VisaPure Advanced SC5371 - Face cleansing PHILIPS - Free user manual and instructions

Brand	Philips
Model	VisaPure Advanced SC5371
Category	Facial cleansing
Product type	Rotating electric cleansing brush
Dimensions (approximate)	6 x 6 x 15 cm
Weight (approximate)	200 g
Power	Rechargeable lithium-ion battery (AC adapter included)
Battery life	Approximately 2 weeks of daily use
Speeds	2 speeds: gentle and intense
Main functions	Gentle cleansing, massage, exfoliation
Supplied attachments	Normal brush, soft brush, massage cap
Waterproof	100% waterproof (use in shower)
Built-in timer	Auto shut-off after 2 minutes (30-second zone)
Charge indicator	LED light indicator
Care and cleaning	Rinse the attachment after each use; replace the attachment every 3 months
Safety	Do not use on irritated skin; suitable for sensitive skin
Spare parts	Replacement attachments, AC adapter
Warranty	2 years (depending on country)
Included accessories	1 charging base, 1 adapter, 3 attachments

Frequently Asked Questions - VisaPure Advanced SC5371 PHILIPS

How to charge the VisaPure Advanced SC5371?

Plug the AC adapter into the charging base and place the device on the base. The LED light flashes during charging and stays solid when fully charged. Charging time: approximately 6 hours.

Which attachments are supplied and how to use them?

The device is supplied with three attachments: normal brush for daily cleansing, soft brush for sensitive skin, and massage cap to stimulate circulation. Attach the desired head to the device until it clicks.

Is the device waterproof? Can I use it in the shower?

Yes, the VisaPure Advanced SC5371 is 100% waterproof and can be used in the shower. However, do not immerse the charging base.

How often should I replace the brushes?

It is recommended to replace the attachment every 3 months to ensure optimal hygiene and effective cleaning. Replacement indicators (colored bristles) fade over time.

How to clean the device after use?

Remove the attachment and rinse it with warm water. Wipe the device body with a damp cloth. Do not use abrasive products. Dry before reassembling.

Can I use the device every day?

Yes, daily use is possible. Use the gentle speed for sensitive skin. Limit the time to 1 minute per area (cheeks, forehead, chin).

What to do if the device does not turn on?

Check that the battery is charged. If the indicator does not light up, make sure the contact with the charging base is correct. If the problem persists, contact customer service.

Are the attachments compatible with other Philips models?

The attachments of the VisaPure Advanced SC5371 are compatible with most VisaPure brushes (SC5xxx series). Check compatibility on the Philips website.

How to travel with the device?

Ensure the battery is partially charged. Store the device in its travel pouch (not supplied). The AC adapter can be used worldwide with a plug adapter.

What is the product warranty?

Philips offers a 2-year warranty from the date of purchase. Keep your receipt as proof. The warranty covers manufacturing defects, but not normal wear of the brushes.

USER MANUAL VisaPure Advanced SC5371 PHILIPS

PHILIPS

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER

To reduce the risk of electrocution:

1. Always unplug the charging stand immediately after use, except when facial brush is (re)charging.
2. Do not place or store the charging stand where it can fall or be pulled into a tub or sink.
3. Do not place charging stand in or drop into water or other liquid.
4. Do not reach for a charging stand that has fallen into water. Unplug immediately.
5. Unplug and remove power supply cord from charging stand before cleaning.
6. The batteries used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C (212°F) or incinerate.
7. Keep the adapter dry (Fig. 2).

WARNING

To reduce the risk of burns, electrocution, fire, or injury to persons:

1. Charging stand should never be left unattended when plugged in.
2. Close supervision is necessary when this facial brush/charging stand is used by, on, or near children or invalids.
3. Use this facial brush/charging stand only for its intended household use as described in this manual. Do not use attachments not recommended by Philips North America LLC or Philips Electronics Ltd.
4. Never operate this facial brush /charging stand if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water while plugged in. For assistance, call 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only).
5. Keep the facial brush, charging stand, cord, plug and any attachments away from heated surfaces.
6. Never use while sleeping or drowsy.
7. Never drop or insert any object into any opening.
8. Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the adapter.
9. Do not operate or plug in charging stand outdoors or where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use this facial brush with a damaged or broken brush. Replace brush head immediately.
11. Use only the cord and charging stand provided to charge and (re)charge the facial brush.
12. Always attach plug to charging stand first, then to outlet. To disconnect, turn the facial brush 'OFF', then remove plug from outlet.
13. To prevent possible damage to the cord, do not wrap cord around the charging stand. Do not use an extension cord.
14. Never put facial brush or charging stand in direct sunlight or charge, use and store at a temperature below 50°F (10°C) and above 140°F (60°C).
15. A facial brush should never be left unattended while plugged in.
16. Do not insert metal-containing material into the socket for the facial brush plug.
17. Only use the power plug and other accessories supplied with the facial brush.

