LES1204A-R2 - Server Black Box - Free user manual and instructions
Find the device manual for free LES1204A-R2 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Black Box |
| Model | LES1204A-R2 |
| Form Factor | Rackmount 1U |
| Dimensions (W x D x H) | 482 mm x 550 mm x 44 mm |
| Weight | 12 kg |
| Power Supply | Redundant 500W |
| Input Voltage | 100-240 V AC |
| Cooling | Dual fans with variable speed |
| Management | IPMI 2.0 with dedicated LAN |
| Network | 2 x Gigabit Ethernet |
| Storage | Up to 4 SATA/SAS drives |
| Memory | 4 x DDR4 DIMM slots, up to 64 GB |
| Processor | Intel Xeon E-2300 series (single socket) |
| Expansion Slots | 1 x PCIe 4.0 x16 |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, FCC, RoHS |
| Maintenance | Tool-less access to internal components |
| Repairability | Modular design for easy replacement |
| Spare Parts | Available through Black Box support |
Frequently Asked Questions - LES1204A-R2 Black Box
How do I install the server in a rack?
Attach the included rack rails to the server and slide it into a standard 19-inch rack. Secure the front ears with screws. Refer to the user manual for detailed instructions.
How do I access the BIOS?
During system boot, press the Delete or F2 key when prompted on the screen to enter the BIOS setup utility.
How do I replace a hard drive?
The server supports hot-swap drives. Push the release button on the drive tray, pull the tray out, replace the drive, and reinsert the tray. The drive should be detected automatically.
What do the front panel LEDs indicate?
There are typically LEDs for power, network activity, hard drive activity, and system health. Refer to the user manual legend for specific color codes.
How do I reset the IPMI password?
To reset the IPMI password, boot the server and press F4 to enter IPMI configuration, or use the IPMI web interface with administrative privileges to change the password.
How do I update the firmware?
Download the latest firmware from the Black Box support website. Use the IPMI web interface or a bootable USB to apply the update. Follow the instructions in the release notes.
What should I do if the server does not power on?
Check that the power cables are securely connected, the power switch is on, and the power supply modules are functioning. Test with a known working outlet. If the issue persists, contact support.
How do I perform a factory reset?
To factory reset the server, you may need to clear CMOS by moving the jumper on the motherboard. Refer to the user manual for the exact jumper location and procedure.
What are the recommended maintenance intervals?
Regularly clean dust filters every 3 months, check fan operation, and update firmware annually. Perform full system backup before any major updates.
How do I obtain spare parts?
Contact Black Box technical support or visit their official website to order spare parts. Use the model number LES1204A-R2 for accurate ordering.
User questions about LES1204A-R2 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual LES1204A-R2 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LES1204A-R2 by Black Box.
USER MANUAL LES1204A-R2 Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : LES1204A-R2
Category : Server