USB-EXT - Wi-Fi repeater Crestron - Free user manual and instructions
Find the device manual for free USB-EXT Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | Crestron |
| Model | USB-EXT |
| Frequency Band | 2.4 GHz / 5 GHz (Dual-Band) |
| Maximum Data Rate | 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
| Antenna | Internal dual-band antennas |
| Ports | 1 x Gigabit Ethernet (RJ-45), 1 x USB 2.0 Type-A |
| Power Supply | 5V/2A DC via micro-USB or included power adapter |
| Power Consumption | 5W (typical) |
| Dimensions (W x D x H) | 95 mm x 60 mm x 20 mm |
| Weight | 120 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Wireless Security | WPA2-PSK, WPA3-PSK |
| Encryption | AES |
| Operation Modes | Repeater, Access Point |
| USB Function | Share USB storage or printer over network |
| Setup Method | Web interface or Crestron Toolbox |
| LED Indicators | Power, Wi-Fi, LAN, USB |
| Compliance | FCC, CE, RoHS |
Frequently Asked Questions - USB-EXT Crestron
What is the default IP address of the Crestron USB-EXT?
The default IP address is 192.168.1.200. You can access the web interface through this address after connecting to the device.
How do I reset the Crestron USB-EXT to factory defaults?
Press and hold the reset button on the device for 10 seconds using a paperclip. The device will reboot with factory settings.
Can the USB-EXT work as a standalone access point?
Yes, the device can operate in Access Point mode. You can switch modes via the web interface under 'Operation Mode'.
What is the maximum range of the Wi-Fi repeater?
In optimal conditions, the range is up to 100 meters outdoors and 30 meters indoors. Actual range depends on obstacles and interference.
Does the USB port support external hard drives?
Yes, the USB 2.0 port supports FAT32 and NTFS formatted drives up to 2TB. You can share files over the network.
How do I update the firmware?
Download the latest firmware from Crestron's website, then upload it via the web interface under 'Administration' > 'Firmware Upgrade'.
Can I use multiple USB-EXT units to extend USB over long distances?
No, the USB-EXT is designed as a Wi-Fi repeater with USB sharing, not as a dedicated USB extender. For USB extension, consider Crestron's dedicated USB extender products.
What security protocols are supported?
The device supports WPA2-PSK and WPA3-PSK with AES encryption for secure wireless connections.
How do I connect the USB-EXT to my existing Wi-Fi network?
Use the WPS button or access the web interface, scan for networks, select your SSID, and enter the password. The device will create a new extended SSID.
What should I do if the device is not detected after setup?
Ensure the power adapter is connected, check the LED indicators. If the Wi-Fi LED is off, press the WPS button. You can also connect via Ethernet temporarily to reset.
User questions about USB-EXT Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual USB-EXT - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. USB-EXT by Crestron.
USER MANUAL USB-EXT Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : USB-EXT
Category : Wi-Fi repeater