
Remove the lower basket, unscrew the central filter and rinse it under running water. Also clean the fine filter. Reassemble everything. Repeat this operation every month.
Which detergent to use?
Use a specific detergent for dishwashers, regenerating salt and rinse aid. Follow the indicated dosages to avoid excessive foam.
How to adjust the salt level?
Open the salt reservoir cap, fill it with water then with specific salt. The salt indicator goes off after a few cycles. The water hardness setting is done via the control panel.
What does error code F12 mean?
The F12 code indicates a drainage problem. Check that the drain hose is not kinked or blocked, and clean the sump filter.
How to use the Delay start function?
Press the Delay start button several times to select a delay from 1 to 24 hours. The indicator flashes. Close the door and the cycle will start at the chosen time.
Why does the dishes remain wet after drying?
Use the Extra Dry programme or activate the Extra Dry option. Make sure the rinse aid is sufficient and the spray arms are not blocked.
Where to find spare parts?
Spare parts are available on the official Hotpoint Ariston website or from authorized dealers. Use the model number LV 460 a ix c ha to order.
How to unlock the child safety?
Press and hold the Lock button for 3 seconds until the indicator turns off. To activate, repeat the same operation.
User questions about LV 460 a ix c ha Hotpoint Ariston
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LV 460 a ix c ha - Hotpoint Ariston and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LV 460 a ix c ha by Hotpoint Ariston.
USER MANUAL LV 460 a ix c ha Hotpoint Ariston
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hotpoint Ariston
Model : LV 460 a ix c ha
Category : Dishwasher