LES1332A - Server Black Box - Free user manual and instructions
Find the device manual for free LES1332A Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Model | LES1332A |
| Brand | Black Box |
| Form Factor | 1U |
| Dimensions (H x W x D) | 1.75 x 17.2 x 14.8 in (44 x 437 x 376 mm) |
| Weight | Approx. 18 lb (8.2 kg) |
| Power Supply | Dual, hot-swappable, 550W each |
| Voltage | 100-240 V AC, 50-60 Hz |
| Processor | Intel Xeon Scalable (dual socket) |
| Memory | Up to 512 GB DDR4 ECC |
| Storage | Up to 8 hot-swappable SATA/SAS drives |
| Networking | Dual Gigabit Ethernet ports |
| Remote Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 41°F to 95°F (5°C to 35°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 10% to 80% non-condensing |
| Certifications | FCC, CE, UL |
| Warranty | 3 years limited |
| Included Accessories | Power cords, rack rails, documentation |
| Cleaning Instructions | Use dry cloth; avoid liquids |
| Repairability | Hot-swappable components; user replaceable |
Frequently Asked Questions - LES1332A Black Box
How do I rack-mount the Black Box LES1332A server?
The server comes with rack rails. Attach the rails to the rack posts, then slide the server onto the rails and secure with screws. Refer to the manual for detailed steps.
What is the default IPMI login?
The default username is admin and the password is typically admin or printed on a label on the chassis. Reset after first login.
How do I install hard drives in the LES1332A?
Open the front bezel, release the drive bay lever, insert the drive into the tray, and latch it. The drives are hot-swappable; no tools required.
Can I use SSDs instead of HDDs?
Yes, the server supports both SATA and SAS drives, including SSDs. Ensure they are 2.5-inch or 3.5-inch as per the tray.
What is the maximum memory supported?
The LES1332A supports up to 512 GB of DDR4 ECC memory across 16 slots. Use registered modules.
How do I reset the BIOS settings?
Locate the CMOS jumper on the motherboard, move it to the clear position for 10 seconds, then return. Alternatively, remove the battery for 30 minutes.
Does the server support dual power supplies?
Yes, it comes with dual hot-swappable 550W power supplies for redundancy. Each connects to a separate AC source.
How do I update the firmware?
Download the latest firmware from the Black Box support site. Use the IPMI web interface or bootable USB to apply the update.
What should I do if the server overheats?
Check that fans are spinning and intake/exhaust are not blocked. Ensure ambient temperature is below 35°C. Replace faulty fans if needed.
How do I clean the server?
Power off and unplug. Use a dry, lint-free cloth to wipe the exterior. Compressed air can be used for internal dust. Do not use liquids.
User questions about LES1332A Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual LES1332A - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LES1332A by Black Box.
USER MANUAL LES1332A Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : LES1332A
Category : Server