SAVE THESE INSTRUCTIONS

IMPORTANT: The power plug contains a transformer. Do not cut off the power plug to replace it with another plug as this will cause a hazardous condition.

1 Introduction

Thank you for choosing Philips VisaPure Advanced. Cleansing is an essential part of the daily skincare routine, but traditional methods do not always leave your skin as clean and radiant as it could be. That's why we developed VisaPure Advanced - our exciting new approach to facial cleansing. With VisaPure Advanced, you can enjoy healthy-looking, radiant skin, quickly and easily every day. VisaPure Advanced combines gentle rotations and sonic pulses that cleanse deeply, remove impurities and makeup, leaving skin feeling soft and fresh. Designed to complement your current routine, you can use VisaPure Advanced together with your current

cleanser and it can also help your favorite moisturizer absorb better into your skin. A Deep Pore brush head, a Precision brush head and a Revitalizing Massage head are included for all skin types. Additional brush heads for different skin types are available separately. Use VisaPure Advanced twice daily to enjoy healthy-looking, soft skin and reveal your natural radiance.

2 General description (fig. 1)

1 Handle 2 Charging light and battery low indicator 3 Speed indicator

• Speed one: gentle cleansing

• Speed two: deep cleansing

4 On/off button 5 Connection pin 6 Charging pins 7 Anti-roll ridge 8 Deep Pore brush head 9 Protective cap

10 Revitalizing Massage head 11 Precision Brush head 12 Socket for the appliance plug 13 Charging stand 14 Adapter 15 Appliance plug 16 Storage caddy 17 Travel pouch

This symbol on the appliance indicates that the facial brush can be used in both the bath and shower.

3 IMPORTANT INFORMATION

- Fully charge the facial brush before using and at least every 3 months to sustain battery life.

3.1 CAUTION

• Only use this facial brush on the face, neck and low neckline, excluding the sensitive area around the eyes. Do not use this facial brush for any other purpose.
• Do not use the facial brush more than twice a day.
• For hygienic reasons, it is recommended the facial brush be used by only one person.
• Do not use this facial brush if you have dry, chapped or sunburned skin, open wounds, suffer from skin diseases or skin irritations or if you are taking steroid-based medication.
• Do not use this facial brush with self-made cleansers or cleansers containing harsh chemicals or rough particles.
• Do not clean the facial brush and accessories in a dishwasher.

3.2 General

• If you have sensitive skin, select setting 1 the first few times you use the facial brush.
• Facial skin can get drier during colder months, so you may want to reduce the frequency, depending on the condition of your skin.

• Using the facial brush to remove makeup may discolor or stain the bristles. - Clean the facial brush and the accessories after each use. - An adapter plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adapter of the proper configuration for the power outlet. The charging plug will automatically convert to work on 100V to 240V AC systems. - To charge the battery, only use the detachable supply unit (SSW-2082 or SSW-2600) provided with the appliance (Fig. 3).

4 Preparing for use

4.1 Charging the facial brush

Charging the facial brush takes approximately 6 hours. A fully charged facial brush has a cordless operating time of up to 30 minutes.

1 Make sure the facial brush is switched off. 2 Insert the facial brush plug in the socket of the charging stand (1), put the adapter in the wall socket (2), remove the protection cap (3) and put the facial brush in the charging stand (4) (fig. 4).

Make sure the charging pins on the facial brush are connected properly with the contact points in the charging stand.

3 The charging light blinks white to indicate that the facial brush is charging. When the battery is fully charged, the charging light lights up white continuously (fig. 3).

4.2 Battery-low indicator

- When the battery is almost empty, the charging light blinks amber for 15 seconds. The battery still contains enough energy for a complete treatment (fig. 6).

To charge the facial brush, follow the steps in section 'Charging the facial brush'.

5 Using the facial brush

Make sure the facial brush is fully charged before you use it for the first time.

Caution: Wear a headband or tie all your hair securely away from your face to ensure no loose hair gets caught in the brush head during use.

Note:

You can use the facial brush in front of the sink, in the shower or bathtub.

