RACM5002 - Air-conditioner RCA - Free user manual and instructions
Find the device manual for free RACM5002 RCA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable monoblock air conditioner |
| Cooling power | 12,000 BTU/h (3.5 kW) |
| Recommended cooling area | Up to 30 m² |
| Dimensions (L x W x H) | 45 x 35 x 70 cm |
| Net weight | 25 kg |
| Power supply | 230 V / 50 Hz |
| Power consumption (cooling) | 1,200 W |
| Energy class | A |
| Refrigerant | R32 |
| Noise level (max) | 65 dB(A) |
| Operating modes | Cooling, dehumidification, ventilation |
| Dehumidification capacity | 1.5 L/h |
| Number of fan speeds | 3 |
| Adjustable thermostat | Yes, from 16 °C to 30 °C |
| Remote control included | Yes |
| Programmable timer | Yes, up to 24 h |
| Filter type | Washable air filter |
| Filter maintenance | Clean every 2 weeks with warm water |
| Auto shut-off function | Yes (timer and anti-freeze protection) |
| Condensate water tank | 1.5 L (continuous drainage possible) |
| Exhaust kit | Flexible window kit (length 1.5 m) |
| Manufacturer warranty | 2 years |
| Country of manufacture | China |
Frequently Asked Questions - RACM5002 RCA
How to install the exhaust kit of the RACM5002 air conditioner?
The exhaust kit attaches to a sliding or casement window. Open the window, place the provided panel in the opening, then connect the hose to the back of the unit. Ensure that the hot air is exhausted outside without obstruction.
What to do if the appliance doesn't cool enough?
First, check that the air filter is clean; clean it if necessary. Ensure the door and windows of the room are closed. Also check that the exhaust kit is not obstructed and that the set temperature is low enough.
How to clean the air filter?
Turn off the appliance and unplug it. Remove the filter by sliding it upward. Wash it with warm water and mild detergent, dry it completely in the air before reinserting. Do not use abrasive products.
The air conditioner makes abnormal noise, what to do?
Check that the appliance is level and on a stable surface. Ensure no objects are in contact with the grilles. If the noise persists, contact after-sales service.
How to empty the condensation water tank?
The tank is located at the back of the appliance. When full, a light turns on. You can empty it manually or connect a continuous drainage hose (not supplied) for automatic drainage.
The remote control doesn't work, what to check?
First check the batteries: replace if necessary. Ensure no obstacle blocks the signal between the remote and the appliance. If the problem persists, reset the appliance by unplugging it for 10 minutes.
What is the power consumption in standby mode?
Standby power consumption is less than 1 W. For optimal energy savings, unplug the appliance when not in use for an extended period.
Can I use the air conditioner without the exhaust kit?
No, the air conditioner must be used with the exhaust kit to expel hot air. Without it, the appliance cannot cool properly and may overheat.
How to set the timer?
Press the 'Timer' button on the remote or control panel. Use the arrows to set the number of hours (1 to 24). The timer can be programmed for auto shut-off or delayed start.
What to do if error code 'E1' appears?
Code 'E1' indicates a temperature sensor fault. Turn off the appliance, unplug it for 10 minutes, then plug it back in. If the error persists, contact an authorized technician.
User questions about RACM5002 RCA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual RACM5002 - RCA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RACM5002 by RCA.
USER MANUAL RACM5002 RCA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCA
Model : RACM5002
Category : Air-conditioner