5.1 Brush heads

• Deep pore brush head prevents and reduces the appearance of pores. Use daily.
• Precision Brush head for precision cleansing of hard to reach areas such as the nose area. • Revitalizing Massage head for a relaxing and revitalizing massage.
• Normal brush head for all skin types. Use daily. Sold separately.
• Exfoliation brush for all skin types. Use weekly. Sold separately.
• Sensitive brush head for normal to sensitive skin. Use daily. Sold separately.
• Fresh Eyes head for a boost of freshness to tired eyes. Sold separately.

5.2 Daily facial cleansing

5.2.1 Intelligent Head Recognition

VisaPure Advanced has Intelligent Head Recognition.

- The Precision brush head and the Revitalizing Massage head have specific levels of rotation and vibration.

• When you attach a different intelligent attachment and switch on the appliance, it recognizes the intelligent attachment.
• You will hear a beep and the intensity setting indications flash alternately.
• The appliance then activates a customized program for the intelligent attachment in use.

5.2.2 Intensity settings

You can choose between 2 different intensity settings depending on your personal preference.

• Intensity setting 1 for a gentle treatment.
• Intensity setting 2 for an intensive treatment.

The first time you use the facial brush, we advise you to select intensity setting 1. If you do not experience any skin reactions, you can start using the appliance at intensity setting 2.

Note:

Your skin might need to adapt to the new treatment just like it does with a new skincare product.

5.2.3 Skin zones

- The face can be divided into three zones: right cheek, left cheek and T-zone. The cheek zones include the chin, the area between nose and upper lip and the area between eyes and ears. The neck and lower neck can also be divided into three zones (fig. 7).

Note:

Do not use the facial brush on the sensitive skin area around the eyes.

5.2.5 Skin zone timer

When you switch on the facial brush, it works for three periods of 20 seconds. Between these periods, there is a short pause to indicate you should move the brush head to another skin zone.

5.2.6 Auto shut-off

The facial brush automatically switches off after one minute to prevent overtreatment.

5.3 Using the Deep Pore brush head

Note:

You can use the Deep Pore brush head twice a day.

1 Push the brush head onto the connection pin until it locks into position with a click (fig. 8). 2 Moisten your skin and the brush head with water. Apply the liquid cleanser to your face or the brush head directly. Do not use the facial brush with a dry brush head, as this can irritate the skin. 3 Place the brush head on your skin. 4 Press the on/off button once to switch on the facial brush. Press two times to switch off the facial brush or wait until it stops automatically after one minute (fig. 9). 5 Gently move the brush head across your skin while making horizontal movements. Do not press the brush head too hard onto the skin to make sure the treatment remains comfortable (fig. 10).

6 After 20 seconds, the facial brush briefly pauses to let you know that you have to move to another zone. Do not overdo the cleansing and do not cleanse any zone longer than 20 seconds.

5.4. Revitalizing Massage head

The Revitalizing Massage head is suitable for all skin types. We advise you to use it 2-3 times a week. Before you massage the skin, first cleanse your face with VisaPure Advanced.

5.4.1 The 3 minute Revitalizing Massage program

The 3 minute Revitalizing Massage program consists of 2 treatment periods of 1 1/2 minutes each. The Revitalizing Massage head is intended to treat the right and left cheek. The cheek zones include the chin, the area between the nose and upper lip and the areas between the eyes and ears.

Note:

Each treatment period has a specific rotation direction optimized for the skin zone treated. Do not use the Revitalizing Massage head on the sensitive area around the eyes.

5.4.2 Using the Revitalizing Massage head

Use the Revitalizing Massage head on clean, dry skin or after applying facial cream or oil to your skin.

1 Push the Revitalizing Massage head onto the connection pin until it locks into position with a click (Fig. 11).

2 Press the on/off button to switch on the appliance and choose your preferred setting.

Note:

When you attach a different head the appliance recognizes it. You will hear a beep and the intensity setting indications flash alternately (Fig. 12).

3 Place the Revitalizing Massage head on your right cheek. Gently move the head across your skin, from the nose towards the ear and repeat this movement (Fig. 13).

Note:

Do not push the head too hard onto the skin to make sure the treatment remains comfortable.

4 After 1 1/2 minutes, the appliance pauses briefly to let you know you should move it to the other cheek (Fig. 14).

5 When the program is finished, turn the appliance off.

5.5 Precision Brush head

The Precision Brush head is suitable for all skin types. We advise you to use it once a day. If you use the brush head more than once a day, make sure it is dry before using it again. When using the Precision Brush head, the ideal sequence consists of the following steps:

Caution: Take off your glasses and remove any nose or lip piercings before you use the Precision Brush around your nose, lips, or chin.

1. Remove makeup. Use the Deep Pore brush head to cleanse your cheeks and forehead, but not the nose or the area around the mouth.

2. Use the Precision Brush head to clean hard-to-reach areas such as around your nose, mouth, and chin area. 3. Finish with a massage treatment using the Revitalizing Massage attachment.

5.5.1 The 30-second Precision Brush program

With the Intelligent brush head recognition, the VisaPure Advanced handle recognizes the intelligent brush head and will run a customized program. The program consists of 2 treatment periods of 15 seconds each. Start on the right side of your nose or mouth. When the appliance pauses after 15 seconds, move to the left side of your nose or mouth (Fig. 15).

Note:

It is normal for your nose to feel slightly tender after the first treatment. If preferred, reduce the treatment intensity and duration.

5.5.2 Using the Precision Brush head

Make sure you only use the Precision Brush head on wet skin or in combination with a facial cleanser.

1. First cleanse your face with a cleansing brush. Only cleanse the cheeks and the forehead. You can leave the cleanser and water on your face while you switch heads to the Precision Brush head.

2. Push the Precision Brush head onto the connection pin until it locks into position with a click (Fig. 16).

3. Moisten the brush head and your face with water. Do not use a dry Precision Brush head as this can irritate the skin. If preferred, you can put a bit of cleanser onto the brush head. Gently rub the cleanser in-between the bristles so it stays on the brush head. Do not apply too much cleanser onto the brush head to prevent cleanser from splashing when the treatment starts.

4. Press the on/off button to switch the appliance on and choose your preferred setting.

Note:

When you attach a different brush head, the appliance recognizes it. You will hear a beep and the intensity setting indications flash alternately.

5 Place the Precision Brush head on the right side of your nose. Gently move the brush head up and down across the right side of your nose, and if preferred, also in the mouth area (Fig. 17).

Note:

Do not push the brush head too hard onto the skin, to make sure that the treatment remains comfortable.

Important: Do not use the Precision Brush head on dry skin, open wounds, around the eyes, on the lips, on or inside the ears or inside the nose.

6 After 15 seconds, the appliance pauses briefly to let you know you have to move it to the other side of your nose (Fig. 18). 7 When the program is finished, turn the appliance off. 8 After the treatment, rinse and dry your face.

6 Cleaning and maintenance

- Always turn the facial brush OFF and remove from charging stand before cleaning.

- Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol or acetone to clean the facial brush and accessories.

6.1 Cleaning the facial brush, Deep Pore brush head and charging stand

• For best results, clean the facial brush and brush heads with warm water after each use.
• Always remove the facial brush from the charging stand before cleaning.
• Never remove or replace brushes while the facial brush is turned on.
• Do not apply pressure or hard objects to brush heads as this may damage the brush heads and reduce cleansing effectiveness.
• Do not put the facial brush, brush heads or attachments in a dishwasher.
• Clean the charging stand and storage caddy with a soft, moist cloth. Allow to air dry thoroughly before attaching power cord. • Always keep the power cord and adapter dry. Never rinse it under the tap or immerse in water.

1 Rinse the handle and brush head under the tap thoroughly with warm water (max 104°F/40°C) (fig. 19). 2 Remove the brush head from the handle and clean the back of the brush head and the connection pin of the facial brush under the tap (fig. 20). 3 Dry the facial brush and brush head with a soft towel being careful not to bend the brush bristles.

4 Unplug and remove cord from the outlet and charging stand (fig. 21). 5 Clean the charging stand and storage caddy with a soft, moist cloth (fig. 22). Allow to air dry thoroughly before attaching power cord.

6.2 Cleaning the Revitalizing Massage head

1 Thoroughly clean the Revitalizing Massage head with warm water and mild soap after each use. Shake off excess water. 2 Remove the Revitalizing Massage head from the handle and clean the back of head and the connection pin of the product under the tap. 3 Dry the Revitalizing Massage head with a soft towel or allow to air dry thoroughly.

6.3 Cleaning the Precision Brush head

1 Thoroughly clean the Precision Brush head with warm water and mild soap after each use. Shake off excess water. 2 Remove the Precision Brush head from the handle and clean the back of head and the connection pin of the appliance under the tap. 3 Dry the Precision Brush head with a soft towel or allow to air dry thoroughly. 4 You may let the brush head dry on the appliance in the charging stand (without the protection cap), or on the storage caddy.

5 Once the brush head is dry, you can use the protection cap to protect the bristles (during traveling or for storage). Do not cover the brush head with other materials. Make sure the brush head is dry before traveling.

Note:

Make sure you press the bristles back into shape, so they can dry properly and remain straight.

7 Storage

• Be sure the facial brush is turned OFF. Remove cord from outlet and facial brush before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.
• Do not wrap cord around the facial brush/charging stand when storing.
• Store the cord in a safe location where it will not be cut or damaged.
• Do not place or store the charging stand where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
• Store the facial brush with the brush head attached in the charging stand (fig. 23).
• When traveling or not in use, place the protective cap on the brush head (fig. 24).
• Allow facial brush and brush heads to air dry thoroughly before storing.

Note:

Never store a wet brush head in the protective cap.

7.1 Storing the Revitalizing Massage head and Precision Brush head

Store the attachments in a cool, dry place.

Note:

Never store a wet Revitalizing Massage head or Precision Brush head.

Note:

You can store the Precision brush head on the storage caddy alongside the other attachments, or in the charging stand while attached to the VisaPure Advanced handle.

8 Replacement

8.1 Brush head replacement

Worn bristles could lead to skin irritation. The Deep Pore brush head and the Precision brush head should be replaced every 3 months. The Revitalizing Massage Head should be replaced after one year of use, or immediately if it is damaged.

Replacement brush heads and additional brush head types are sold separately and may be purchased at a store near you, or on our website www.philips.com/store

- Replacement NORMAL Brush Head Model SC5990/10 – For normal, combination or oily skin. For daily use.

• Replacement EXFOLIATION Brush Head Model SC5992/10 – For all skin types. For weekly use.
• Replacement SENSITIVE Brush Head Model SC5991/10 – For normal to sensitive skin. For daily use.
• Replacement DEEP PORE Brush Head Model SC5996/10 – Prevents and reduces the appearance of pores. For daily use.
• Replacement PRECISION Brush head Model SC6017/00 - for precision cleansing of hard-to-reach areas such as the nose area.
• Replacement FRESH EYES head Model SC6040/00 - for a boost of freshness to tired eyes.
• Replacement REVITALIZING Massage head Model SC6060/00- for a relaxing and revitalizing massage.

This facial brush has no other user-serviceable parts. For assistance call 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only).

9 Assistance

For assistance, visit our website:

www.philips.com/support or call toll free 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only).

Online information is available 24 hours a day, 7 days a week.

10 Battery Recycling

• This Philips facial brush contains a lithium-ion battery which must be disposed of properly (fig. 25).
• Contact your local town or city officials for battery disposal information. You can also call 1-800-822-8837 or visit www.call2recycle.org for battery drop-off locations.
• For assistance, visit our website, www.philips.com/support or call: 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only).
• Your appliance is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or www.recycle.philips.com.

11 Full Two-Year Warranty

Philips North America LLC (USA) and Philips Electronics Ltd (Canada) warrant this new product (except brush heads) against defects in materials or workmanship for a period of two years from the date of purchase, and agree to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage or batteries.*

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply go to www.philips.com/support for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips North America LLC. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, province to province or country to country. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.

* Read enclosed instructions carefully

In US only manufactured for:

Philips Personal Health

a division of Philips North America LLC

P.O. Box 10313, Stamford, CT 06904

Canada only imported by:

Philips Electronics Ltd.

281 Hillmount Road

Markham, ON L6C 2S3

PHILIPS and Philips Shield are registered trademarks of Koninklijke Philips N.V.

© 2017 Philips North America LLC.

All rights reserved.

12 45-Day Money-Back Guarantee

If you are not fully satisfied with your Philips VisaPure Advanced, send the appliance back and we'll refund you the full purchase price.

The VisaPure Advanced must be shipped prepaid by insured mail, insurance prepaid, have the original sales receipt, indicating purchase price and date of purchase, and the money-back guarantee return authorization form enclosed. We cannot be responsible for lost mail.

The VisaPure Advanced must be postmarked no later than 45 days after the date of purchase. Philips reserves the right to verify the purchase price of the appliance and limit refunds not to exceed suggested retail price.

To obtain money-back guarantee return authorization form, call 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only) for assistance.

Delivery of refund check will occur 6–8 weeks AFTER receipt of returned appliance.

13 FCC/ISED Regulatory notices

Modification statement

Philips has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment.

Interference statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Wireless notice

This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3 (B)

This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT SAFETY INSTRUCTIONS

All rights reserved.